お問い合わせ

製品購入に関するご質問　ライブ・チャット：午前9時～午後4時まで

ダウンロード

マニュアル、データシート、ソフトウェアなどのダウンロード：

ダウンロード・タイプ
型名またはキーワード

フィードバック

製品カタログ

Clarius Compliance DisplayPort Tx v4.0.0

Clarius Compliance DisplayPort Tx provides the most comprehensive solution to serve the need of engineers designing DisplayPort silicon for computer systems and embedded systems, as well as for those who are validating the physical-layer compliance of DisplayPort devices as per the DisplayPort 1.4 and 2.1 compliance Test Specification. The Clarius Compliance DisplayPort Tx application is compatible with Tektronix DPO/MSO 70000 DX/SX Series oscilloscopes that are designed to meet the challenges of the next generation of display standards. The Clarius Compliance solution is a new-generation compliance test automation software solution. The solution offers a range of features and benefits, including: • Fully automated source-device Compliance testing across all DisplayPort™ 2.1 data rates (RBR, HBR, HBR2, HBR3, UHBR10, UHBR13.5, and UHBR20) with measurements aligned to the latest DisplayPort 2.1 Compliance Test Specification (CTS), including both normative and informative tests.• Higher asset utilization and faster test times: disaggregated architecture to offload analysis from the oscilloscope.• Easy workflow integration: leverage REST APIs and SDK for faster automation.• Integrated data management for results, reports, and waveforms in UI along with dashboard view• Execute complete multi-rate and full 4-lane testing in a single go.• Automated DUT control through Unigraf DPR-100 and UCD-323, eliminating manual configuration and significantly reducing validation time.• Automatic insertion of channel loss models, CTLE equalization, and DFE as defined by the CTS.• Support testing at both TP2 and TP3EQ test points.• CTLE optimization for UHBR data rates.• Integrated fixture de-embedding (single-ended and differential) using custom filter files generated via SDLA software, enabling accurate channel modeling and receiver equalization.• Custom non-Compliance (Custom DP) application allowing user-defined measurement configurations and parameter control for debug purpose.• Ability to modify test conditions based on DUT configuration, including SSC, pattern selection, and other link parameters.• Signal validation pre-checks to detect waveform anomalies prior to analysis, improving result reliability.• Support for P0–P15 transmitter presets for UHBR data-rate signal testing.• Transmitter preset equalization testing for all UHBR data rates.• Automated preset optimization to determine optimal presets independently for TP2 and TP3EQ per lane and per UHBR data rate.• Quick test setup and reruns using saved test sequences.• Offline analysis using previously captured waveforms (pre-recorded mode).• Waveform and measurement plots displayed directly in the user interface.• Detailed PDF test reports.• Clear pass/fail summary table for all executed tests.• Detailed test information for each measurement.• Margin analysis reported for every test.• Consolidated report covering the complete test run.• End-to-end, cost-effective DisplayPort 2.1 Compliance validation platform combining automation software, Compliance fixtures, and SMA probing support for Compliance validation.

該当製品： DPS75004SX, DPS75904SX, DPS77004SX, DPO75002SX, DPO75902SX, DPO77002SX, DPO71304SX, DPO71604SX, DPO72004SX, DPO72304SX, DPO72504SX, DPO73304SX, DPO72304DX, DPO72504DX, DPO73304DX, MSO72304DX, MSO72504DX, MSO73304DX

関連製品情報