質問:
What device adapters were available for the Tektronix curve tracer models 370A, 370B, 371 and 371A?
回答:
The adapaters that were available for the curve tracers are listed below:
Model |
Usage |
Pins |
Max Volts (socket) |
A1001 |
Blank Adapter |
6 |
N/A |
A1002 |
TO-220 Transistors (with in-line leads) |
6 |
1KV |
A1003 |
T0-3/TO-66 Power Transistors |
6 |
2KV |
A1004 |
Offset Lead Power Transistors |
6 |
1.5KV |
A1005 |
Axial Lead Diodes |
4 |
2KV |
A1006 |
Dual Long Lead Transistors |
5 |
1KV |
A1007 |
Dual Transistor |
5 |
500V |
A1008 |
Dual Long Lead Transistors |
5 |
1KV |
A1009 |
Dual FET |
5 |
500V |
A1010 |
DIP IC (16 Pin Max) |
5 |
500V |
A1023 |
SOT23 Surface Mount Transistors |
3 |
1KV |
A1024 |
TO-252 (D-PAK) |
5 |
1KV |
The 5-pin Dual adapters (A1006, A1007, A1008, and A1009) were equipped with jumpers that allowed the emitter pin(s) of the right hand (or bottom) socket(s) to be connected to the adapter's emitter terminal.
Another use of the jumper was to short the base and collector terminals of either socket for applications such as gathering data for the Gummel-Poon model which deals with ib vs vbe with vbc = 0. The jumper shorted the base to the collector to achieve vbc = 0
-----------------------------------------------------------------
The 370A/B was shipped standard with the A1001, A1002, A1005, and A1007.
The 371A was shipped standard with the A1002 and A1003.
FAQの該当製品:
製品シリーズなし
製品:
FAQ ID 62871
すべてのFAQを表示 »