質問：
I am trying to get my TG700 to be controlled from the LAN. Appendix C of your user manual suggests checking remote command operation by connecting to the unit with telnet. When I do that+ I am challenged for a VxWorks login and password. What is the default username/password to telnet to the TG700?
回答：
A request for password indicates you have not set the port in the Telnet session. Set the port to 5000. When this is done, there is no password required.
FAQの該当製品：
製品シリーズなし
製品：
FAQ ID 60806
すべてのFAQを表示 »