Download
Download
Download Manuals, Datasheets, Software and more:
Contact us
Contact us
Live Chat with Tek representatives. Available 6:00 AM - 4:30 PM PST.
High Voltage Single Ended Probes
A high voltage single-ended probe is typically used for measuring ground referenced signals up to 40 kV. However, some single-ended probes are designed for instruments with isolated or floating inputs for measurements that are not ground referenced. Users should select probes with a low input capacitance specification (< 4 pF) to minimize the probe’s loading effect on the circuit because a probe with lower input capacitance will offer higher input impedance at higher frequencies.
Tektronix High Voltage Probe solutions offer:
- Best-in-class bandwidth up to 800 MHz
- Best-in-class probe loading with input capacitance as low as 1.8 pF
- The only products with 3rd Party Safety Certification (UL, CSA, ETL)
- Most extensive set of probe accessories
High Voltage Single Ended Probes
| Model | Bandwidth | Input Impedance | Maximum Voltage | List Price |
|---|---|---|---|---|
| P5122 | 200 MHz | 100 MΩ || 4 pF |
RMS: 1000 V CAT II |
US $328 Configure & Quote |
| P5100A | 500 MHz | 40 MΩ || 2.5 pF |
Peak: 2.5 kV |
US $556 Configure & Quote |
| P5150 | 500 MHz | 40 MΩ || 3.8 pF |
Peak: 2.5 kV |
US $588 Configure & Quote |
| TPP0850 | 800 MHz | 40 MΩ || 1.8 pF |
Peak: 2.5 kV |
US $937 Configure & Quote |
| P6015A | 75 MHz | 100 MΩ || 3 pF |
20 kV | US $2,660 Configure & Quote |
|
Passive High Voltage Probes
Literature Number: 56W-10262-13 |
Datasheet | |
|
The data sheet for my oscilloscope says that the vertical input sensitivity is 1 mV/div to 10 V/div in 1 MΩ mode. But I turn the Vertical Scale control fully clockwise and I can only get down to 10 mV/div. What am I doing wrong?
You probably aren't doing anything wrong. But you do have a 10X probe attached to that channel, right?
The 1 mV/div specs relate to the oscilloscope inputs. If the signal’s source impedance is relatively low (<< 1 MOhm), the signal’s frequency is …
|
Faq Id58571 | |
|
I have a probe that is no longer being manufactured. What is the replacement?
Please use our "Interactive Probe Selection Tool" to assist in locating a replacement probe for your Tektronix instrument. The interactive tool is located at /node/3661. If your instrument is not located in the upper instrument list, you can click …
|
Faq Id52846 | |
|
I have the P6015A probe without option 1R+ Probe Readout. Now I have a scope that will apply the 1000X attenuation factor automatically if the probe had that feature. Can it be added?
Yes, the BNC connector on the probe compensation box can be unsoldered, unscrewed, and replaced with the Tektronix part number 131-5320-00. All probe coding logic is contained in the new connector.
|
Faq Id61886 | |
|
How can I connect the P6015A High Voltage Probe to oscilloscopes with a 50 Ohm input such as the TDS6000+ TDS7000 and CSA7000 series?
The TCA-1MEG is designed to provide a 1 megohm input to Tektronix oscilloscopes with the TekConnect interface. Bandwidth and input voltage range are well within the the parameters needed for the P6015A. For more information on the TCA-1MEG click …
|
Faq Id61751 | |
|
Probes and Accessories
Declassification and Security
This document includes information that is necessary to clear or sanitize the product so it can be removed from a secured area, such as when returning the product for repair. Part Number: 071238400 |
Declassification | |
|
Tektronix Supplemental, 071296605
Product Information Sheet for People‚s Republic of China
This sheet contains supplemental product information for the People‚s Republic of China. Part Number: 071296605 |
User | |
|
Tektronix Supplemental, 071329304
Product Information Sheet for People‚s Republic of China
This sheet contains supplemental product information for the People‚s Republic of China. Part Number: 071329304 |
User | |
|
Tektronix Supplemental, 071329404
Product Information Sheet for People‚s Republic of China
This sheet contains supplemental product information for the People‚s Republic of China. Part Number: 071329404 |
User | |
|
P5122
200 MHz 100X High Voltage Probe
Instructions
This manual covers the operation of the probe and the standard accessories. Part Number: 071272003 |
User | |
|
P5100A
500 MHz 100X High Voltage Probe
Instructions
This manual describes the use of the probe and accessories. Part Number: 071288203 |
Primary User | |
|
P5100A & P5150
500 MHz High Voltage Probes
Technical Reference
This manual describes the procedures to verify the warranted specifications of the P5100A probe and to make internal adjustments to both probes. Part Number: 077053002 |
Service | |
|
TPP0850
800 MHz 50X High Voltage Probe
Instructions
This manual describes the use of the probe and accessories. Part Number: 071288402 |
Primary User | |
|
P5150
500 MHz 50X High Voltage Probe
Instructions
This document describes how to use the probe and accessories. Part Number: 071288501 |
Primary User | |
|
TPH1000
Probe Holder
Instructions
This document provides instructions for using the probe holder to easily probe circuits and test points for hands-free operation. Part Number: 071289400 |
Primary User | |
|
TPP0850 Probe
Describes the use of the probe and accessories
Instructions
This manual describes the use of the probe and accessories. Part Number: 071288400 |
User | |
|
P5100A
Describes the use of the probe and accessories
Instructions
This manual describes the use of the probe and accessories. Part Number: 071288200 |
User | |
|
Voltage Probe Standard Compliance Update
The following probes do not comply with changes resulting from Amendment 1 (2008) to the IEC / EN 61010-031:2002 Standard and are not intended to be sold or placed on the market in the European Union after March 1, 2011.
Read This First
Compliance Update Part Number: 061436800 |
User | |
|
P5122
200 MHz 100X High Voltage Probe
Instructions
This manual covers the operation of the probe and the standard accessories. Part Number: 071272001 |
Primary User | |
|
Probe Safety Information
Prevent unsafe practices - always use these probes with ground-referenced oscilloscopes.
Read This First
Prevent unsafe practices - always use these probes with ground-referenced oscilloscopes. Part Number: 071268200 |
User | |
|
P6015A
1000X High Voltage Probe
Instruction Manual
This document contains information that supports basic instrument operation as well as how to service to the module level. Part Number: 070822305 |
Primary User | |
|
P5120 200 MHz Passive High-Voltage Probe
200 MHz Passive High-Voltage Probe
Instructions
This document is targeted to product users and explains operation and/or installation procedures. It may also provide information about features and functions, applications and troubleshooting. Part Number: 071146300 |
Primary User | |
|
ABCs of Probes Primer
Precision Measurements Start at the Probe Tip
Probes are vital to oscilloscope measurements. To understand how vital, disconnect the probes from an oscilloscope and try to make a measurement. It can’t be done. There has to be some kind of …
Literature Number: 60Z-6053-14 |
Primer | |
|
Tektronix Probe Selection Guide
Tektronix probes ensure the highest signal fidelity possible from your device-under-test to your oscilloscope. With over 100 probe choices available, all perfectly matched to our industry-leading oscilloscopes, you can find the probe you need for …
Literature Number: 60W_14232_10 |
Product Selector Guide |