お問い合わせ
ダウンロード
マニュアル、データシート、ソフトウェアなどのダウンロード：
フィードバック
PSPL5335 -- 1:4 Amplified 4-Way Splitter, Datasheet
PSPL5335 Datasheet
このデータ・シートの製品は、テクトロニクスでは販売終了となっています。
Tektronix Encoreプレミアム再生品を見るbr/>
上記製品のサポートと保証のステータスをチェックする
The PSPL5335 Amplified Splitter provides an effective way to distribute a single signal to four ports with no loss in amplitude. The PSPL5335 is not optimized for data transmission, it can be used as a clock splitter or general purpose amplifier. Unused ports can be left unterminated.
Key performance specifications
- 0 dB nominal insertion loss
- Equal distribution to four ports
- Single power supply
Typical performance
Specifications
| Parameter | Performance | |||
|---|---|---|---|---|
| Polarity | Inverting | |||
| Input / output coupling | AC | |||
| Input / output impedance | 50 Ω | |||
| Bandwidth (-3 dB) | 100 MHz to 35 GHz 1 | |||
| Insertion loss | 0 dB | |||
| Input return loss 40 MHz 20 GHz | -10 dB 1 -6 dB 1 |
|||
| Output return loss 40 MHz | -7 dB 1 | |||
| Group delay | 350 ps | |||
| Output power at 1 dB gain compression | +4 dBm | |||
| Warranty | One year | |||
| Parameter | Units | Minimum | Typical | Maximum | Comments |
|---|---|---|---|---|---|
| DC supply voltage | VDC | 4.75 | 5.5 | ||
| DC supply current | IDC | 400 | 600 | Damage threshold 2 | |
| Maximum allowed input | Vamp | 2 | Damage threshold | ||
| Power dissipation | W | 2 | 3.3 | ||
| Operating temperature | °C | 25 |
Mechanical dimensions
1 Tested in production at 25 °C.
2 Tektronix recommends setting a current limit on the DC supply. Certain operating conditions (such as driving with low duty cycle negative-going pulses) can increase the supply current and cause the device to overheat.
Ordering information
Models
- PSPL5335
- Port 1 (input), 2.92 mm jack (f), Ports 2 - 5 (outputs), 2.92 mm jack (f)