MDC4500-4B C-PHY/D-PHY Amplifier/Combiner for AWG70000 Signal Generator
The MDC4500-4B is a certified one-box solution for simplifying your MIPI C-PHY/D-PHY test setup.
Designed to work with the Tektronix AWG70002A, the MDC4500-4B is designed to condition the output to meet the conditions needed for C-PHY/D-PHY compliance test.
Reduce setup time, troubleshooting overhead, and test uncertainty with an all-in-one integrated solution.
|Designed to meet the MIPI Alliance C-PHY/D-PHY compliance test||Single-box solution that eliminates the need for external filters, amplifiers, and attenuators while guaranteeing that your AWG’s output matches the guidelines set forth by the MIPI Alliance.|
|Software control and automation||The MDC4500-4B is controlled via software over a USB connection to a Tektronix AWG. The operation of the components inside the MDC is fully automated by the AWG software.|
|Compact 1U form factor||
The MDC4500-4B was designed to be stackable and rack-mountable. Its slim 1U form factor and lightweight design replace dozens of yards of extra cabling and free standing RF components, thus allowing for a more robust, compact test setup.