Current Language
×
Japanese (Japan)

言語の選択:

トグル・メニュー
Current Language
×
Japanese (Japan)

言語の選択:

ダウンロード

マニュアル、データシート、ソフトウェアなどのダウンロード:

ダウンロード・タイプ
型名またはキーワード

Tektronix MSO/DPO4000 Series vs. LeCroy WaveSurfer XS Fact Sheet


Serial Triggering and Decode
Tektronix MSO/DPO3000 Series
✔ Simple time-correlated and labeled bus form display with color coded decode
✔ Wave Inspector® controls quickly navigate through long records to find events of interest.
✔ Large easy to read tabular view with timestamp.
✔ Highlighting a packet centers the YT display on that packet.
✔ Serial search completely integrated into Wave Inspector search.
Serial Triggering and Decode
LeCroy WaveSurfer Xs-A Series
Overlaid color coding obscures waveforms, is difficult to read, and waveforms are not automatically labeled.
Zoom uses multiple zoom windows with multiplexed front panel controls. Very difficult to view two decoded buses in same graticule.
Table of packets in lower half of display only.
✔ Highlighting a packet centers the YT display on that packet.
Serial search is completely separate from WaveScan search.
Serial Triggering and Decode
User Interface Designed For Easy Spectrum Analysis
Navigation and Search
Tektronix MSO/DPO3000 Series
✔ Dedicated pan/zoom Wave Inspector front panel controls quickly navigate through long records.
✔ Search on analog and digital channels.
✔ Search events found counter.
✔ Automated search marks.
Navigation and Search
LeCroy WaveSurfer Xs-A Series
Time intensive horizontal position used to scroll through data.
No search on digital channels.
No search events found counter.
No marks (user or automated).
✔ WaveScan search on measurement parameters.
Navigation and Search
Discovering an Intermittent Pulse
Tektronix MSO/DPO3000 Series
✔ >50,000 wfms/s maximum waveform capture rate.
✔ Persistence available in any capture mode.
Discovering an Intermittent Pulse
Many glitches and intermittent pulses are captured in 10 seconds.
LeCroy WaveSurfer Xs-A Series
Waveform capture rate not specified for normal acquisition or for WaveStream high speed capture mode
Persistence not available in WaveStream high speed capture mode.
WaveStream high speed capture mode not supported when digital channels are on.
Discovering an Intermittent Pulse
No glitches or intermittent pulses are captured in 1 minute.
Serial Search
Tektronix MSO/DPO3000 Series
✔ Wave Inspector seamlessly integrates serial buses into automated search.
✔ Automatically places marks at each occurrence of the search event.
✔ Reports the total number of events found and automatically marks each occurrence.
Serial Search
LeCroy WaveSurfer Xs-A Series
Serial search is completely separate from WaveScan
No search marks.
No total number of events found.
Serial Search
Digital Debug with MSO
Tektronix MSO/DPO3000 Series
✔ Fully integrated digital channels with single probe connection on front.
✔ Digital channels can be grouped and independently moved in the display
✔ Green trace for highs (1), blue trace for lows (0).
✔ Digital signals fully integrated into Wave Inspector search and navigation.
Digital Debug with MSO
LeCroy WaveSurfer Xs-A Series
Large external brick that requires multiple connections to the scope.
There is no visible difference between a low and a high.
Groups of signals can be shown individually or as a bus, but not both.
Cannot arrange ordering of bits in display. Hardware order only.
No search on digital channels or parallel buses
Digital Debug with MSO