Tektronix Logic Analyzers
Features & Benefits
- 2/4 Channel Digitizing Oscilloscope Modules with 15 Kb Memory Depth
- Up to 1 GHz Bandwidth Provides High-fidelity Signal Quality Measurements of Digital Signals
- Up to 5 GS/s Sample Rate Provides High Resolution Analog Views of Digital Signals
- Advanced Digital Oscilloscope Triggering Helps Find Elusive Analog Anomalies in Digital Signals
- Digital Hardware Verification and Debug
- Monitor & Measure Digital Hardware Performance
Breakthrough Solutions for Real-time Digital Systems Analysis
The TLA700 Series offers a range of digitizing oscilloscope modules that provide the acquisition capabilities of the world's best digitizing oscilloscopes, tightly integrated with the TLA700 logic analyzers. The 2 and 4 channel digitizing oscilloscope modules available in the TLA700 Series offer sample rates of up to 5 GS/s and bandwidths of up to 1 GHz, with 15 Kb memory depth per channel at all times.
The digitizing oscilloscope modules offer precise time correlation and flexible cross-triggering with other installed modules. This enables you to see the quality of critical signals time-correlated with the digital signals represented by the logic analyzer modules.
These modules offer the triggering you expect from a Tektronix digital oscilloscope: Pulse Width, Runt, Glitch, Slew Rate, Logic Pattern, Setup-and-Hold Violation, Edge and Timeout.
Number of Channels per Module -
TLA7E2: 4 channels.
TLA7D1: 2 channels.
Sample Rate -
TLA7E2: 5 GS/s on all channels.
TLA7D1: 2.5 GS/s on all channels.
Bandwidth (at probe tips) -
100 mV to 10 V range: 1 GHz.
50 mV to 99.8 mV range: 900 MHz.
20 mV to 49.8 mV range: 600 MHz.
500 MHz on all channels in all ranges.
Memory Depth - 15,000 samples per channel in all modes.
Number of Mainframe Slots Required - 2.
Input Sensitivity Range - 10 mV to 100 V full scale.
Vertical Resolution - 8-Bit (256 levels).
DC Gain Accuracy - ±1.5% of full scale range.
Analog Bandwidth Selections - 20 MHz, 250 MHz, and Full.
Input Coupling - AC, DC or GND.
Input Impedance Selections - 1 MΩ in parallel with 10 pF, or 50 Ω.
AC Coupled Lower Frequency Limit - ≤10 Hz when AC 1 MΩ coupled, ≤200 kHz when AC 50 Ω coupled.
Maximum Input Voltage at Probe Connector - 300 VRMS, but no greater than ±420 Vp (1 MΩ or ground input coupling).
Probe Input Characteristics
Probe Input Interface - TEKPROBE™ probe interface.
Input Loading - Less than 1 pF in parallel with 1 MΩ with either P6243 or P6245.
Usable Input Voltage Range at Probe Tip - P6243 Probe: ±8 V. P6245 Probe: ±18 V.
Sample Rate Range - 200 ps to 200 ms in 1, 2.5, 5 sequence.
Timebase Accuracy - ±100 ppm over any interval ≥1 ms.
Record Length Range - 512 to 15,000 samples per channel in all modes.
Acquisition Modes - Single-shot, repetitive.
Trigger Modes - Normal, auto.
Trigger Position - Anywhere in the acquired record (pre-fill can be set anywhere from 0% to 100%).
Trigger Types - Edge, pulse width, timeout, glitch, runt, slew rate, logic pattern, setup-and-hold violation.
Trigger Actions - Trigger, trigger all, set signal, arm, immediate, wait for system trigger.
Edge Trigger - Conventional level driven trigger, positive or negative slope, on any channel or external trigger input. Coupling Selections: DC, AC, noise reject, HF reject, LF reject.
Glitch Trigger - Triggers on
(or rejects) glitches of positive, negative, or either polarity; settable
from 2 ns to 1 s. Minimum glitch width: 2.0 ns, with 200 ps resolution (2 ns
to 10 ns settings).
Logic Pattern Trigger - Triggers
when a logical combination (AND, OR) of all the input channels (Hi, Lo, Don't
Care) stays true or false for a specified period of time; settable from 2 ns
to 1 s.
Logic Pattern trigger.
Setup-and-hold Trigger - Triggers
on violations of both setup time and hold time between clock and data which
are on separate input channels; setup time settable from -100 ns to +100 ns
in 200 ps increments; hold time settable from -1 ns to +102 ns; minimum settable
window of setup time + hold time is 2 ns.
Safety - CSA C22.2 No. 1010.1, EN61010-1, IEC61010-1, UL 3111-1.
P6243 Probe Cable Length - 1.3 m (51 in.).
P6245 Probe Cable Length - 1.3 m (51 in.).