I am trying to get my TG700 to be controlled from the LAN. Appendix C of your user manual suggests checking remote command operation by connecting to the unit with telnet. When I do that+ I am challenged for a VxWorks login and password. What is the default username/password to telnet to the TG700?
A request for password indicates you have not set the port in the Telnet session. Set the port to 5000. When this is done, there is no password required.
이 FAQ는 다음에 적용 됩니다:
제품 시리즈 없음
FAQ ID 60806모든 FAQ 보기 »