RF Design and Development
Simple Tools Provide Clear Insight into Complex RF Problems
Tektronix provides RF Physical layer (PHY) testing solutions to help you get the job done and get your design to market faster.
Discover how Real-Time Spectrum Analysis works and how it can be used to solve many RF capture and measurement problems with our primer. Explore our library of technical documents and posters below to learn what solutions can help you validate, debug and pass performance or compliance tests the first time.
Eguide to RF Signals
Navigate the RF spectrum and gain insight into the signals around you. This piece contains detailed examples with brief movies of RF signals, their measurements, audio recording of demodulated FM, and much more.
Testing Modern Radios
Radio Communications: Challenges and solutions for designing Software Defined Radios that employ frequency hopping techniques.
Now, you no longer need to spend precious time on the job searching for information on Basic Rate, Low Energy, and Enhanced Data Rate Physical Layer characteristics. This poster puts it all in one convenient place, so you can get back to what’s really important in your job!
AWG5200 Arbitrary Waveform Generator
|Cable and Antenna Measurements Using Tektronix USB Spectrum Analyzers|
Discover the basics of line sweeping measurements on cable and antenna systems
|Spurious Emission Measurement on 5G NR Base Station Transmitters and Receivers|
This application note discusses how to use Tektronix real time spectrum analyzers to perform spurious tests on 5G NR base stations.
|Automotive EMI/EMC Pre-compliance Tests|
This application note provides an overview of measurement regulations and EMI pre-compliance procedures. Test setups for both radiated and conducted emissions are shown using the Tektronix RSA306B with EMCVu software.
|Tire Pressure Monitoring Systems and Remote/Passive Keyless Entry|
This application note will discuss the test solution of typical RF automotive applications: tire pressure monitoring system, remote keyless entry, passive keyless entry, and remote start.
|Low Cost RF Sensors|
This application note discusses Tektronix USB Real-Time Spectrum Analyzers as low cost instrument hardware options that are well suited for applications that need automatic measurements or remote control.
|Conquering Radar Signal Generation|
Let us help you decode radar signal generation with our informative webinar.
|6 Things to Consider when Choosing your Wireless RF Module|
Learn about the factors you should take into account when choosing the right wirelss RF module for your design.