80SJNB, 80SJARB, and SDLA Visualizer software run on the DSA8300 instruments with Windows 7 Operating System. This release of 80SJNB adds a TDECQ option in support of 100 – 400 Gbps, PAM4 signal analysis, with focus on the TDECQ (Transmitter and Dispersion Eye Closure for PAM4) optical measurement.This release of 80SJNB also extends the Jitter, Noise, and BER analysis previously provided for NRZ and PAM4 signaling with additional optical measurements performed in accordance with IEEE standards, such as OMA – Optical Modulation Amplitude for each eye of the PAM4 stack, and the global OMA outer measurement. This release includes Extinction Ratio with a correction factor control to compensate for offsets and drifts and Average Optical Power measurements for PAM4 signals.This new version of 80SJNB also expands the modeling of the Receiver with added optimization methods for the decision thresholds and sampling phases in accordance to IEEE and OIF/CEI standards. 80SJNB link simulation Equalization was enhanced to support PAM4 signaling, with focus on the optimization of the TDECQ measurements.As before, the PAM4 option builds on the Advanced option, and supports comprehensive analysis on PAM4 signals.80SJNB Essential provides Jitter, Noise and BER analysis for NRZ signals. The Advanced option adds capabilities for de-embedding of text fixtures, channel emulation based on TDR/TDT and S-parameter models, and CTLE, FFE, DFE equalizer support.80SJARB software provides basic jitter measurements (including J2 and J9 as specified by IEEE 802.3ba) for arbitrary data signals acquired by the Tektronix DSA8300 Digital Serial Analyzer sampling oscilloscope. This version delivers improvements to the jitter decomposition algorithm. 80SJARB is a companion software application to 80SJNB, included in the same installer, and available either with its own license, or whenever any 80SJNB license is found.SDLA Visualizer is a complete measurement circuit de-embed environment, which removes reflections, cross-coupling, and loss caused by fixtures, and cables, allowing visibility of the true circuit behavior.MODELS:DSA8300PREREQUISITES:TekScope application version 18.104.22.168 or later is required before installing the Jitter Apps.
- Version: V22.214.171.124
- Software Type: Application
- Release Notes: Download 80SJNB_80SJARB_SDLA_ReleaseNotes_066134710.txt
- Release Date:
- Part Number: 066134710
- Installation Instructions: Download Installation_066134710.txt
By downloading, you agree to the terms and conditions of the Software Download Agreement.
This software applies to: DSA8300