問題:
I am trying to get my TG700 to be controlled from the LAN. Appendix C of your user manual suggests checking remote command operation by connecting to the unit with telnet. When I do that+ I am challenged for a VxWorks login and password. What is the default username/password to telnet to the TG700?
答案:
A request for password indicates you have not set the port in the Telnet session. Set the port to 5000. When this is done, there is no password required.
此常見問答集適用於:
沒有任何產品系列
產品:
常見問答集 ID 60806
檢視所有常見問答集 »