MSO / DPO5000B Series

MSO / DPO5000B Series

MSO/DPO5000B Series oscilloscopes, designed for engineers debugging and verifying complex systems, provide exceptional signal fidelity, and advanced analysis and math capabilities, for your bench or for your lab. MSO models include 16 digital timing channels and all models can be equipped to decode common serial protocols—providing a comprehensive view of your systems. Plus, you can run Windows®-based analysis software right on the scope.

Bandwidth

Up to 2 GHz

Record length

Up to 250 Mpoints

Digital Channels

16
MSO Standard
DPO Optional

Analog Channels

4

Advanced signal measurement and analysis

MSO5000_DPOJET.jpg

Standard analysis tools include 53 automated measurements, measurement statistics, histograms, limit testing, advanced waveform math, user-definable filters and support for custom MATLAB and .NET math plug-ins. Optional applications such as advanced jitter and eye analysis, and wideband RF analysis, extend your capabilities, while Visual Trigger enables graphical trigger definition.

Highlights

  • Characterize signal parameters with a broad suite of standard measurement tools
  • Advanced jitter and timing analysis characterizes signal integrity issues and their sources
  • SignalVu software provides wideband spectral analysis and measurements, with options for audio, modulation, RF pulses and settling time
  • TekScope AnywhereTM software enables off-line measurements and analysis

Serial analysis and compliance testing, done right

DPO7000C_CAN_Bus_Event_Table.jpg

Simplify advanced system design debug and verification with protocol decode and serial trigger options for low- and mid-speed buses. Ensure interoperability of mid-speed serial buses with automated compliance testing.

Highlights

  • Protocol decode with serial triggering and analysis options available for I2C, SPI, RS-232/422/485/UART, USB 2.0, Ethernet, MIL-STD-1553B, CAN, LIN, and FlexRay
  • Automated compliance testing packages available for USB 2.0, Ethernet, HSIC, MOST, and BroadR-Reach

Automated power measurements

Tek-mso5204_18a_h-HR.jpg

Today’s efficient power converters demand less input power per watt of output, but they also demand more in terms of power supply measurements. Automated power measurements ensure simple, repeatable results for verifying and optimizing power circuit performance.

Highlights

  • MOSFET switching loss and safe operating area analysis
  • Power factor and harmonics measurements for IEC61000-3-2 pre-compliance
  • In-circuit inductor and transformer loss measurements
  • USB power adapter compliance testing to USB2.0 Battery Charger Specification v1.1 and IEC 62684

The industry’s best probes. Standard.

Tek-tpp1000_01a_h.jpg

Probes should not be overlooked as a key element in the measurement signal path. When you buy an MSO/DPO5000B Series oscilloscope, you get the industry’s best passive probes free. Featuring industry-best loading of 3.9 pF and bandwidth up to 1 GHz, the TPP-series probes will be your go-to probes for everyday use.

Highlights

  • TPP-series probes included standard, one per analog channel
  • Industry-best capacitive probe loading of 3.9 pF
  • 500 MHz or 1 GHz probe bandwidth

 

Models

Model Analog Bandwidth Sample Rate Record Length Analog Channels Digital Channels List Price
DPO5034B 350 MHz 5 GS/s 25M points - 125M points 4 - US $12,800
Configure & Quote
DPO5054B 500 MHz 5 GS/s 25M points - 125M points 4 - US $15,900
Configure & Quote
MSO5034B 350 MHz 5 GS/s 25M points - 125M points 4 16 US $16,200
Configure & Quote
MSO5054B 500 MHz 5 GS/s 25M points - 125M points 4 16 US $19,300
Configure & Quote
DPO5104B 1 GHz 5 GS/s - 10 GS/s 25M points - 125M points 4 - US $19,600
Configure & Quote
DPO5204B 2 GHz 5 GS/s - 10 GS/s 25M points - 125M points 4 - US $22,400
Configure & Quote
MSO5104B 1 GHz 5 GS/s - 10 GS/s 25M points - 125M points 4 16 US $23,000
Configure & Quote
MSO5204B 2 GHz 5 GS/s - 10 GS/s 25M points - 125M points 4 16 US $25,800
Configure & Quote
ModelDPO5034B
List PriceUS $12,800
Analog BandwidthSample RateRecord Length
350 MHz5 GS/s25M points - 125M points
Analog Channels
4
ModelDPO5054B
List PriceUS $15,900
Analog BandwidthSample RateRecord Length
500 MHz5 GS/s25M points - 125M points
Analog Channels
4
ModelMSO5034B
List PriceUS $16,200
Analog BandwidthSample RateRecord Length
350 MHz5 GS/s25M points - 125M points
Analog ChannelsDigital Channels
416
ModelMSO5054B
List PriceUS $19,300
Analog BandwidthSample RateRecord Length
500 MHz5 GS/s25M points - 125M points
Analog ChannelsDigital Channels
416
ModelDPO5104B
List PriceUS $19,600
Analog BandwidthSample RateRecord Length
1 GHz5 GS/s - 10 GS/s25M points - 125M points
Analog Channels
4
ModelDPO5204B
List PriceUS $22,400
Analog BandwidthSample RateRecord Length
2 GHz5 GS/s - 10 GS/s25M points - 125M points
Analog Channels
4
ModelMSO5104B
List PriceUS $23,000
Analog BandwidthSample RateRecord Length
1 GHz5 GS/s - 10 GS/s25M points - 125M points
Analog ChannelsDigital Channels
416
ModelMSO5204B
List PriceUS $25,800
Analog BandwidthSample RateRecord Length
2 GHz5 GS/s - 10 GS/s25M points - 125M points
Analog ChannelsDigital Channels
416
Model Analog Bandwidth Sample Rate Record Length Analog Channels Digital Channels List Price
DPO5034B 350 MHz 5 GS/s 25M points - 125M points 4 - US $12,800
Configure & Quote
DPO5054B 500 MHz 5 GS/s 25M points - 125M points 4 - US $15,900
Configure & Quote
MSO5034B 350 MHz 5 GS/s 25M points - 125M points 4 16 US $16,200
Configure & Quote
MSO5054B 500 MHz 5 GS/s 25M points - 125M points 4 16 US $19,300
Configure & Quote
DPO5104B 1 GHz 5 GS/s - 10 GS/s 25M points - 125M points 4 - US $19,600
Configure & Quote
DPO5204B 2 GHz 5 GS/s - 10 GS/s 25M points - 125M points 4 - US $22,400
Configure & Quote
MSO5104B 1 GHz 5 GS/s - 10 GS/s 25M points - 125M points 4 16 US $23,000
Configure & Quote
MSO5204B 2 GHz 5 GS/s - 10 GS/s 25M points - 125M points 4 16 US $25,800
Configure & Quote
ModelDPO5034B
List PriceUS $12,800
Analog BandwidthSample RateRecord Length
350 MHz5 GS/s25M points - 125M points
Analog Channels
4
ModelDPO5054B
List PriceUS $15,900
Analog BandwidthSample RateRecord Length
500 MHz5 GS/s25M points - 125M points
Analog Channels
4
ModelMSO5034B
List PriceUS $16,200
Analog BandwidthSample RateRecord Length
350 MHz5 GS/s25M points - 125M points
Analog ChannelsDigital Channels
416
ModelMSO5054B
List PriceUS $19,300
Analog BandwidthSample RateRecord Length
500 MHz5 GS/s25M points - 125M points
Analog ChannelsDigital Channels
416
ModelDPO5104B
List PriceUS $19,600
Analog BandwidthSample RateRecord Length
1 GHz5 GS/s - 10 GS/s25M points - 125M points
Analog Channels
4
ModelDPO5204B
List PriceUS $22,400
Analog BandwidthSample RateRecord Length
2 GHz5 GS/s - 10 GS/s25M points - 125M points
Analog Channels
4
ModelMSO5104B
List PriceUS $23,000
Analog BandwidthSample RateRecord Length
1 GHz5 GS/s - 10 GS/s25M points - 125M points
Analog ChannelsDigital Channels
416
ModelMSO5204B
List PriceUS $25,800
Analog BandwidthSample RateRecord Length
2 GHz5 GS/s - 10 GS/s25M points - 125M points
Analog ChannelsDigital Channels
416
  Tektronix
MSO/DPO5000B
Keysight
S Series
LeCroy
HDO6000
R&S
RTO Series
Bandwidth 350 MHz to 2 GHz 500 MHz to 8 GHz 350 MHz to 1 GHz 600 MHz to 4 GHz
Upgradeable Bandwidth No Yes No Yes
Analog Channels 4 4 4 2 or 4
Analog Sample Rate (All Channels) Up to 5 GS/s Up to 10 GS/s Up to 2.5 GS/s Up to 10 GS/s
Standard Record Length (All Channels) 25 M 50 M 50 M 50 M
Digital Channels (MSO) 16 (opt) 16 (opt) 16 (opt) 16 (opt)
Operating System Open Windows Open Windows Open Windows Open Windows
Standard Probes Up to 1 GHz Passive 500 MHz Passive 500 MHz Passive 500 MHz Passive
Standard Warranty 1 year 3 years 3 years 3 years

Automated power measurements

DPO7000C_CAN_Bus_Event_Table.jpg

Automated measurements and reporting ensure simple, repeatable power quality, switching loss, magnetic loss, harmonics measurements and more to meet the measurement demands of today’s efficient power converters. Plus, smart TekVPI current and differential probes reduce uncertainty and eliminate power measurement pitfalls.

Highlights

  • Opt. PWR: Advanced power measurement and analysis solution for characterization and testing of power devices and power supplies
  • Opt. USBPWR: Automated compliance testing for USB power adapters to USB2.0 Battery Charger Specification v1.1 and IEC 62684

Automotive serial analysis and compliance testing

Tek-mso5204_10a_h-HR.jpg

Simplify automotive system design debug and verification with protocol decode and serial trigger options for CAN, LIN and FlexRay buses. Ensure interoperability of BroadR-Reach and MOST serial devices with automated compliance testing.

Highlights

  • Opt. SR-AUTO: CAN, LIN, and FlexRay protocol trigger and decode of serial packet content
  • Opt. BRR: BroadR-Reach/100BASE-T1 and 1000BASE-T1 Automated Compliance Solution
  • Opt. MOST: Electrical compliance and debug test solution for MOST50 and MOST150

Embedded serial decoding and analysis

MSO5000_SPI_Bus_Setup_Source_Signal_Framing.jpg

Protocol decode, serial triggering, and analysis for I2C, SPI, RS-232/422/485/UART, USB 2.0, Ethernet, and MIL-STD-1553B simplify advanced system design debug and verification.

Highlights

  • Opt. SR-AERO MIL-STD-1553B protocol trigger and decode of serial packet content
  • Opt. SR-COMP RS-232/422/485/UART protocol trigger and decode of serial packet content
  • Opt. SR-DPHY MIPI® D-PHY automatic decode and search on serial packet content
  • Opt. SR-EMBD I2C and SPI protocol trigger and decode of serial packet content
  • Opt. SR-ENET 10BASE-T and 100BASE-TX protocol search and decode of serial packet content
  • Opt. SR-USB USB 2.0 low-speed, full-speed and high speed protocol trigger and decode of serial packet content

Serial compliance testing

Fig_57_8605.jpg

Ensure interoperability of USB 2.0 and Ethernet serial designs with automated compliance testing.

Highlights

  • Opt. ET3 Automated characterization, compliance and full PHY layer support for 10BASE-T, 100BASE-TX and 1000BASE-T
  • Opt. USB2 Perform "one touch" compliance testing with automated instrument and test mode control
  • Opt. HSIC Electrical signal quality test and protocol validation of HSIC host and device designs
  • Opt. DDRA Complete memory interface analysis package for DDR1/2/3/4, LPDDR1/2/3/4 and GDDR3/5

Advanced jitter and timing Analysis

MSO5000_DPOJET.jpg

With comprehensive jitter and eye-diagram analysis, and decomposition algorithms, DPOJET quantifies critical signal integrity parameters and enables you to identify noise sources in today's high-speed serial, digital, and communication system designs.

Highlights

  • Characterize performance of high-speed serial and parallel bus designs
  • Characterize clock and data jitter/noise and signal integrity
  • Characterize modulation of spread spectrum clock circuits
  • Perform PHY testing of serial standards such as MIPI® D-PHY, DDR, and MOST

Wideband RF analysis

DPO5000_eye_dark_panel.jpg

SignalVu RF and vector signal analysis software provides the functionality of a vector signal analyzer and spectrum analyzer, with the powerful trigger capabilities of a digital oscilloscope—all in a single package. Use SignalVu to easily validate wideband designs and characterize wideband spectral events.

Highlights

  • Opt. SVE: SignalVu Essentials provides wideband spectral analysis and measurements
  • Opt. SVA: SignalVu AM/FM/Direct audio measurements
  • Opt. SVM: SignalVu general-purpose modulation analysis
  • Opt. SVP: SignalVu advanced pulse signal analysis
  • Opt. SVT: SignalVu settling time measurements–frequency and phase
Data SheetSoftware Package / Software OptionDescriptionConfigure and Quote
TekScope Anywhere™

An offline waveform analysis tool that unchains your data from your scope and adds additional measurement capability.

Contact Us
Opt. BRR

BroadR-Reach/100BASE-T1 and 1000BASE-T1 Automated Compliance Solution.

Contact Us
Opt. DDRA, LP-DDR4

Complete memory interface analysis package for DDR1/2/3/4, LPDDR1/2/3/4 and GDDR3/5. Option LP-DDR4 for LPDDR4 is available to use only on MSO/DPO70000 oscilloscopes.

Contact Us
Opt. DJA, DJAN

Simplifies identifying signal integrity concerns, jitter and their related sources and provides the highest sensitivity and accuracy available for real-time oscilloscopes.

Contact Us
Opt. ET3

Automated characterization, compliance and full PHY layer support for 10BASE-T, 100BASE-TX and 1000BASE-T.

Contact Us
Opt. MOST

Electrical compliance and debug test solution for MOST50 and MOST150 host and device designs.

Contact Us
Opt. MTM

Compliance verification and interoperability testing to communication and computing serial standards masks.

Contact Us
Opt. PWR

Power measurement and analysis solution for characterization and testing of power devices and power supplies including power quality and harmonic testing.

Contact Us
Opt. SR-AERO

MIL-STD-1553B protocol trigger and decode of serial packet content.

Contact Us
Opt. SR-AUTO

CAN, LIN, and FlexRay protocol trigger and decode of serial packet content.

Contact Us
Low Voltage Single Ended Probes
Datasheet LinkProbeDescriptionConfigure and Quote
TAP1500 Active Probe: 1.5 GHz, 10X, Single-ended, TekVPI Configure & Quote
TAP2500 Active Probe: 2.5 GHz, 10X, Single-ended, TekVPI Configure & Quote
Current Probe
Datasheet LinkProbeDescriptionConfigure and Quote
TCP0020 Probe, AC/DC Current; 20 Amp; 50 MHz BW; TekVPI Interface; Certificate of Traceable Calibration Standard Configure & Quote
TCP0030A

Probe, AC/DC Current; 30 Amp DC, DC TO 120 MHZ; with TekVPI Interface; Certificate of Traceable Calibration Standard

Configure & Quote
TCP0150 Current Probe: 20 MHz, 5 mA to 212 A, AC/DC, TekVPI Configure & Quote
High Voltage Differential Probes
Datasheet LinkProbeDescriptionConfigure and Quote
TDP0500 Differential Probe: 500 MHz, 5X/50X, +/- 42V, TekVPI Configure & Quote
TDP1000 Differential Probe: 1 GHz, 5X/50X, +/- 42V, TekVPI Configure & Quote
THDP0100

Differential PROBE; 100 MHZ TekVPI DIFFERENTIAL HIGH VOLTAGE PROBE

Configure & Quote
THDP0200

Differential PROBE; 200 MHZ TekVPI DIFFERENTIAL HIGH VOLTAGE PROBE

Configure & Quote
TMDP0200

Differential PROBE; 200 MHZ TekVPI DIFFERENTIAL MEDIUM VOLTAGE PROBE;TMPD0200

Configure & Quote
Low Voltage Differential Probes
Datasheet LinkProbeDescriptionConfigure and Quote
TDP1500 Differential Probe: 1.5 GHz, 1X/10X, +/-8.5V, TekVPI Configure & Quote
TDP3500

Differential Probe: 3.5 GHz, 5X, +/- 2V, TekVPI

Configure & Quote
Isolated Probes
Datasheet LinkProbeDescriptionConfigure and Quote
TIVH02

Differential Probe; 200 MHZ, 50X/500X, TekVPI, 3 Meter Cable

Configure & Quote
TIVH02L Differential Probe; 200 MHZ, 50X/500X, TekVPI, 10 Meter Cable Configure & Quote
TIVH05

Differential Probe; 500 MHZ, 50X/500X, TekVPI, 3 Meter Cable

Configure & Quote
TIVH05L

Differential Probe; 500 MHZ, 50X/500X, TekVPI, 10 Meter Cable

Configure & Quote
TIVH08

Differential Probe; 800 MHZ, 50X/500X, TekVPI, 3 Meter Cable

Configure & Quote
TIVH08L

Differential Probe; 800 MHZ, 50X/500X, TekVPI, 10 Meter Cable

Configure & Quote
TIVM1 Differential Probe; 1 GHZ, 5X/50X, TekVPI, 3 Meter Cable Configure & Quote
TIVM1L Differential Probe; 1 GHZ, 5X/50X, TekVPI, 10 Meter Cable Configure & Quote
Passive Probe
Datasheet LinkProbeDescriptionConfigure and Quote
TPP0502

Passive Probe: 500 MHz, 2X, TekVPI

Configure & Quote
TPP1000

Passive Probe: 1 GHz, 10X, TekVPI

Configure & Quote
High Voltage Single Ended Probes
Datasheet LinkProbeDescriptionConfigure and Quote
TPP0850

High Voltage Probe: 800 MHz, 50X, 2.5 kV, Single-ended, TekVPI

Configure & Quote
Data SheetAccessoryDescription
119872600 POWER SUPPLY: AC-DC, EXTERNAL; 90-264VAC, 47-63 HZ, IEC320-C14 IN; 12VDC, 5A, CABLE WITH 5.5MM OD 2.1MM ID BARREL OUT; SAFETY CONTROLLED
HCTEK54 Hard Carrying Case
NEX-HD2HEADER NEXUS TECHNOLOGY, INC. MICTOR TO HEADER PIN ADAPTER
RMD5000 Rackmount Kit
TitleTypeDate
Understanding and Performing USB 2.0 Electrical Testing and Debugging
This application note provided an overview of USB 2.0 physical layer testing including signal quality, in-rush current check, drop and droop tests, as well as tests for high-speed mode.
Literature number: 55W-61400-0
Application Note 01 Jun 2018
TEKVISA CONNECTIVITY SOFTWARE, V4.0.4
TekVISA is the Tektronix implementation of VISA (Virtual Instrument Software Architecture), an industry-standard communication protocol. When installed on a PC, TekVISA provides communication with instruments that are connected to the PC via various…
Part number: 066093809
Driver 29 May 2018
Oscilloscope Selection Guide
From basic signal-checking to high-performance analysis, this selection guide gives an overview of the complete range of oscilloscopes from Tektronix. Comparison tables give high-level specifications and features, and indicate the major differences…
Literature number: 46Z-31080-3
Selection Guide 27 May 2018
Mixed Signal Oscilloscopes
MSO5000B, DPO5000B Series Datasheet Designing with today’s faster data rates and tighter timing margins requires an oscilloscope with outstanding signal acquisition performance and analysis capabilities. Tektronix MSO/DPO5000B Series oscilloscopes provide exceptional signal fidelity, with 2…
Literature number: 48W-29560-9
Datasheet 25 May 2018
In-circuit Measurements of Inductors and Transformers in Switch Mode Power Supplies
Get a quick review of inductor and transformer theory, and learn how to use an oscilloscope with power analysis software to perform dynamic inductance measurements under operating conditions.
Literature number: 55W-61401-0
Application Note 18 May 2018
How to Minimize Probe Loading with Low Capacitance Probes
This application note describes how the high bandwidth, low capacitance passive voltage Tektronix probes bridge the gap between general purpose passive probes and higher cost active probes.
Literature number: 51W-26294-5
Application Note 17 May 2018
How do I use the programmer manual for my instrument?
TekVISA Download Link: TEKVISA CONNECTIVITY SOFTWARE Hello and welcome to Tektronix, today I’m presenting the last part in the 3-part series on using TekVISA. I’ll be giving a basic overview of programmer manuals and how to use them to find the correct…
FAQ ID: 69186 17 May 2018
How do I get the trigger time (timestamp) from my scope?
When a waveform is acquired on the DPO/DSA/MSO 5K 7K 70K Series oscilloscopes, the scope records a timestamp of when it was triggered to acquire that waveform.  However, fetching the value of this timestamp is not always so obvious. The timestamp from the…
FAQ ID: 471576 15 May 2018
How to extract the trigger time stamp from a Tektronix .wfm file?
The .wfm waveform files saved from Tektronix DPO/DSA/MSO 5K 7K 70K and 5 Series MSO oscilloscopes contains a time stamp that indicates the time that the scope was triggered. This example program shows how you can extract this time stamp from the file…
FAQ ID: 471231 08 May 2018
TekExpress Automotive Ethernet (100/1000BASE-T1) Automated Compliance Solution - DPO-MSO 5000/B-7000C-70000C-D-DX - V10.2.0
The Tektronix TekExpress Automotive Ethernet solution provides automated compliance test support for 100Base-T1 (IEEE Std.802.3bw) and 1000Base-T1 (IEEE Std 802.3bp™-2016) standard for Transmitter electrical specificationsb tests. The compliance software…
Part number: 066186008
Application 08 May 2018
Downloads
Download

Download Manuals, Datasheets, Software and more:

Go to top