MIPI

Tektronix offers MIPI designers – such as those working on autonomous driving systems, in-vehicle infotainment or other mobile devices – a portfolio of MIPI PHY transmitter, receiver and protocol test solutions for M-PHY, D-PHY and C-PHY. These solutions are keeping pace with the rapidly changing MIPI standards landscape, giving designers the future-proof test solutions they need to efficiently bring new products to market.

NEW! Industry’s first receiver test solution with 100 percent coverage of the MIPI Alliance’s recently released D-PHY v.2.0 specification along with full support for the C-PHY v1.1 receiver test specification.

Transmitter & Receiver Testing with Tektronix Oscilloscopes, AWGs, BERTs and Software

Library

Title
MIPI Debug and Conformance Testing Challenges and Solutions View the slides from the presentation, MIPI High Speed Serial Technologies: Debug & Conformance Testing Challenges and Solutions, created by Tektronix' Ramesh P.E, Principal Engineer and Parthasarathy …
A Creative Solution for MIPI D-PHY Rx Validation In this case study, Narender Singh, Staff Engineer at NXP Semiconductors, describes an innovative method using a DPO70000C Series oscilloscope and MIPI D-PHY transmitter (Tx) compliance test software …
The Basics of Serial Data Compliance and Validation Measurements High-speed serial bus architectures are the new norm in today’s high-performance designs. While parallel bus standards are undergoing some changes, serial buses are established across multiple markets …
Understanding and Characterizing Timing Jitter Primer Timing jitter is the unwelcome companion of all electrical systems that use voltage transitions to represent timing information. Historically, electrical systems have lessened the ill effects of …
Triggering Fundamentals With Pinpoint® Triggering and Event Search & Mark for DPO7000 Introduction The oscilloscope provides a window into the world of electrical signals. Early oscilloscopes could display only repetitive or continuous electrical events, which limited …
TekExpress Software and MIPI® Physical Layer and Protocol Layer Testing Understanding and performing MIPI® D-PHY physical layer, CSI and DSI protocol layer testing with Tektronix TekExpress software and oscilloscopes. Introduction Currently many technologies are used …
Debugging Serial Buses in Embedded System Designs Learn the basics of the hardware protocols of the most common serial buses, such as I2C, SPI , USB, RS-232/422/485/UART, CAN, CAN FD, LIN, FlexRay, Ethernet, and I2S/LJ/RJ/TDM. Find out how to use …
Probing Tips for High Performance Design and Measurement When a high performance system or component needs to be verified, it often requires attaching an oscilloscope probe. For high speed circuits, the effect of attaching a probe often cannot be ignored …
Understanding and Performing MIPI M-PHY Physical and Protocol Layer Testing Review this application note for background and how to perform MIPI M-PHY testing, including Transmitter configurations and testing challenges, different signal generation requirements for Receiver …
Automated Compliance Testing of MIPI D-PHY Physical Layer The MIPI Alliance has defined tests to ensure that MIPI D-PHY transmitter designs conform to MIPI standards. D-PHY compliance testing is usually performed using an oscilloscope and may be automated …
Oscilloscope Probing for MIPI M-PHY TX Measurements Overview The MIPI® Alliance has established specifications for standard interfaces used in mobile electronics. While the MIPI® standards define several physical layers, the MIPI M-PHY …
Decoding and Searching MIPI I3C Bus Activity with an Oscilloscope THIS APPLICATION NOTE Gives a brief orientation on the physical layer and packet structures of I3C with the goal of providing just enough detail to help with …

Title
PHY Layer Testing for MIPI DPHY MPHY Bus Compliance
HDMI 20 Webinar Development & Testing of Next Generation HDMI Interfaces.
MIPI C-PHY D-PHY Webinar MIPI alliance standards have been driving the adoption of newer features and higher data rates for emerging mobile applications. Oscilloscope-based protocol layer validation enables isolating …
Demystify MIPI D-PHY and C-PHY Transmitter and Receiver Physical Layer Test During this webinar, you'll gain an understanding of MIPI test challenges for both MIPI high-speed physical layers. You'll also get useful tips and technical insights into characterizing and …
How to Design Longer Battery Life in Mobile Computing Devices This Tektronix Webinar discusses current monitoring over time to assess a semiconductor system's power performance with an emphasis on higher accuracy. In this 35 minute instructional webinar …

Title
MIPI D-PHY Test Method of Implementation (MOI) Overview:This selection of tests verifies various Electrical Characteristic requirements of D-PHY* products defined Section 8 of the D-PHY* Specification, version 0.9. Group 1 (8.1.x) verifies the …
MIPI C-PHY Receiver Conformance Test MOI Ver 1.2
MIPI® M-PHY Methods of Implementation This document contains he MIPI® M-PHY* Measurements & Setup Library Methods of Implementation (MOI) for Verification, Debug, Characterization, Conformance and Interoperability Test

MIPI

Featured Content

MIPI Testing Challenges and Solutions Poster

DPHY & MPHY Webinar

MIPI Webinar