Current Language
×
English

Select a language:

Download

Download Manuals, Datasheets, Software and more:

DOWNLOAD TYPE
MODEL or KEYWORD

Feedback

Tektronix MSO/DPO4000 Series vs. LeCroy WaveSurfer XS Fact Sheet


Serial Triggering and Decode
Tektronix MSO/DPO3000 Series
✔ Simple time-correlated and labeled bus form display with color coded decode
✔ Wave Inspector® controls quickly navigate through long records to find events of interest.
✔ Large easy to read tabular view with timestamp.
✔ Highlighting a packet centers the YT display on that packet.
✔ Serial search completely integrated into Wave Inspector search.
Serial Triggering and Decode
LeCroy WaveSurfer Xs-A Series
✗ Overlaid color coding obscures waveforms, is difficult to read, and waveforms are not automatically labeled.
✗ Zoom uses multiple zoom windows with multiplexed front panel controls. Very difficult to view two decoded buses in same graticule.
✗ Table of packets in lower half of display only.
✔ Highlighting a packet centers the YT display on that packet.
✗ Serial search is completely separate from WaveScan search.
Serial Triggering and Decode
User Interface Designed For Easy Spectrum Analysis
Navigation and Search
Tektronix MSO/DPO3000 Series
✔ Dedicated pan/zoom Wave Inspector front panel controls quickly navigate through long records.
✔ Search on analog and digital channels.
✔ Search events found counter.
✔ Automated search marks.
Navigation and Search
LeCroy WaveSurfer Xs-A Series
✗ Time intensive horizontal position used to scroll through data.
✗ No search on digital channels.
✗ No search events found counter.
✗ No marks (user or automated).
✔ WaveScan search on measurement parameters.
Navigation and Search
Discovering an Intermittent Pulse
Tektronix MSO/DPO3000 Series
✔ >50,000 wfms/s maximum waveform capture rate.
✔ Persistence available in any capture mode.
Discovering an Intermittent Pulse
Many glitches and intermittent pulses are captured in 10 seconds.
LeCroy WaveSurfer Xs-A Series
✗ Waveform capture rate not specified for normal acquisition or for WaveStream ™ high speed capture mode
✗ Persistence not available in WaveStream ™ high speed capture mode.
✗ WaveStream™ high speed capture mode not supported when digital channels are on.
Discovering an Intermittent Pulse
No glitches or intermittent pulses are captured in 1 minute.
Serial Search
Tektronix MSO/DPO3000 Series
✔ Wave Inspector seamlessly integrates serial buses into automated search.
✔ Automatically places marks at each occurrence of the search event.
✔ Reports the total number of events found and automatically marks each occurrence.
Serial Search
LeCroy WaveSurfer Xs-A Series
✗ Serial search is completely separate from WaveScan
✗ No search marks.
✗ No total number of events found.
Serial Search
Digital Debug with MSO
Tektronix MSO/DPO3000 Series
✔ Fully integrated digital channels with single probe connection on front.
✔ Digital channels can be grouped and independently moved in the display
✔ Green trace for highs (1), blue trace for lows (0).
✔ Digital signals fully integrated into Wave Inspector search and navigation.
Digital Debug with MSO
LeCroy WaveSurfer Xs-A Series
✗ Large external brick that requires multiple connections to the scope.
✗ There is no visible difference between a low and a high.
✗ Groups of signals can be shown individually or as a bus, but not both.
✗ Cannot arrange ordering of bits in display. Hardware order only.
✗ No search on digital channels or parallel buses
Digital Debug with MSO