Contactez-nous

Chat en direct avec un représentant Tek. Service disponible de 9 h à 17 h, CET jours ouvrables.

Téléphone

Appelez-nous au

Disponible de 9 h à 17 h CET jours ouvrables.

Télécharger

Télécharger des manuels, des fiches techniques, des logiciels, etc. :

TYPE DE TÉLÉCHARGEMENT
MODÈLE OU MOT CLÉ

Feedback

Logic Analyzer Probe Selection Guide

P6400 Series

Notice to EU customers

This product is not updated to comply with the RoHS 2 Directive 2011/65/EU and will not be shipped to the EU. Customers may be able to purchase products from inventory that were placed on the EU market prior to July 22, 2017 until supplies are depleted. Tektronix is committed to helping you with your solution needs. Please contact your local sales representative for further assistance or to determine if alternative product(s) are available. Tektronix will continue service to the end of worldwide support life.

Logic Analyzer P64xx Probe Selection Guide

 

P6410

P6419

P6434

P6450

Logic Analyzer Used

TLA520x Logic Analyzer

Recommended Use

General-purpose applications that require maximum flexibility

Applications requiring many channels to be quickly connected in a small footprint

Applications requiring high channel count, a small footprint and fast connections

Applications requiring high signal density, quick reliable attachment and the best signal integrity

Attachment to Target System

Flying Leadset with Accessories

Connectorless "compression" contact (Adapter for Mictor connector available)

AMP Mictor 34-channel connector

D-Max™ Probing Technology Connectorless “compression” cLGA

Probe Type

General-purpose, 17-channel probe

High-density, 17-channel probe

High-density, 34-channel probe

High-density, 34 channel probe

Pin Spacing Supported

0.100 in. and 2 mm

N/A

Logic Signals Supported

Single-ended Clock and Data (Differential signal adapters available)

Single-ended Clock and Data

Single-ended Clock and Data

Single-ended Clock and Data

Simultaneous State/Timing

235 MHz/ 8 GHz

235 MHz/ 8 GHz

235 MHz/ 8 GHz

235 MHz/8 GHz

Minimum Signal Amplitude Minimum Single-ended

500 mVp-p

500 mVp-p

500 mVp-p

500 mVpk-pk

Probe Load AC/DC

<2 pF/20 k. to 0 V

<0.7 pF/20 kΩ to 0 V (TLA5000)

2 pF/20 kΩ to 0 V (TLA5000)

<0.7 pF/20 k. to 0 V

Notes

Works with a wide-range of industry-standard accessories for flexible attachment to your target system

Differential Signals adapters are available.

Also compatible with TLA7Lx/Mx/Nx/Px/Qx Logic Analyzer Modules.

No connector required; only land pads required to be laid out on target system.

Adapter for Mictor connector available.

Also compatible with TLA7Lx/Mx/Nx/Px/Qx Logic Analyzer Modules.

Requires AMP Mictor connector to be installed on target system PCB for every 34 channels.

Adapter to use P6434 with P6860/80 high-density compression land footprint available.

Also compatible with TLA7Lx/Mx/Nx/Px/Qx Logic Analyzer Modules.

No connector required; only land pads required to be laid out on target system PCB for 34 channels.

Optional Flying leadset is available.

Also compatible with TLA7Lx/Mx/Nx/Px/Qx Logic Analyzer Modules.