ダウンロード

マニュアル、データシート、ソフトウェアなどのダウンロード:

ダウンロード・タイプ
型名またはキーワード

フィードバック

AWGSYNC01

Declassification and Security

This document helps customers with data security concerns to sanitize or remove memory devices from the AWGSYNC01.


該当製品:

AWGSYNC01

  • マニュアルの種類: 機密解除
  • 部品番号: 077102600
  • リリースの日付:

ダウンロードすることにより、マニュアル・ダウンロードに関する利用条件の諸条件に同意したことになります。

マニュアルのダウンロードに関する利用条件

注意:このWebサイトからドキュメントをダウンロードする前に、次の契約条項をよくお読みください。 テクトロニクスのWebサイトからマニュアルをダウンロードすることによって、次の契約条項に同意したことになります。

現在サポートされている製品のマニュアル:

当社機器の所有者は、社内使用または個人使用の目的で、このWebサイトのマニュアルをダウンロードし複製することができます。 現在サポートされている製品のマニュアルは、Tektronix, Incの書面による明示的な承認がない限り、他者への配布のために複製することはできません。

テクトロニクスのマニュアルは、製品のライフサイクル中に製品に適用された変更を反映するために改訂されていることがあります。 そのため、特定の製品に複数の版のマニュアルが存在していることがあります。 特定の製品のシリアル番号に該当するマニュアルの版を取得してください。

サポート終了製品のマニュアル:

テクトロニクスでは、長期サポートの適用外の計測製品のマニュアルは提供できません。 テクトロニクスは、(a)当社部品番号を標記し、(b)当社がサポートしない測定製品に限り、ユーザ・マニュアル、オペレータ・マニュアル、サービス・マニュアルなどを含む当社測定製品マニュアルのコピーを複製し配布する許可とライセンスを他者に付与します。

テクトロニクスのマニュアルは、製品のライフサイクル中に製品に適用された変更を反映するために改訂されていることがあります。 そのため、特定の製品に複数の版のマニュアルが存在していることがあります。 特定の製品のシリアル番号に該当するマニュアルの版を取得してください。

この権利とライセンスは、現在当社から入手可能なマニュアルや出版物、または映像制作製品やカラー・プリンタ製品のマニュアルや出版物には適用されません。

免責事項:

テクトロニクスは、当社が提供したものでないか、または上記の権利およびライセンスに従って製作または配布された、いかなる計測製品マニュアルや出版物に含まれる情報、テキスト、グラフィック、概略図、部品リスト、またはその他の素材の正確性や完全性について保証しません。

テクトロニクスは、このWebサイトのコンテンツまたはその製品をいつでも通知なく変更することがあります。

責任の制限:

テクトロニクスは、上記の権利とライセンスに従って製作または配布されたいかなる計測製品マニュアルや出版物の使用から生じた、いかなる損害(結果損害または偶発的損害、利益の損失、事業の中断、または知的所有権の侵害による損害を含むがこれらに限らない)に対して責任を負わないものとします。

 

Read Online

Preface

This document helps customers with data security concerns to sanitize or remove memory devices from the Tektronix AWGSYNC01 HUB.

These products have data storage (memory) devices and data output devices. These instructions tell how to clear or sanitize the memory devices and disable the data output devices. The instructions also tell how to declassify an instrument that is not functioning.

Reference

The procedures in this document are written to meet the requirements specified in:

  • NISPOM, DoD 5220.22–M, Chapter 8
  • ISFO Process Manual for Certification & Accreditation of Classified Systems under NISPOM

Products

The following Tektronix products are covered by this document:

  • AWGSYNC01

Terms used in this document

The following terms may be used in this document:
  • Clear. This removes data on media/memory before reusing it in a secured area. All reusable memory is cleared to deny access to previously stored information by standard means of access.
  • Erase. This is equivalent to clear.
  • Instrument Declassification. A term that refers to procedures that must be undertaken before an instrument can be removed from a secure environment. Declassification procedures include memory sanitization and memory removal, and sometimes both.
  • Media storage/data export device. Any of several devices that can be used to store or export data from the instrument, such as a USB port.
  • Nonvolatile memory. Data is retained when the instrument is powered off.
  • Remove. This is a physical means to clear the data by removing the memory device from the instrument. Instructions are available in the product Service Manual.
  • Sanitize. This eradicates the data from media/memory so that the data cannot be recovered by other means or technology. This is typically used when the device will be moved (temporarily or permanently) from a secured area to a non-secured area.
  • Scrub.This is equivalent to sanitize.
  • User Accessible. User is able to directly retrieve the memory device contents.
  • User-modifiable. User can write to the memory device during normal instrument operation, using the instrument interface or remote control.
  • Volatile memory. Data is lost when the instrument is powered off.

Device terms

The following terms are used with the memory devices in this document:
  • User data. Describes the type of information stored in the device. Refers to waveforms or other measurement data representing signals connected to the instrument by users.
  • User settings. Describes the type of information stored in the device. Refers to instrument settings that can be changed by the user.
  • Both. Describes the type of information stored in the device. It means that both user data and user settings are stored in the device.
  • None. Describes the type of information stored in the device. It means that neither user data nor user settings are stored in the device.
  • Directly. Describes how data is modified. It means that the user can modify the data.
  • Indirectly. Describes how data is modified. It means that the instrument system resources modify the data and that the user cannot modify the data.

Memory devices

The following information pertains to the nonvolatile memory device in the instrument. This product does not contain any volatile memory or data export devices. Detailed procedures to clear or sanitize this device, if any, are shown following the list.

512 MB flash

  • Type and size: Flash 512 Mbits
  • Function: Holds instrument calibration data, serial number, and FPGA image.
  • Type of user information stored: None
  • Method of modification: Indirect
  • Data input method: Firmware operations
  • Location: Trigger board
  • User accessible: No

Data export devices

There are no media or export devices that require declassification or security procedures with this product.

Volatile memory devices

There are no volatile memory devices that require declassification or security procedures with this product.

To clear

Not applicable. This device does not contain user data or settings. Clearing would disable instrument functionality.

Process to sanitize

Not applicable. This device does not contain user data or settings. Sanitizing would disable instrument functionality.

Clear or sanitize a non-functional instrument

There are no procedures to clear or sanitize a non-functioning instrument. Please return your instrument to Tektronix repair.

Charges

Replacement of any missing hardware will be charged according to the rate at the time of replacement.