Question :
I'm connecting a TDS2000B to a PictBridge printer using a USB-B to USB-B cable and the scope displays "Please connect printer" message when I press the print button - what's wrong?
Answer :
You should be using a USB-B to USB-A cable. Connect the USB-B end of the cable to the TDS2000B rear panel USB device port (marked with PictBridge symbol), and connect the USB-A end of the cable to the USB host port (marked with PictBridge symbol) on the PictBridge printer.
This FAQ Applies to:
No product series
Product:
FAQ ID 59591
View all FAQs »