What improvements were made with FW version 3.23 for the CT100?

Four modifications were made:

THE FIRMWARE WAS CHANGED TO RECOGNIZE AND REPORT THESE SPECIAL EOC MESSAGES CORRECTLY.
THE FIRMWARE WAS CHANGED TO INCLUDE A REDESIGNED XILINX PATTERN WHICH CONTROLLED EDGE TIMING MORE CLOSELY.
A NEW FEATURE WAS ADDED TO ALLOW THE USER TO IDENTIFY WHETHER 7 OR 10 DIGITS ARE REQUIRED IN THE TESTING AREA.
MODIFIED THE FIRMWARE SUCH THAT THE 40 KHZ TONE CONTROL WAS BEING DONE INSIDE A CRITICAL SECTION, WHERE ALL OTHER HARDWARE CONTROLS ARE PERFORMED

This FAQ Applies to:

No product series

Product:

FAQ ID 57716