Live Chat with Tek representatives. Available 6:00 AM - 4:30 PM PST.
TekScope™ PC Analysis Software
Get the analysis capability of an award-winning oscilloscope on your PC. Analyze waveforms anywhere, anytime. The basic package is free and lets you scale and measure waveforms. Purchased options add advanced capabilities such as multi-scope analysis, bus decoding, power analysis and jitter analysis.
Register for free TekScope software and learn about premium analysis options, or if you are already a registered user you can log in here.REGISTER NOW
Oscilloscope analysis without the oscilloscope
Analyze waveforms just as you would on your scope, without the need for the scope. Work anytime, anywhere.
- Analyze waveform files from Tektronix oscilloscopes, or other instruments
- Remotely connect to Tektronix oscilloscopes to acquire data in real time
Share data with your colleagues and customers
Stop sending stacks of static screenshots and send entire datasets instead. Your fellow engineers will be able to rescale waveforms and take measurements as if they were sitting in front of the oscilloscope.
Synch waveforms from multiple scopes
Turn up to four scopes into a single virtual instrument. View and analyze data from multiple scopes on the same screen, with a single set of controls.
- Rearrange channels
- Group channels
- Pan and zoom
- Add cursors or automated measurements
Advanced analysis -- even if your scope isn’t equipped for it
Boost the analysis available on your scope with advanced capabilities like bus decoding, spectrum analysis, and jitter analysis.
- The same intuitive user interface as the 4/5/6 Series MSOs
- Supports most waveform files (.wfm, .isf, .csv, .h5, .tr0, .trc, and .bin)
- Flexible licensing lets you add options you need, when you need them.
|TEKSCOPE-MULTI||Multi-Scope Analysis: Remotely connect to multiple oscilloscopes to view and analyze real-time data from many channels simultaneously. Connect up to 4 scopes and 32 channels.||
|TEKSCOPE-ENTRY||Remotely connect and acquire data directly from bench oscilloscopes. Perform analysis and decode essential protocols - I2C, SPI, RS-232/422/485/UART, CAN, CAN-FD, LIN||
|TEKSCOPE-DJA||Advanced Jitter Measurements and Eye Analysis||
|TEKSCOPE-DECODE||I2C, I3C, SPI, RS-232, SPMI, I2S, LJ, RJ, TDM, CAN, CAN-FD, LIN, FlexRay, SENT, 100BASE-T1 Automotive Ethernet, MIL-STD-1553, ARINC-429, SpaceWire, USB 2.0, eUSB2, PSI5, SVID, 10BASE-T / 100BASE-TX Ethernet, MDIO, NRZ, 8b/10b, D-PHY, Manchester, SDLC||
|TEKSCOPE-PWR-ELC||Power Electronics: Advanced Power Measurements & Analysis, Magnetics Analysis, Inverter Motor Drive Analysis||
|TEKSCOPE-PWR-INT||Power Integrity: Digital Power Management and Analysis, Power Management Serial Decode and Analysis (SPMI)||
|TEKSCOPE-SV||Spectrum View: spectrum analysis||
This cross-reference lists licenses for TekScope PC software and options for 4/5/6 Series MSOs that provide the same analysis capabilities. TekScope PC enables you to manipulate and analyze oscilloscope data from home, at your desk or anywhere you want, without tying up a scope. Multi-scope analysis is only available with TekScope software.
Features and options for TekScope PC Software and those sold with your scope, while similar, are independent. In order to perform pc-based analysis you only need the appropriate TekScope license. You don’t need to have the option installed on your oscilloscope. TekScope licenses do not enable features on your oscilloscope and oscilloscope options do not enable advanced analysis with TekScope.
|Jitter and Eye Analysis||TEKSCOPE-DJA||DJA|
Advanced Power Measurements
Inverter Motor Drive Analysis
Digital Power Management
Power Management Serial Analysis
|Spectrum View RF||TEKSCOPE-SV||SV-RFVT|
|Multi-Scope Analysis||TEKSCOPE-MULTI||----- N/A -----|