Download

Download Manuals, Datasheets, Software and more:

DOWNLOAD TYPE
MODEL or KEYWORD

Feedback

Datasheets, Manuals, and Software Downloads

While we’re happy to “talk tech” with you all day long, we know you’re in a hurry.

So we’ve made it easy for you to download product manuals, datasheets and downloadable software which includes firmware, drivers, etc. for all our current products, and many discontinued products as well. Just tell us which product you’re using, and we’ll provide you with list of latest documents and resources that you can download.

The product model you have chosen is currently available for purchase. The following support information is available.

  • FAQS FAQ ID
    2450 - Range Compliance: Source limited unexpectedly due to low Measurement Range
    Question: When we try to read the measurements from our 2450 instrument it causes any output voltage to automatically be 1.154 volts into a DMM, which is below the programmed value. Answer:  There is a condition on 24xx series SMUs called ‘range …
    KB-01028
    Sink function doesn't go to zero when not initialized
    Question: I've set my 2450 to sink 100mA. When I enable the load it sinks 100mA, but when I disable the load with blue button in the corner, it still sinks 10mA when the output if off. I want it to go to zero mA load. Answer: The 2450 SMU is a four …
    KB-01047
    Sweep: Can I use an external trigger to stop a SourceMeter sweep?
    Question: Sweep: Can I use an external trigger to stop a SourceMeter sweep? Answer: The SourceMeter trigger model does not have provisions for stopping a sweep using a trigger signal. However, there is a way to accomplish this by using the …
    KB-01468
    Speed: What is NPLC?
    Question: Speed: What is NPLC?   Answer: The Number of Power Line Cycles (NPLC) indicates how long an input signal is integrated to obtain a single measurement. Noise introduced from the power line tends to be periodic. If the A/D converter …
    KB-01485
    Remote Operation: Why do I get a VISA timeout (BFFF0015) using RS-232 with a SourceMeter?
    Question: Why do I get a VISA timeout (BFFF0015) using RS-232 with a SourceMeter?   Answer: When programming a SourceMeter through the VISA layer into RS-232, the use of SCPI commands is required. However, there are additional subtle requirements …
    KB-01460
    Ohms: What is AUTO or MANUAL mode when measuring Resistance with a 2400?
    Question: Ohms: What is AUTO or MANUAL mode when measuring Resistance with a 2400? Answer: What is the difference between Auto and Manual mode for resistance in the Model 2400? The AUTO resistance measuring mode of the Model 2400 configures the unit …
    KB-01492
    How do I create an I-V Characterizer test that uses more than one SMU Instrument?
    Question: How do I create an I-V Characterizer test that uses more than one SMU Instrument? Answer: Use the “Instruments” button in the I-V Characterizer app toolbar to access the “Add Channels” button to add more SMU instruments to your test.   You …
    KB-01364