WLAN Testing and Analysis (IEEE 802.11) Testing and Analysis
Accelerate and Simplify Test and Analysis of 802.11 Wireless LAN Devices
Whether you are testing a new chipset, designing a new wireless module, or integrating a WLAN module into your latest design, Tektronix provides Wi-Fi physical layer (PHY) testing solutions to help you get the job done and get your design to market faster.
Check out the information below to learn more about best practices for WLAN testing, pre-compliance steps for success and how Tektronix solutions can help you pass your performance and compliance tests the first time.
This primer provides a general overview for each of the 802.11 standards, their PHY layer characteristics and their testing requirements. In this document, we use 802.11 and IEEE 802.11 interchangeably.
When you search for a Wi-Fi module for your application, there are many different kinds of solutions to choose from. Read this guide on best practices for selecting the optimal Wi-Fi chipset or module for integration.
This application note outlines the typical design cycle of using a prepackaged WLAN module and the potential pitfalls.
The RSA Series spectrum analyzers measure and test Bluetooth signals at a fraction of the price of a benchtop spectrum analyzer.
The oscilloscope that includes a logic analyzer, spectrum analyzer and protocol analyzer – all synchronized for an integrated view of your Bluetooth device.
RSA5000 spectrum analyzers detect, analyze and debug Bluetooth chips with 100% probability of intercept of signals as brief as 434 ns.
Use the one user interface for RF and Vector Signal Analysis for all Tek RF products. SVPC comes free with 17 measurements and is instantly upgradable with options simplifiying Bluetooth measurements and troubleshooting.
802.11 Wi-Fi Testing Made Easy
Download your poster today and enjoy the convenience of seeing all Wi-Fi standards at a glance. This poster will help you to understand and quickly reference new emerging Wi-Fi standards.
Wi-Fi: Overview of the 802.11 Physical Layer and Transmitter Measurements
Figure 1. The 802.11 standards have enabled millions of electronic devices to exchange data or connect to the internet wirelessly using radio waves. …
Spectrum Pre-compliance for Wireless LAN Regulatory Testing
The most common way to add wireless capability is to use a prepackaged WLAN module. While this approach greatly simplifies the process, it still has many challenges. This application note outlines the …
How to Select your Wi-Fi Module
When you search for a Wi-Fi module for your application, there are many different kinds of solutions to choose from. Read this guide on best practices for selecting the optimal Wi-Fi chipset or …
Baseband Response Characterization of I-Q Modulators
Learn how an arbitrary waveform generator (AWG) and a mixed domain oscilloscope (MDO) can be used for basedband frequency response, single-sideband suppression, amplitude and phase errors, and …
Wi-Fi Pre-Compliance Measurements
If you’re integrating a WLAN radio into your design, you probably have questions on how to pass compliance tests for FCC regulations. Surprisingly, only 1 in 10 engineers pass the first time. And …
Navigating the Road to WiGig
This webinar features Tektronix expert, Dorine Gurney, sharing her insights on the key factors to consider when performing transmitter testing to IEEE 802.11ad. Topics covered include:• What are the …