Contact us
Call us at
Available 6:00 AM – 5:00 PM (PST) Business Days
Download
Download Manuals, Datasheets, Software and more:
Feedback
Logic Analyzer Probe Selection Guide
P6400 Series
Notice to EU customers
This product is not updated to comply with the RoHS 2 Directive 2011/65/EU and will not be shipped to the EU. Customers may be able to purchase products from inventory that were placed on the EU market prior to July 22, 2017 until supplies are depleted. Tektronix is committed to helping you with your solution needs. Please contact your local sales representative for further assistance or to determine if alternative product(s) are available. Tektronix will continue service to the end of worldwide support life.
Logic Analyzer P64xx Probe Selection Guide
|
||||
---|---|---|---|---|
Logic Analyzer Used |
TLA520x Logic Analyzer |
|||
Recommended Use |
General-purpose applications that require maximum flexibility |
Applications requiring many channels to be quickly connected in a small footprint |
Applications requiring high channel count, a small footprint and fast connections |
Applications requiring high signal density, quick reliable attachment and the best signal integrity |
Attachment to Target System |
Flying Leadset with Accessories |
Connectorless "compression" contact (Adapter for Mictor connector available) |
AMP Mictor 34-channel connector |
D-Max™ Probing Technology Connectorless “compression” cLGA |
Probe Type |
General-purpose, 17-channel probe |
High-density, 17-channel probe |
High-density, 34-channel probe |
High-density, 34 channel probe |
Pin Spacing Supported |
0.100 in. and 2 mm |
N/A |
||
Logic Signals Supported |
Single-ended Clock and Data (Differential signal adapters available) |
Single-ended Clock and Data |
Single-ended Clock and Data |
Single-ended Clock and Data |
Simultaneous State/Timing |
235 MHz/ 8 GHz |
235 MHz/ 8 GHz |
235 MHz/ 8 GHz |
235 MHz/8 GHz |
Minimum Signal Amplitude Minimum Single-ended |
500 mVp-p |
500 mVp-p |
500 mVp-p |
500 mVpk-pk |
Probe Load AC/DC |
<2 pF/20 k. to 0 V |
<0.7 pF/20 kΩ to 0 V (TLA5000) |
2 pF/20 kΩ to 0 V (TLA5000) |
<0.7 pF/20 k. to 0 V |
Notes |
Works with a wide-range of industry-standard accessories for flexible attachment to your target system Differential Signals adapters are available. Also compatible with TLA7Lx/Mx/Nx/Px/Qx Logic Analyzer Modules. |
No connector required; only land pads required to be laid out on target system. Adapter for Mictor connector available. Also compatible with TLA7Lx/Mx/Nx/Px/Qx Logic Analyzer Modules. |
Requires AMP Mictor connector to be installed on target system PCB for every 34 channels. Adapter to use P6434 with P6860/80 high-density compression land footprint available. Also compatible with TLA7Lx/Mx/Nx/Px/Qx Logic Analyzer Modules. |
No connector required; only land pads required to be laid out on target system PCB for 34 channels. Optional Flying leadset is available. Also compatible with TLA7Lx/Mx/Nx/Px/Qx Logic Analyzer Modules. |