Expanding High-Speed Interface Probing Capabilities

The new Tektronix TriMode™ P7725  probe extends the P7700 Series probing platform to 25 GHz, expanding measurement coverage for today’s high-speed serial and memory standards. It supports the following:

  • DDR5/DDR6
  • LPDDR5/5x/6
  • HDMI 2.0/2.1/2.2
  • DisplayPort 1.4/2.1
  • MIPI C-PHY/D-PHY/M-PHY

Designed for use with the 7 Series DPO oscilloscope, the P7725 probe combines 25 GHz performance with a high-impedance RC input topology. This helps preserve waveform fidelity while providing the bandwidth needed to evaluate fast signal transitions, tight timing margins, and demanding signal-integrity requirements.

Download Flyer Now!

Download the flyer today to learn more about the new P7725 probe and 7 Series DPO.

New TriMode™ P7725 probe

Measurement-system distortion can obscure the details engineers rely on for eye-diagram, timing-margin, and signal-integrity analysis. The P7725 probe is designed to preserve signal fidelity at the probe point while providing flexible access to high-speed serial and memory signals.

Key benefits include:

  • Improved visibility into eye diagrams and timing margins by retaining the signal detail needed for margin decisions
  • Fast, clean step response with minimal ringing
  • High-impedance RC input topology that reduces loading at the probe point
  • Low-noise, low-jitter signal path when used with the 7 Series DPO
  • Automatic de-embedding to remove probe effects and streamline setup
  • Direct-access measurements up to 24 GHz with the new P77STFLXA24 solder-in flex tip
  • Coax-connected measurements up to 25 GHz with the P77C292MM 2.92 mm adapter

From direct probing at vias, backside pads, and SI interposers to coax-connected access for fixtures and boards, the P7725 probe lets engineers address multiple high-speed digital measurement workflows using one probing platform.

Learn more about the P7725 probe and 7 Series DPO total solution here.

Contact a Tektronix Representative

Fill out the form to connect with a Tektronix accountmanager who can discuss your application, measurement challenge, workflow, or business need and help identify the best next step.

Related Products

Tektronix P7720 for low voltage differential measurement

Low Voltage Differential Oscilloscope Probes

Differential probes for measuring high-speed I/O and low-amplitude signals.

7 Series DPO oscilloscope

7 Series DPO Digital Phosphor Oscilloscope

Unparalleled signal fidelity, high ENOB, low noise, low jitter and fast measurement throughout.  Bandwidth ranges from 8 GHz to 25 GHz with sample rate of 125 GS/s.

Download

Download Manuals, Datasheets, Software and more:

DOWNLOAD TYPE
MODEL or KEYWORD

Feedback