80SJNB, 80SJARB, SDLA Visualizer and Scope Noise Characterization Application Software Release - V4.5.9.0, V4.0.4.0, V2.2.0.4, V

80SJNB, 80SJARB, SDLA Visualizer, and Scope Noise Characterization software run on the DSA8300 instruments with Windows 7 Operating System. This release of 80SJNB adds updates to TDECQ measurements in support of 100 to 400 Gbps, PAM4 signal analysis, with focus on the TDECQ (Transmitter and Dispersion Eye Closure for PAM4) optical measurement.This release of 80SJNB also extends the Jitter, Noise, and BER analysis previously provided for NRZ and PAM4 signaling with additional optical measurements performed in accordance with IEEE standards, such as OMA - Optical Modulation Amplitude for each eye of the PAM4 stack, and the global OMA outer measurement. This release includes Extinction Ratio with a correction factor control to compensate for offsets and drifts and Average Optical Power measurements for PAM4 signals.Acquisition enhancements address the bandwidth enhancements to match the standard Bessel-Thomson transfer functions. A high throughput acquisition mode focuses on concurrent acquisitions on all optical available modules.This new version of 80SJNB also expands the modeling of the Receiver with added optimization methods for the decision thresholds and sampling phases in accordance to IEEE and OIF/CEI standards. 80SJNB link simulation Equalization was enhanced to support PAM4 signaling, with focus on the optimization of the TDECQ measurements.Lastly, manufacturing Pass/Fail test functionality for Mask testing has been extended to provide additional analysis capabilities when targets are not met.As before, the PAM4 option builds on the Advanced option, and supports comprehensive analysis on PAM4 signals.80SJNB Essential provides Jitter, Noise and BER analysis for NRZ signals. The Advanced option adds capabilities for de-embedding of text fixtures, channel emulation based on TDR/TDT and S-parameter models, and CTLE, FFE, DFE equalizer support.

This software applies to: DSA8300

By downloading, you agree to the terms and conditions of the Software Download Agreement.

For programs licensed under the “GNU General Public License (GPL) or Lesser GNU General Public License (LGPL)” the complete corresponding sources are available. You can order a complete machine-readable copy of the source code from us for a period of three (3) years after download or receipt of the software, by sending a written request to:

Chief Intellectual Property
Tektronix, Inc.
14150 SW Karl Braun Dr.
Beaverton, OR 97077

This offer is valid to anyone in receipt of this information.

Your request should include: the name of the product, (ii) your (company) name, and (iii) your return mailing and email address (if available).

Please note that we may charge you a fee to cover the cost of performing this distribution.


Download Manuals, Datasheets, Software and more:

Go to top