Call us at
Available 6:00 AM – 5:00 PM (PST) Business Days
Download Manuals, Datasheets, Software and more:
P6800/P6900 Series Logic Analyzer Datasheet
P6800/P6900 Series Datasheet
The products on this datasheet are no longer being sold by Tektronix.
View Tektronix Encore for reconditioned test equipment.
Check support and warranty status for these products.
- P6800/P6900 Series Logic Analyzer Datasheet
- Explore more Probes and Accessories models
Verification and debug of today's high speed, low voltage digital signals requires probing solutions that can accurately acquire from a wide variety of electronic designs and protect signal fidelity. Tektronix logic analyzer probes contain a variety of connectivity options that are engineered to ensure that signal acquisition is a true reflection of your design's performance.
Notice to EU customers
This product is not updated to comply with the RoHS 2 Directive 2011/65/EU and will not be shipped to the EU. Customers may be able to purchase products from inventory that were placed on the EU market prior to July 22, 2017 until supplies are depleted. Tektronix is committed to helping you with your solution needs. Please contact your local sales representative for further assistance or to determine if alternative product(s) are available. Tektronix will continue service to the end of worldwide support life.
- 20 kΩ input resistance
- 6.5 Vp-p dynamic range supports a broad range of logic families
- General-purpose probing allows flexible attachment to industry-standard connections
- Connectorless probing system eliminates need for onboard connectors
- Hardware debug and verification
- Processor/Bus debug and verification
- Embedded software integration, debug, and verification
Leading probe solutions for real-time digital systems analysis
P6800 and P6900 series probes
With the industry's lowest capacitance, the P6800 and P6900 Series logic analyzer probes for the TLA7000 Series protect the integrity of your signal - critical for connecting to fast buses where low intrusion is key to the proper operation of your design. Select from single-ended and differential probes and a variety of attachment mechanisms.
For applications where circuit board space is at a premium, the high-density P6900 Series with D-Max®Probing Technology offers the industry's smallest available footprint. For debugging the signal integrity glitches common on fast buses, the P6900 Series works with the TLA7Bxx and TLA7ACx modules and their iLink™ Tool Set capability to provide iCapture™ simultaneous digital-analog acquisition. This allows you to clearly see the time-correlated digital and analog behavior of your design, without the extra capacitance and setup time of double probing.
For differential signaling applications where signal integrity is critical, the high-fidelity P6980 and P6982 are perfect for those applications where noise performance is critical. In addition, the P6980 and P6982 can support the small voltage swings that differential signaling often requires. For board designs that do not include high-density probe footprints, the P6960 with its companion flying leadset or the P6910 provide the flexibility required to meet many different debug needs.
All specifications are guaranteed unless noted otherwise. All specifications apply to all models unless noted otherwise.
Compatible with TLA7AAx, TLA7ACx, TLA7NAx, TLA7BBx, TLA7BCx, and TLA6200
|Number of channels||34||34||34||34||34||17|
|Recommended use||Good signal density and quick reliable attachment. Not recommended for new designs. Use P6960 for new designs.||General-purpose applications||Best signal density and quick reliable attachment. Flying leads for general-purpose probing is optional.||Data rates in excess of 750 MHz (TLA7Bxx) or 450 MHz (TLA7ACx) with the best signal density.||Full differential probing with the best signal density.||Full differential with the best signal density for data rates in excess of 750 MHz (TLA7Bxx) or 450 MHz (TLA7ACx).|
|Attachment to target system||Compression Elastomer||Fits 0.100 in. square pin configurations; flying-leads, solder-in||D-Max® probing technology compression cLGA||D-Max® probing technology compression cLGA||D-Max® probing technology compression cLGA||D-Max® probing technology compression cLGA|
- Input resistance
20 kΩ to Ground, typical
- Input capacitance
- 1.3 pF
- All others
- 0.5 pF
- Minimum digital swing
P6910 P6860, P6960, P6962, P6964 P6980, P6982 150 mV single-ended 300 mV single-ended 150 mV differential each side
P6910 P6860, P6960, P6962, P6964 P6980, P6982 100 mV single-ended 200 mV single-ended 100 mV differential each side
- Analog bandwidth 1
- With TLA7Bxx module
- 3 GHz through iCapture™ to analog out BNCs
- With TLA7ACx module
- 2 GHz through iCapture™ to analog out BNCs
1Analog bandwidth of the P6960 probe is less with the flying lead set attached.
- Operating range
- -2 V to +5 V
- Maximum nondestructive voltage
- ±15 V
- Cable length
- 1.8 m (6 ft.)
|P6860||34-channel High-density Compression Probe, with Differential Clock, Single-ended Data, and Accessories|
|P6910||34-channel General-purpose Probe with Differential Clock, Differential Data, and Accessories|
|P6960|| 34-channel Single-ended High-density Compression Probe with D-Max® Probing Technology, with Differential Clock, Single-ended Data, and Accessories
Opt 01: 34-channel General-purpose Flying Lead Set (196-3494-xx)
|P6962||34-channel (optimized for half-channel mode) Single-ended High-density Compression Probe with D-Max® Probing Technology with Differential Clock, Single-ended Data, and Accessories|
|P6964||34-channel (optimized for quarter-channel mode) Single-ended High-density Compression Probe with D-Max® Probing Technology with Differential Clock, Single-ended Data, and Accessories|
|P6980||34-channel Differential High-density Compression Probe with D-Max® Probing Technology, with Differential Clock, Differential Data, and Accessories|
|P6982||17-channel (optimized for half-channel mode) Differential High-density Compression Probe with D-Max® Probing Technology, with Differential Clock, Differential Data, and Accessories|
- P6910 probe options
- Option 1K
- Add 17-Chanel probing accessories
Part number Qty Description 196-3470-xx 2 8 ch leadset 196-3471-xx 1 1 ch leadset 020-3042-xx 1 Probe Grouper Kit (includes 2 8-channel probe groupers + square pin header) 020-2896-xx 2 Package of 10 black grabber tips
|006-8271-xx||1||Accessory box, plastic|
|001-1510-xx||1||Color illustration sheet Insert|
|020-3021-xx||1||Heat strip wire kit (15' or 4.57 m)|
|020-3031-xx||2||Hand browser kit|
|020-3032-xx||17||25/55 degree holder kit|
|020-3033-xx||17||Flex adapter kit|
|020-3034-xx||17||Ferrite bead kit|
|020-3035-xx||17||Standard adapter kit|
|020-3036-xx||17||Wide body adapter kit|
|020-3037-xx||34||Wire tubing kit|
|020-3042-xx||2||Probe grouper kit ((includes 2 8-channel probe groupers + square pin header)|
- Opt. L0
- English manual
- Opt. L99
- No manual
Customers who choose a Tektronix product receive a support partnership focused on making the deployment and operation of their products successful. Tektronix support teams are committed to providing rapid response. A broad range of flexible services is available at the time of product purchase to meet customer service needs.
The following service options are offered for the TLA logic analyzer probes.
|Option||P6800 series||P6900 series|
|Opt. CA1 Single calibration event or coverage for the designated calibration interval, whichever comes first||X||X|
|Opt. C3 Calibration Service, 3 Years||X||X|
|Opt. C5 Calibration Service, 5 Years||X||X|
|Opt. R3 Repair Service, 3 Years||X||X|
|Opt. R5 Repair Service, 5 Years||X||X|
|Opt. R1PW Repair Service Coverage, 1-year Post Warranty||X||X (Not P6982)|
|Opt. R2PW Repair Service Coverage, 2-years Post Warranty||X||X (Not P6982)|
|Opt. R3DW Repair Service Coverage, 3 Years (includes product warranty period). 3-year period starts at time of instrument purchase||X||X (Not P6982)|
|Opt. R5DW Repair Service Coverage, 5 Years (includes product warranty period). 5-year period starts at time of instrument purchase||X||X (Not P6982)|
P6800 standard accessories
|Qty per probe||Part number|
|Nut Bar (used on||2||220-0255-xx|
|Nut Bar (used on||1||020-2451-xx|
|Elastomer Holder Assembly, Thick (used on >0.093 in. thick PCB), bag of 2||1||020-2452-xx|
|Sheet of probe labels||1||335-0346-xx|
1Recommend PEM KFS-256 or equivalent for >0.093 in. thick PCB.
P6900 standard accessories
P6800 recommended accessories
- High-resistance Adapter (18 channels) for P6810
- Mictor-on-PCB to P6860 Probe Adapter
- Nut Bar for Thin Elastomer Holder Assembly (Bag of 2)
P6900 recommended accessories
- P6900 Series Probe mounting posts
- High performance accessory kit for the P6910