The P7313SMA probe provides a high fidelity, low noise, differential input connection for Tektronix real-time oscilloscopes. This probe also includes features that enable proper termination for high-speed serial buses.
Notice to EU customers
This product is not updated to comply with the RoHS 2 Directive 2011/65/EU and will not be shipped to the EU. Customers may be able to purchase products from inventory that were placed on the EU market prior to July 22, 2017 until supplies are depleted. Tektronix is committed to helping you with your solution needs. Please contact your local sales representative for further assistance or to determine if alternative product(s) are available. Tektronix will continue service to the end of worldwide support life.
Features & benefits
- >13.0 GHz bandwidth, 16 GHz with DSP filtering
- 50 Ω termination network, differential SMA inputs
- Industry-leading differential return loss and VSWR
- High-bandwidth differential amplifier with excellent CMRR
- Internal termination voltage generator can be controlled by the oscilloscope, by an external source, or automatically by the probe
- Phase-matched SMA cables (38 inch length, <1 ps skew) with cable loss compensation
- Switchable gain for extended dynamic range
- Auxiliary (inverted) output for use with spectrum analyzers, network analyzers, or as a clock recovery trigger source
- TekConnect™ Interface
- PCI Express
- Serial ATA
- MIPI M-PHY
Tektronix Differential SMA probes
Tektronix differential SMA probes are designed for measuring differential signals in a 50 Ω signaling environment, providing the ability to convert from a differential SMA signal path to a single oscilloscope input channel. Many of today's high-speed serial data standards employ differential signaling on multiple lanes that are challenging to measure simultaneously on a single oscilloscope. The Tektronix Differential P7300 SMA Probes provide the ability to measure a high-speed differential signal on each channel of a multiple-channel oscilloscope. The right oscilloscope can simultaneously acquire up to four high-speed differential signals with the use of four differential SMA probes. As an added benefit, the SMA inputs on the probes connect to high-quality 50 Ω terminations that offer industry-leading return loss, a critical specification that is very important in compliance testing as frequencies increase.
Tektronix Differential P7300 SMA Probes also provide a common mode DC voltage input to the termination network. The termination voltage can be supplied either externally by the user or internally by the oscilloscope. In addition, there is also an automatic mode that senses the common mode voltage of the input signal and automatically sets the termination voltage to match. The P7313SMA has an extended termination voltage range that makes it ideal for testing differential standards with high common mode voltages such as HDMI.
Taken together, the high-speed differential amplifier, superior 50 Ω terminations, low return loss, flexible termination voltage, and quality phase-matched SMA cables create a world-class differential acquisition system when used with Tektronix oscilloscopes.
All specifications are guaranteed unless noted otherwise.
- Bandwidth, typical
- >13.0 GHz (16 GHz with DSP filtering)
- Rise time
- 10 to 90%
- <40 ps
- 10 to 80%, typical
- <25 ps
- 2.5X or 12.5X, user selectable
- Differential input range
- Common Mode input range
- +3.6/-2.5 V
- Termination voltage range
- +3.6/-2.5 V
- Noise, referred to input
<13 nV/√Hz (2.5X)
<40 nV/√Hz (12.5X)
- Differential return loss
<30 dB to 500 MHz (VSWR<1.065:1)
<20 dB to 6.5 GHz (VSWR<1.22:1)
<15 dB to 10 GHz (VSWR<1.43:1)
<12 dB to 13 GHz (VSWR<1.67:1)
>50 dB to 1 GHz
>35 dB to 2.5 GHz
>25 dB to 5 GHz
>20 dB to 10 GHz
>15 dB to 13 GHz
- Maximum voltage (non destructive)
- ±5 V (DC + peak AC)