Picosecond Power Dividers and Pick-Off Tees
Picosecond Power Dividers and Pick-Off Tees
These products are no longer available for purchase.
Picosecond Pulse Labs is now part of Tektronix. The same leading performance you have come to expect from Picosecond Pulse Labs products is now available with the worldwide support and backing of Tektronix.
Tektronix Power Dividers are resistive tees that have excellent performance and frequency response from DC to as high as 50 GHz. Models PSPL5331, PSPL5333, and PSPL5350 split the signal into two equal replicas of the input signal. Both outputs are 6 dB down from the input power.
Several versions of Pick-Off Tees are available. These components produce a small replica of a signal at a pick-off port, at ratios of 10, 14, or 20 dB down from the input signal level.
The output ratio in the table below refers to the power ratio of the pick-off port to the input signal, and the power ratio of the through-line to the input signal respectively.
|PSPL5331 6 dB Power Divider, 18 GHz Datasheet|
PSPL5331 DatasheetThe PSPL5331 6 dB Power Divider is a very broadband, resistive tee. It is useful for splitting a signal into two identical signals or for combining two signals. The output is attenuated by 6 dB. These are impedance-matched tees that present a 50 Ω input…
Literature number: 1PW-30595-0
|PSPL5350 6 dB Power Divider, 50 GHz|
PSPL5350 DatasheetThe PSPL5350 6 dB Power Divider provides excellent amplitude and phase performance power division from DC to frequencies over 40 GHz. The outputs are nominally attenuated by 6 dB. All ports are impedance matched to 50 Ω when both outputs are terminated in…
Literature number: 1PW-30599-0
|PSPL5361 14 dB 5x Pick-off Tee|
PSPL5361 DatasheetThe PSPL5361 is a broadband, resistive pick-off tee. The pick-off Port 3 output is a 1/5 scale replica of the signal passing through the tee. The PSPL5361 exhibits excellent through-line insertion loss and pick-off stability from DC to over 40 GHz. It…
Literature number: 1PW-30592-1
|PSPL5334 1:4 Resistive Divider|
PSPL5334 1:4 Resistive DividerThe PSPL5334 Resistive Divider is an Ultra-Broadband Resistive Coupler that provides even division of an input signal between four output ports. The device exhibits excellent through-line insertion loss stability for frequencies from DC to >25 GHz. The…
Literature number: 1PW-30597-0
|PSPL5340 10 dB Pick-off Tee Datasheet|
PSPL5340 DatasheetThe PSPL5340 is a broadband, resistive, Pick-Off, Power Divider Tee. The pick-off port 3 output is a small replica of the signal passing through the tee. The PSPL5340 is an impedance-matched tee consisting of three precision, 1% tolerance resistors. The…
Literature number: 1PW-30591-0
|PSPL5336 -- 6 dB Power Splitter, 20 GHz, Datasheet|
PSPL5336 DatasheetThe PSPL5336 6 dB Power Splitter is a very broadband, resistive tee. It is useful for splitting a signal into two identical signals. The output is attenuated by 6 dB. This is an impedance-matched tee that presents a 50 Ω input impedance when both outputs…
Literature number: 1PW-30598-0
|PSPL5380 PAM-4 Combiner Kit Datasheet|
PSPL5380 DatasheetThe PSPL5380 kit is part of the PatternPro PAM-4 multi-level source and measurement BERT system. The PSPL5380 works with the output from PPG pattern generators to create PAM-4 test signals.
Literature number: 1PW-30600-0
|PSPL5333 6 dB power divider, 25 GHz|
PSPL5333 DatasheetThe PSPL5333 Power Divider is an ultra-broadband resistive coupler, which provides even division of an input signal at the output ports. The device exhibits excellent through-line insertion loss stability for frequencies from DC to >25 GHz. The…
Literature number: 1PW-30596-0
|Z-Matched Pick-off Tee|
PSPL5372 Datasheet The PSPL5372 Z-Matched Pick-off Tee is an ultra-broadband resistive device that provides a scaled 5x (14 dB) pick-off of the input signal. The PSPL5372 exhibits excellent through-line impedance match to 50 ohms for frequencies from DC to 26 GHz, unlike co…
Literature number: 1PW-30594-0
|PSPL5370 Ultra-Broadband Pick-off Tee|
PSPL5370 DatasheetThe PSPL5370 Pick-off Tee is an ultra-broadband resistive coupler, which provides a scaled (5x or 10x) replica of signals passing through the tee. The device exhibits excellent through-line insertion loss and pick-off ratio stability for frequencies from…
Literature number: 1PW-30593-0
|PSPL Test and Measurement Component Selection Guide|
This is a component guide with ordering information for Tektronix PSPL Pulse Generators, including Amplifiers and Drivers, Attenuators, Baluns and Transformers, DC Blocks, Bias Tees, Low-Pass Filters, Impulse Forming Networks, Power Dividers and Pick-off…
Part number: 55W-30714-3