RF Spectrum Analyzer Software

• Automated and easy to Set-Up Wizard
• Push button support for FCC, MIL-STD, DEF-STAN and CISPR regulations
• Automated multiple measurement/multiple format reporting
• Ambient noise calibration and comparison
• Harmonic markers and faster scans using peak detector and spot measurements with quasi-peak and average detector failures

SVP: Advanced Signal Analysis (including pulse measurements)

• Automatically characterize pulses with up to 27 different vector and scalar measurements
• Pulse table presents results of all measurements
• Statistical measurements like Histograms to display pulse measurements over many pulses
• Individual pulse traces available for all of the measurements
• Save results for further analysis

5GNR: 5G New Radio 5GNR Uplink/Downlink measurements

• Simplify physical-layer RF conformance to the 3GPP 5G New Radio (NR) standard
• Perform output power level and dynamics tests with CHP, ACP, PVT displays
• Validate transmit signal quality with EVM, Frequency Error, EVM vs. Symbol displays
• Identify unwanted in-band and out-of-band emissions with ACP, SEM and OBW displays
• Simultaneously view multiple measurements and results for each component carrier with coupled markers across measurements and domains.
• Gain complete insight into your system when combined with 6 Series B MSO Oscilloscopes equipped with Live Connection (CON license) and RF vs Time option (SV-RFVT)

SVA: AM/FM/PM/Direct Audio Analysis

• Audio measurements for AM/FM/PM signals
• SINAD, Total Harmonic Distortion, Noise, Hum
• High pass filters, low pass filters, deemphasize filters both preset and user settable. 

SVT: Settling Time (Frequency and Phase) Measurement

• Measure time for signal to settle to within a frequency or phase range
• Frequency and settling time for devices like Phase Locked Loops
• User definable mask and definition of settling times from external trigger or internal trigger on analyzer

SVM: General Purpose Modulation Analysis

• Includes Error Vector Magnitude, Modulation Error Rate, Constellation Diagrams, and more measurements
• Support for 27 different modulation schemes, including 256 QAM, CPM, nFSK, and others
• Sync word search to lock on constellations, Burst Mode to detect and analyze modulation quality on bursted signals
• Useful for measuring modulation quality of Zigbee, Bluetooth EDR, TETRA, and DVB-S devices

SVO: Custom OFDM Analysis

• Allows OFDM analysis for signals that are close in format to 802.11a or 802.16.d (fixed WiMAX) signals

CON: SignalVu-PC live link to the 5/6 Series MSO or MDO4000B/C Series

• Control and connect to the 5/6 Series MSO (with opt. SV-RFVT) or MDO4000B/C with SA option.
  Note: SignalVu-PC can either run on the 5/6 Series MSO (with optional Windows 10 SSD; 5/6-WIN) or on separate Windows PC.

SV23: WLAN 802.11a/b/g/j/p measurement application

• Physical layer RF transmitter measurements as defined in the IEEE standards for 802.11a/b/g/j/p Wireless LAN
• Summary display with key measurements reported

SV24: WLAN 802.11n measurement application (requires application SV23)

• Physical layer RF transmitter measurements as defined in the IEEE standards for SISO 802.11n Wireless LAN
• Summary display with key measurements reported

SV25: WLAN 802.11ac measurement application (requires application SV24)

• Physical layer RF transmitter measurements as defined in the IEEE standards for SISO 802.11ac Wireless LAN for up to 20, 40, 80, and 160 MHz measurements
• Summary display with key measurements reported

SV2C: Bundle of Live Link to MDO4000B/C and WLAN 802.11a/b/g/j/p/n/ac measurements (includes applications CON, SV23, SV24 and SV25)

See Applications SV23, SV24, SV25

MAP: Mapping

• Integrates measurements from SignalVu-PC to place on map, can be used outdoors with Global Satellite Navigation receiver or indoors
• Integrates with GPS and other Global Satellite Navigation receivers
• Plot measurements repetitively based on time or distance travelled

SV26: APCO P25 measurement application

• Phase 1 and Phase 2 APCO P25 measurements
• Easy to capture and analyze signals to quickly determine signal quality and timing
• Summary display shows key results

SV27: Bluetooth Basic LE TX SIG measurements

• Physical layer RF measurements for Bluetooth Basic and Bluetooth Low Energy, per the Bluetooth SIG specifications
• Demodulation and symbol information with simple presets for different test setups
• Automatic measurements for Bluetooth Low Energy and Basic Rate
• Detection for Bluetooth Enhanced Data Rate packets 

SV28: LTE downlink (eNB) RF measurements

• RF measurements (ACLR, SEM, Channel Power, OBW) per 3GPP TS version 12.5, in addition to Cell ID detection
• Support for both TDD and FDD frame format is included 
• Presets and pass/fail information accelerate validation 

SV56: Playback of recorded files

• Enables playback of R3F files using SignalVu-PC
• Change analysis parameters like RBW, span
• Make all measurements including DPX and AM/FM listening

SV54: Signal survey and classification

• Define signals by frequency, bandwidth and shape
• User-created database enables custom surveys of your region
• Quickly determine new and unauthorized signals of interest

SV60: Cable and Antenna Test

When equipped with the option 04 tracking generator, the RSA500A/600A series makes one-port measurements on cables, devices and antennas and removes the need for expensive external reference source. Measurements include:

• Distance to Fault
• Return Loss
• Voltage Standing Wave Ratio (VSWR)

B800: For RSA7100B: Acquisition Bandwidth of 800 MHz

STREAM: For RSA7100B: Streaming data (required for RAID storage)

SV25H: For RSA7100B: WLAN 802.11ac measurement application

SVMH: For RSA7100B: General Purpose Modulation Analysis to work with analyzer of acquisition bandwidth less than or equal to 1 GHz

SVPH: For RSA7100B: Pulse Analysis to work with analyzer of acquisition bandwidth less than or equal to 1 GHz

TRIG: For RSA7100B: Advanced triggers to work with analyzer of acquisition bandwidth less than or equal to 1 GHz

SV31: Bluetooth 5 measurements (requires application SV27)

• Physical layer RF measurements for Bluetooth 5 variants per the Bluetooth SIG specifications
• Signal Quality Measurement such as Frequency deviation, offset and drift
• System Level Debug with Packet Header Field Decoding

SVQP: CISPR Detectors

• EMI/EMC Emission (Radiated/Conducted) pre-compliance and debug
• Peak, Quasi-Peak, Average Detection per CISPR16
• Available on Spectrum ( for debug) and Spurious (for pre-compliance)

PHASxx-SVPC: For RSA7100B: Phase Noise / Jitter Measurements

• Automated phase noise or jitter measurements
• Quick check of phase-locked signals
• 10 Hz to 1 GHz frequency offset range