Keithley 2700 Multimeter/Data Acquisition/Switch Systems
Each Series 2700 system combines precision measurement, switching, and control in a tightly integrated enclosure for either rack-mount or bench-top applications. The Model 2750 offers extended low ohms measurement capability and supports up to 5 7700 Switch cards for a maximum 200, 2-pole multiplexed channels. It also contains a built-in 20mV clamp that helps protect sensitive devices from damage and prevents self-heating errors during dry circuit testing. Switch card options range from traditional multiplexer modules to automatic CJC compensation for temperature measurement and more.
The 2-slot model 2700 has been obsoleted.
See Keithley’s new DAQ6510 6½-Digit Data Acquisition and Logging Multimeter System.
|Five-slot mainframe for 7700 switch cards.||Makes it easy to create an automated test system with up to 200 channels/240 crosspoints.|
|Built-in algorithms for a variety of thermocouples, RTDs, and thermistors.||Makes temperature measurements as easy as hooking up a sensor because the system does the rest.|
|12 switch and control modules from which to choose||Simplifies selecting just the right module to meet your application needs|
|Open lead detection||Protects against false readings due to lead disconnections.|
|Battery-backed non-volatile memory||Protects valuable data and allows resuming scans where they stopped after a power failure.|
|Channel Monitor function||Allows viewing a channel of interest without interrupting a scan|
|Selectable power line cycle integration||Provides rejection of noise from line cycle interference, the most common source of noisy readings.|
|Data Sheet||Module||Description||Configure and Quote|
|View Datasheet||7700||20 CHANNEL MULTIPLEXER||Configure and Quote|
|View Datasheet||7701||32 CHANNEL DIFFERENTIAL MULTIPLEXER||Configure and Quote|
|View Datasheet||7702||40 CHANNEL DIFFERENTIAL MULTIPLEXER||Configure and Quote|
|View Datasheet||7703||32 CHANNEL HI SPEED DIFFERENTIAL MULTIPLEXER||Configure and Quote|
|View Datasheet||7705||40 CHANNEL CONTROL MODULE||Configure and Quote|
|View Datasheet||7706||ALL IN ONE I/O MODULE||Configure and Quote|
|View Datasheet||7707||MULTIPLEXER DIGITAL I/O MODULE||Configure and Quote|
|View Datasheet||7708||40 CHANNEL DIFFERENTIAL MULTIPLEXER MODULE||Configure and Quote|
|View Datasheet||7709||6 X 8 MATRIX MODULE||Configure and Quote|
|View Datasheet||7710||20 CHANNEL 60V SOLID STATE MULTIPLEXER CARD||Configure and Quote|
|View Datasheet||7711||2GHZ, DUAL 1X4, 50 OHM MULTIPLEXER CARD||Configure and Quote|
Control your instruments from your PC
Drive innovation through faster test & measurement with KickStart Software. KickStart instrument control software for the PC enables quick test setup, text execution and data visualization. By plotting data immediately and offering quick statistical summaries of the data in the reading table, KickStart allows you to gather insights faster and make the decisions you need to make.
- Run tests on multiple types of bench instruments independently or simultaneously
- Auto export data for long term logging
- Replicate tests quickly using saved test configurations
- Use built-in plotting, comparison and statistical tools to quickly discover measurement anomalies and trends
- Configure tests using simulated instruments and swap in real instruments when available