質問：
My NetTek won't measure 1xEVDO power in the calibration mode on my Lucent Base Station.
回答：
The Lucent 1xEVDO BTS outputs CDMA2000 signals when in the power calibration mode.
Change the settings in the YBT250 NetTek to the CDMA2000 channel plan, then select RF Power measurement, and select from the pull-down box on screen whether this is a single carrier or multi-carrier output. Then take your power reading.
FAQの該当製品：
製品シリーズなし
製品：
FAQ ID 55941
すべてのFAQを表示 »