與我們聯絡

提出問題

與 Tek 業務代表即時對談。 上班時間：上午 6:00 - 下午 4:30 (太平洋時間)

致電

請致電

與 Tek 業務代表即時對談。 上班時間：上午 8:30 - 下午 5:30 (太平洋時間)

下載

下載手冊、產品規格表、軟體等等：

下載類型
機型或關鍵字

意見回饋

在 2023 年 Tektronix 創新論壇上取得未來工程設計的門票。免費技術研討會。立即註冊。

產品支援和下載

歡迎使用 Tektronix 產品支援

在我們整天與您愉快「討論技術」的時候，我們知道您很著急。所以我們讓您能夠輕鬆地下載所有目前產品和多項已停產產品的手冊、產品規格表和軟體。只要告訴我們您目前所用的產品，我們就會向您呈現所擁有的一切資訊。

輸入型號:
Search by Product Category (optional)

  1. 開始在以上欄位輸入 Tektronix 或 Keithley 產品的型號或產品系列。

  2. 開始輸入後，在搜尋欄位中尋找出現的產品名稱。

  3. 從結果清單中選取有效的產品名稱。

  4. 按一下前往，即可查看適用於您產品的支援資訊。

搜尋提示：若想看見最多的結果，請選擇適用於您產品的基本機型名稱。避免選擇特定選項或您在清單中可能看到的配置。

您選擇的產品機型目前尚有存貨可供購買。 該產品提供以下支援資訊。

  • 常見問答集 常見問答集 ID
    TRCP0300 Probe Leads Length
    Question: How long are the probe leads for the TRCP0300? Answer:  - Cable Length: 1 m - Circumference: 80 mm - Coil Diameter: 1.7 mm - Loop Diameter: 25 mm - Output Cable: 0.5 m - BNC to BNC 50 Ω Cable Scope Termination 1 MΩ BNC     		KB-01196
  • Improving Shunt Based Current Measurements with IsoVu Isolated Current Probes_en
    使用 IsoVu 絕緣電流探頭改善分流式電流量測
    這是關於使用 Tektronix 新型寬頻、低功率分流器進行基於分流器的電流測量的技術演示視訊。這些分流器為無與倫比的頻寬、隔離和保護設定了新的標準。我們將解釋電流軸器的基本原理，以及為什麼它們是在沒有寄生電感影響測試的情況下進行更精確的測量的更好選擇。
    期間: 8m 20s
    使用 IsoVu 電流和電壓探棒的高端雙脈衝切換損耗
    該影片向使用寬能隙 SiC 和 GaN 電源轉換器的工程師示範如何進行精確的高端雙脈衝量測。應用工程師 Seamus Brokaw 使用 IsoVu™ 隔離電流探棒、隔離電壓探棒和執行雙脈衝測試應用軟體的 5 系列 B MSO。解釋了測試設定、探棒選擇和偏移校正後，他展示了用於確定切換損耗的雙脈衝測試，然後是 di/dt、峰值汲極電壓、dV/dt 和反向還原量測等關鍵參數。
    期間: 13 分 11 秒
    2 Series MSO Mixed Signal Oscilloscope Technical Product Overview
    2 Series MSO Mixed Signal Oscilloscope Technical Product Overview
    This video gives an overview of the 2 Series MSO Mixed Signal Oscilloscope. It includes a brief introduction of key features and specifications, then discusses details about the modern user …
    期間: 16m 3s
    2 Series MSO Mixed Signal Oscilloscope Introduction
    2 Series MSO Mixed Signal Oscilloscope Introduction
    This video provides a short introduction of the key features and specifications of the 2 Series MSO Mixed Signal Oscilloscope.
    期間: 3m 53s
    2 Series MSO Mixed Signal Oscilloscope - Remote Collaboration
    2 Series MSO Mixed Signal Oscilloscope - Remote Collaboration
    This video provides an overview of how your global engineering teams can easily collaborate remotely with the 2 Series MSO Mixed Signal Oscilloscope.
    期間: 3m 16s
    2 Series MSO Mixed Signal Oscilloscope Modern User Interface and Simplified Controls
    2 Series MSO Mixed Signal Oscilloscope – Modern User Interface and Simplified Controls
    This video provides an overview of the touchscreen user interface and simplified controls featured with the 2 Series MSO Mixed Signal Oscilloscope.
    期間: 2m 26s
    2 Series MSO Mixed Signal Oscilloscope Integrated Arbitrary Function Generator
    2 Series MSO Mixed Signal Oscilloscope – Integrated Arbitrary Function Generator
    This video provides an overview of the integrated arbitrary function generator available with the 2 Series MSO Mixed Signal Oscilloscope.
    期間: 1m 44s
    2 Series MSO Mixed Signal Oscilloscope Advanced Triggering and Search and Protocol Decode
    2 Series MSO Mixed Signal Oscilloscope – Advanced Triggering and Search and Protocol Decode
    This video provides an overview of the advanced trigging, search and protocol decode capabilities of the 2 Series MSO Mixed Signal Oscilloscope.
    期間: 2m 30s
    2 Series MSO Mixed Signal Oscilloscope A Full Set of Analysis Tools
    2 Series MSO Mixed Signal Oscilloscope – A Full Set of Analysis Tools
    This video provides an overview of the analysis tools offered by 2 Series MSO Mixed Signal Oscilloscope.
    期間: 2m 22s
    多通道頻譜分析
    Being able to see the frequency content of a signal is extremely useful for troubleshooting.  Being able to see multiple channels of spectrum analysis, synchronized with signals in the time domain …
    期間: 4m 55s
    4 Series B MSO - Outstanding Measurement Performance
    The 4 Series B MSO oscilloscope offers powerful measurement and debugging tools. Watch this video to learn about visual triggers, segmented memory, 12 to 16-bit vertical resolution, automated …
    期間: 3m 50s
    4 Series B MSO - Waveform Display and Controls
    This video will give you a taste of the 4 Series B MSO's award-winning user interface, integrating an HD touchscreen display with traditional knobs and buttons. By the end of this video you will …
    期間: 3m
    4 Series B MSO - Probes, Protocols, Spectrum Analysis, Power Analysis, and More
    The 4 Series B MSO is a versatile addition to your bench, addressing scores of signal types and applications. This video touches on available probes, RF spectrum analysis, mixed signal analysis …
    期間: 5m 8s
    4 Series B MSO Oscilloscope Overview
    This video provides an overview of the new 4 Series B MSO oscilloscope, including key measurement specifications and highlighting the new faster processor, analysis capabilities and the award …
    期間: 3m 6s
    Scope Embedded Power Integrity Analysis: PDN Analysis on 4, 5 and 6 Series B MSOs
    Watch this demonstration of Scope Embedded Power Integrity Analysis (SEPIA) and learn how it compares with traditional methods for evaluating the stability of a voltage regulator and power …
    期間: 7m 59s
    DDR5 Test Challenges
    Prepare for DDR5 Test Challenges
    DDR5 memory pushes the limits of high-speed signaling and tackles the bandwidth challenge imposed by the exponential growth of data generation. See the latest characterization and debug techniques …
    期間: 2:46
    Double Pulse Test Demo Using New Software Deskew Feature
    Eliminating timing skew between voltage and current probes is a critical step in making accurate power and energy measurements on an oscilloscope. In this video, we demonstrate how the latest …
    期間: 3m 35s
    How to Compensate a Passive Probe
    Accurate measurements start with a properly compensated probe. In this short video, we’ll show you how to compensate a passive probe on the Tektronix 2 Series MSO. Just a quick adjustment ensures …
    期間: 1m 9s
    How to Set Up Horizontal Scale on the 2 Series MSO
    Learn how to set up and fine-tune the horizontal system on your Tektronix 2 Series MSO. We’ll show you how to adjust the timebase using the horizontal scale knob, touchscreen gestures, and manual …
    期間: 1m 35s
    How to Set Up Vertical Scale on the 2 Series MSO
    The vertical scale setting on your oscilloscope directly affects signal visibility and measurement accuracy. In this quick tutorial, we show you how to adjust the vertical scale on the Tektronix 2 …
    期間: 1m 36s
    Making Measurements on the 2 Series MSO
    Making measurements on your oscilloscope has never been easier. In this demo, we walk through three common measurement techniques on the Tektronix 2 Series MSO: manual observation, cursor …
    期間: 2m 9s
    Get Started with Digital Signal Measurements on the 2 Series MSO
    Watch this quick video to see how the Tektronix 2 Series MSO lets you view, trigger on, and decode logic signals alongside analog waveforms. We’ll walk you through probe setup, threshold settings …
    期間: 2m 24s
    How to Use Oscilloscope Cursors and Callouts for Easy Waveform Annotation
    Often, when using an oscilloscope, one needs to make quick on-screen measurements and add notes to waveforms. Cursors can be used to take quick, precise measurements, while callouts can be used to …
    期間: 7m 18s
    Gain Insights with the Spectrogram Feature of Spectrum View
    See how you can get more insight to transient and dynamic behavior of the spectral content of your signals. Using the new spectrogram feature, an enhancement of the RF vs time option for Spectrum …
    期間: 7:15
    CAN Bus Decoding and Triggering
    This video covers the basics of CAN bus decoding on Tektronix oscilloscopes as well as the setups for decoding, triggering and searching for specific values or conditions.
    期間: 5m 16s
    CAN XL Decoding and Triggering with an Oscilloscope
    CAN XL is a third generation of CAN bus, designed to bridge gaps between existing CAN standards and higher data-rate standards such as Automotive Ethernet.  This short video shows how to set up …
    期間: 3m 45s
    Solving Key LPDDR5 DRAM Test Challenges
    Watch the webinar, How to Solve Key LPDDR5 DRAM Test Challenges, for test tips and techniques to meet the design challenges posed by this mobile memory standard.
    期間: 45:30
    USB4 Webinar
    View our USB4 Compliance and Characterization Test webinar to learn how you can address the measurement challenges associated with the new USB4 standard.
    期間: 22m 14s
    Multi-Channel Wireless Modulation Analysis
    See how oscilloscopes such as the 6 Series B MSO Mixed Signal oscilloscope are enabled by advanced features of Tektronix SignalVu-PC software to provide RF spectral and modulation analysis across …
    期間: 5:08
    Python_Programming
    Test Automation and Python Programming
    Customers across all industries and applications are using automation to extend the capabilities of their oscilloscopes.  Here we cover what you need to get started programming scopes in Python.  …
    期間: 31:09
    Connect to an Oscilloscope Using tm_devices
    Combining the power of Python and Tektronix oscilloscopes makes complex testing procedures more efficient, accurate and customizable. This short video shows how to use tm_devices, the Tektronix …
    期間: 2m 5s
    Tektronix tm_devices V1.4 - What's New
    Watch this video to learn what's new in V1.4 of tm_devices - the Tektronix device management package that enables better control and usage of test & measurement devices in Python scripts.
    期間: 3m 47s
    License Install on DPO-MSO70000 C/DX/SX Oscilloscopes
    Learn how to install a license, either fixed or floating, on DPO/MSO70000C, DPO/MSO70000DX and DPO70000SX oscilloscopes.     
    期間: 2:38
    USB4 Compliance Test Fixturing
    Learn about changes to the official USB4 compliance test fixtures available from Wilder Technologies and the impact those changes will have on how tests are physically configured and what …
    期間: 4:04
    TekScope V2-4 - Whats New
    Watch this short video to learn about the new features in TekScope version 2.4, including TekScope Basic – a new free tier license, maintenance licenses, fast frames with improved support, a new …
    期間: 4m 39s
    TekExpress Demo Multigigabit Ethernet
    A demonstration of TekExpress Automotive Ethernet, an automated application, for Automotive Multigigabit Ethernet (IEEE802.3ch) Compliance Testing.
    期間: 6:56
    DDR5 TekExpress Software
    User Defined Mode Demo
    Watch as we demonstrate the  “User Defined Acquisition Mode” feature included as part of Tektronix's TekExpress DDR5 and LPDDR5 testing solution. With the User-Defined Acquisition Mode, or UDA, a …
    期間: 04:46
    Addressing Test Challenges of LPDDR5X Memory
    Explore testing LPDDR5X, the latest low power memory specification from JEDEC. See what's new and what's the same in the latest spec.  You'll also see how Tektronix is addressing LPDDR5X test …
    期間: 23:49
    PCI Express Gen 5 Update Webinar
    Cloud-based computing power, storage capacity, and network bandwidth have led to the development of the PCI Express 5.0 specification for 32.0 GT/s. This webinar starts with an overview of 5.0 …
    期間: 44:47
    Understanding USB4 Version 2.0 and the Challenges of PAM3 Signaling for Physical Layer Testing
    The USB4V2 standard offers higher data transfer speeds, better power delivery, and increased security measures. Learn about testing PAM-3 signals and new measurement methods and tests (both Tx and …
    期間: 30:13
    Addressing New DisplayPort v2.1 Testing Challenges
    The DisplayPort v2.1 (DP2.1) specification and compliance test requires a new approach to testing to reduce increasing test times. Learn about DP2.1, the challenges it brings, and a new solution …
    期間: 15:23
    MIPI D-PHY C-PHY M-PHY
    MIPI C-PHY D-PHY Webinar
    MIPI alliance standards have been driving the adoption of newer features and higher data rates for emerging mobile applications.  Oscilloscope-based protocol layer validation enables isolating …
    期間: 31:33
    Automotive Multigigabit Ethernet Webinar
    Autonomous driving and connected vehicle are driving higher speed in-vehicle networks, such as Automotive Ethernet. This webinar offers insights into the new measurement requirements for the …
    期間: 55:37
    Getting to PCI Express Compliance Faster
    Getting to PCI Express Compliance Faster
    As design margins shrink, accurate and standard-specific measurement is key to debugging, verifying design and performing interoperability testing when designing PCIe devices. Having confidence in …
    期間: 53m 34s
    MIMO and Phased Array RADAR System Testing Using SignalVu Software
    See how SignalVu VSA software offers insight into MIMO and Phased Array RADAR systems at frequencies and bandwidths up to 70 GHz on up to 4 channels. SignalVu VSA software enables a multi-channel …
    期間: 9:41
    FLR Probe Tips for DDR and LPDDR Applications
    Flex Long Reach Solder Down (FLR) Probe Tips from Tektronix have an increased length to provide a longer reach to the target from the probe connection.  A primary use case for these FLR tips is …
    期間: 3:20
    USB4 Receiver Test Solution
    USB4 Receiver Test Solution
    Learn about our USB4 receiver testing solution which offers comprehensive coverage for compliance requirements outlined by the USB Implementers Forum or USB-IF to give you confidence that your …
    期間: 6m 24s
    SignalVu Spectrum Analysis Software
    Hear an overview of SignalVu, Tektronix's RF and vector signal analysis platform. Tektronix' spectrum analyzers and oscilloscopes combined with SignalVu uniquely allows you to view live spectral …
    期間: 00:12:51
    SignalVu MIMO RADAR System Testing
    See how SignalVu VSA software version 5.3 paired with a Tektronix DPO70000SX or MSO/DPO70000DX Series oscilloscope makes an excellent choice for validating a MIMO phased array RADAR because of the …
    期間: 5:28
    High Speed Serial Data Trends
    Trends in High Speed Serial Test and Measurement
    Join Pavel Zivny and David Bouse, Tektronix' Principal Technology Leads for Ethernet and PCI Express respectively, as they discuss developments in 112 Gigabit Ethernet, PCI Express Gen6, PAM4 …
    期間: 6:56
    PCI Express Panel TIF 2022
    Watch as experts from Anritsu, Synopsys, and Tektronix participate in a panel discussion on the evolution of SerDes validation. They also offer an overview of the new tools and measurement …
    期間: 51m 23s
    Long Duration Acquisitions for Jitter Analysis
    For performing jitter analysis, typically the oscilloscope should acquire wave forms at the maximum sample rate.  Learn about the ramifications of having the horizontal acquisition setup for …
    期間: 04:10
    TekExpress DDR Automation Introduction
    Get a high level look at TekExpress DDR Automation Testing Solution for system level testing of DDR5/LPDDR5. We show how to enter device definition, electrical and timing parameters to measure …
    期間: 5:39
    PCIe 6.0 Panel Discussion: Designing for the Future with 64 GT/s and Beyond
    Learn about the latest best practices for PCI Express 6.0 electrical design and validation. Hear experts from Tektronix, Synopsys, and Anritsu discuss key considerations in designing for the …
    期間: 28:37
    What is HSI?
    Watch this demo video to learn how Tektronix High Speed Interface (HSI) can boost performance speed to be much faster than traditional VISA- and SCPI-based waveform data transfer.
    期間: 6m 7s
    Leveraging HSI with Python
    This video discusses the new Tektronix Python libraries - TekHSI and tm_data_types, how to install the new TekHSI Python libraries, some programming examples and how these new libraries compare to …
    期間: 10m 43s
    How to control Tek Scope over LAN
    How to Control a Tektronix Oscilloscope Over a LAN
    Learn how to use the eScope function to remotely control a Tektronix oscilloscope over a network without any special software. This video shows how to find the IP address of the scope and use a …
    期間: 2:14
    Synchronizing Two Scopes to Measure a Motor Drive
    Characterizing 3-phase systems can be tough, since you often need six or more channels - three inputs per phase for both Voltage and Current signals. This video demonstrates how multiple 4 Series …
    期間: 3m 29s
    Smitty Grubbs Case Study
    期間: 5m 23s
    PAM4 Debug and Validation on Real-Time Oscilloscopes
    PAM4 Debug and Validation on Real-Time Oscilloscopes
    Overview of system with DPO70000SX system for both electrical and optical PAM4 solutions.
    期間: 2m 16s
    400G-ZR Test Solutions
    400G-ZR Test Solutions
    Overview of the Tektronix 400G-ZR Coherent Optical Modulation Analyzer.
    期間: 3m 19s
    2 Series MSO Mixed Signal Oscilloscope - Accessories
    2 Series MSO Mixed Signal Oscilloscope - Accessories
    This video provides an overview of the standard and optional accessories for the 2 Series MSO, including battery pack, VESA mount, rack mount kit, and protective case, as well as the variety of …
    期間: 1m 19s
    How to Measure Converter and Inverter Power Efficiency
    How to Measure Converter and Inverter Power Efficiency
    Testing power quality is a critical part of any power design process. In this video, our Tektronix expert shares tips and tricks for using an oscilloscopes or power analyzer during design and …
    期間: 2:55
    How to Measure Switching and Magnetic Losses
    How to Measure Switching and Magnetic Losses
    This video looks at how to minimize power losses at the component level and optimize the overall efficiency of a power system. The primary causes of power loss in a power system are the power …
    期間: 1m 51s
    Testing Power Electronic Components Converters and Drives
    Testing Power Electronic Components Converters and Drives
    Do you have trouble making accurate current or voltage measurements? Are you able to make repeatable single ended, differential, and common mode measurements? Start making reliable power …
    期間: 1m 25s
    Power Integrity Design and Debug Tools
    Power Integrity Design and Debug Tools
    Explore a collection of test and measurement tools chosen by Tektronix experts perfect for engineers working on power integrity. From measuring ripple on DC power rails to seeing noise on your …
    期間: 1m 26s
    PCIe Gen6 PAM4 Signaling
    PCIe Gen 6 PAM4 Signaling
    Prepare for the next PCI Express inflection point by viewing this discussion of validation requirements for PCI Express Gen6.  We review newly introduced transmitter measurements including SNDR …
    期間: 61:49
    TekScope 2.12 - What's New
    TekScope v2.12 includes a built-in screenshot capture feature, HSI enhancements supporting 2.5Gbps USB to ethernet adapters, digital power management, protocol decodes and more.  Watch this short …
    期間: 2m 22s
    Thunderbolt Automation Demo
    Watch to view an introduction to TeKExpress Thunderbolt, our automation solution for Thunderbolt transmitter testing for Thunderbolt 3 and Thunderbolt 4.
    期間: 05:53
    DDR5 Testing
    DDR5 Memory Characterization
    While they promise to provide datacenters with large amounts of data at faster speeds and lower power consumption, DDR5 memory devices have unique test challenges.  Learn about characterization …
    期間: 17:55
    112 Gb-per-sec Ethernet
    112 Gb/s Ethernet Demonstration with Synopsys Transmitter PHY
    With the approaching ratification of 802.3ck, electrical characterization needs are particularly increasing. This demo highlights next-generation testing for end-to-end characterization of a 53 …
    期間: 2:08
    Double Pulse Testing - Energy Loss Measurements
    The switching performance of power semiconductors is often characterized using double pulse tests. This testing is now being widely applied to GaN and SiC MOSFETs. This video explains how to use …
    期間: 7 minutes
    Electric Vehicle Charging - What's Ahead?
    With electric vehicles (EVs) increasingly becoming mainstream, the industry must create a convenient and reliable EV charging network to ensure driving adoption. Watch as we discuss what's coming …
    期間: 26:18
    Time Domain Reflectometry Measurements and Analysis with 4, 5 and 6 Series MSO Oscilloscopes
    This video demonstrates Time Domain Reflectometry (TDR) measurements using a 6 Series MSO oscilloscope.  (TDR measurements are also available on 4 and 5 Series MSOs.) Having TDR measurements on …
    期間: 7
    Work and collaborate almost anywhere with the 5 Series B MSO
    Work and collaborate almost anywhere with the 5 Series B MSO
    Control your oscilloscope and analyze your measurements at home.  Learn how to connect to a 5 Series B MSO remotely, save measurements, and analyze waveforms on your PC.   Note: A 5 Series MSO is …
    期間: 04:32
    Exploring the Integrated Arbitrary Function Generator - 2, 4, 5, 6 Series MSOs
    Having an arbitrary/function generator built into your oscilloscope is useful and convenient. Learn about the AFG outputs available in 2, 4, 5 and 6 Series MSOs.
    期間: 4m 56s
    Logic and Mixed Signal Analysis
    Built-in logic analysis on mixed signal oscilloscopes expand visibility into digital systems. This video gives a quick overview of the logic probe, settings, triggering and searches.
    期間: 3m 4s
    Advanced Power Supply Measurements and Analysis with Tektronix Oscilloscopes
    Learn how the Advanced Power Supply Measurements and Analysis package for Tektronix oscilloscopes simplifies analysis of power conversion systems with automated power quality, harmonics, switching …
    期間: 7m 46s
    Oscilloscope Measurements on 3 Phase PWM Systems
    Making measurements on the PWM outputs of inverters and motor drives is challenging. Learn about automated 3-phase power measurement packages on 4, 5 and 6 Series B MSO oscilloscopes that deliver …
    期間: 7m 26s
    SPI Bus Decoding and Triggering
    This video covers the basics of SPI bus decoding on Tektronix oscilloscopes as well as the setups for decoding, triggering and searching for specific values or conditions.
    期間: 5m 18s
    I2C Bus Decoding and Triggering
    This video covers the basics of I2C bus decoding on Tektronix oscilloscopes as well as the setups for decoding, triggering and searching for specific values or conditions.
    期間: 5m 12s
    RF Analysis on 4_5_6 Series MSOs
    Overview of RF Analysis on Tektronix 4, 5 and 6 Series Mixed Signal Oscilloscopes
    Learn about the many types of RF analysis available on the 4, 5 and 6 Series MSOs, enabled by the patented integrated digital downconverters behind each channel. This overview touches on …
    期間: 1:51
    Test Automation through Scripting with Python
    Watch this video to see how Python scripting can be used together with an 2 Series MSO oscilloscope and 2400 Graphical Series SMU instrument to automate testing, increasing quality, driving …
    期間: 0:38
    Decoding Near Field Communications (NFC) on 4, 5 and 6 Series MSOs
    How to use Tektronix 4, 5 and 6 Series MSO oscilloscopes to decode and analyze Near Field Communications (NFC) wirelessly, using a near field probe and the RFNFC package on the instrument.
    期間: 6:02
    PCIe Gen6 Receiver Link Training
    Witness the world's first PCIe Gen6 receiver link training test, exhibited by Anritsu at the June 2023 PCI-SIG Developer’s Conference and featuring the Anritsu MP1900A BERT, Tektronix DPO70000SX …
    期間: 01:59
    PCI Express Gen6 Rx Demo
    PCI Express 6.0 Receiver Test Demonstration on Synopsys PHY
    See our demonstration of new PCIe® 6.0 Rx measurement methodologies on the state-of-art Synopsys® PHY and a discussion of techniques for solving new multilevel validation challenges.  The January …
    期間: 2:25
    PCIe Beyond Gen6
    View what’s beyond PCIe Gen6 with this 128 GT/s system, a joint showcase created by Tektronix and Synopsys at the June 2023 PCI-SIG Developer’s Conference. Synopsys’ Madhumita Sanyal, Sr. Staff …
    期間: 01:16
    6G-Networks
    6G Network Research
    See how a team at Wuppertal University in Germany is developing innovative new technologies that will underpin 6G networks. The team is relying on fast, synchronously running instruments as well …
    期間: 5:44
    2 Series MSO - Frequency Response Analysis
    What if you need to see the gain and phase of your circuit over a set of frequencies?  Watch this short video to see how easy it is to carry out frequency response analysis and create your own …
    期間: 2m 10s
    How to Setup VNC for 2 Series MSO Remote Operation
    How to Setup VNC for 2 Series MSO Remote Operation
    Watch this short video to see how easy it is to use the 2 Series MSO Mixed Signal Oscilloscope for remote operation via its VNC server.
    期間: 3m 49s
    Room to Grow
    Room to Grow
    Tackle today's high-speed serial signals and tomorrow's too with the scalable, flexible DPO70000SX series. Watch this short video to see how.
    期間: 2m 5s
    Conquering Wideband Radar
    Conquering Wideband Radar
    Are you trying to build high fidelity wideband signal environments? Are you struggling to pick up on notoriously difficult to detect wideband signals? This webinar will focus on the challenges …
    期間: 1h 2m 35s
    PCIe Gen5 Webinar
    PCI Express Gen 5 Reference Clock Webinar
    This webinar presents an overview of reference clock jitter requirements as they have evolved and offers techniques for making these low femtosecond measurements using a real time oscilloscope. 
    期間: 53:02
    Troubleshooting in the Fast Lane
    Watch our review of the physical layer specification as well as compliance test and troubleshooting of the new IEEE 802.3ck Ethernet standard, with particular focus on the AUI interfaces test. The …
    期間: 41:09
    PCIe Gen5 Rx Calibration
    PCIe Gen5 Rx Calibration
    Listen as Joey Chiu, Tektronix PCI Express Applications Engineer, discusses PCI Express Gen5 Receiver (Rx) calibration. He covers how to prepare for it, what to expect, troubleshooting, and how to …
    期間: 23:15
    PCI Express Gen6 Tx Demo
    PCI Express 6.0 Transmitter Test Demonstration on Synopsys PHY
    See our demonstration of new PCIe® 6.0 Tx measurement methodologies on the state-of-art Synopsys® PHY and a discussion of techniques for solving new multilevel validation challenges.  The January …
    期間: 2:12
    PCIe Gen5 to Gen6 and Comparison to Electrical Ethernet
    Watch as David Bouse explains the evolution of PCI Express from Gen5 to Gen6. Then hear from Pavel Zivny as he and David discuss PAM4 signaling in PCIe and how it compares with PAM4 as applied in …
    期間: 1:00:00
    DDR5 Test Webinar
    DDR5 Test Challenges Webinar
    Learn how you can address five of the thorniest measurement challenges associated with the new DDR5 standard. Get an update on the DDR5 Rx/Tx compliance test and insight in the latest …
    期間: 56:20
    LPDDR5 Automation Software Demo Video
    Watch as the TekExpress DDR Tx Automation Software Solution for LPDDR5  is set up to match the hardware configuration for burst detection of a Device Under Test (DUT) and reporting of results.
    期間: 07:45
    PCI Express Gen 5 Stressed Eye Cal Demo
    Watch PCIe Gen 5 Receiver Automated Test Solution and the CEM test application. The specification requires the stressed eye calibration to be carried out over an optimum channel and other adjusted …
    期間: 05:01
    PCIe Gen6 SerDes Webinar
    Watch our webinar on the latest Rev 1.0 requirements for validation of a 6.0 capable SerDes design including SNDR and RLM measurements of transmitters and stressed eye calibration for receiver …
    期間: 56:53
    PCI Express Gen 5 Receiver Test Webinar
    Watch the webinar, PCI Express Gen 5: Solving 32 GT/s Receiver Compliance and Validation Challenges, to hear Tektronix’ David Bouse and Antritsu’s Hiroshi Saito offer insights into receiver …
    期間: 52:15
    Webinar: High Volume Optical Transceiver Validation
    Learn about the current challenges in testing optical transceivers in a high volume manufacturing setting, and see a demonstration of a transceiver test system for PAM4 characterization using the …
    期間: 34:04
    2 Series MSO - Digital Channels
    2 Series MSO - Digital Channels
    If you tend to look at a lot of digital signals but don't want to lose analog channels, then why not check out how easy the 16 digital channels are to use! See more today by adding them to your 2 …
    期間: 1m 50s
    2 Series MSO - Digital Pattern Generator
    2 Series MSO - Digital Pattern Generator
    Serial data is everywhere in modern embedded circuits. What if you need to create a serial data stream but don't have a separate pattern generator? Not to worry - the 2 Series has one built-in …
    期間: 2m 5s
    Impedance Mismatch
    Resolving Impedance Mismatch
    Watch this video to learn more about impedance mismatch, which can cause the voltage that is displaying on the oscilloscope to be different than on the AFG.
    期間: 3m 45s
    How to Setup Raspberry Pi to Remotely Control the 2 Series MSO
    How to Setup Raspberry Pi to Remotely Control the 2 Series MSO
    Watch this short video to see how to use the Raspberry Pi as a remote control PC for test automation with the Tektronix 2 Series MSO Mixed Signal Oscilloscope and Python language.
    期間: 3m 50s
    PAM4 Electrical
    PAM4 Electrical
    The accelerated development of 400G Ethernet technology is driving new requirements through the test community as it relates to measuring electrical PAM4 systems. This presentation will review …
    期間: 1h 12s
    ECOC 2022 IEEE 802.3ck Solution
    Watch Tektronix’ Pavel Zivny and Ali Emsia at the ECOC 2022 Ethernet Alliance booth as they discuss an 800G link based on an IEEE 802.3ck 100G per lane standard and measured by the Tektronix …
    期間: 2:04
    Low amplitude RF emission analysis with RF vs Time Triggering
    Low amplitude RF emission analysis with RF vs Time Triggering
    See how the RF vs Time hardware triggering capability (Spectrum View) on the 4, 5, and 6 Series MSO oscilloscopes can capture a low amplitude RF emission.  This video focuses on the low amplitude …
    期間: 4:23
    Latency Measurement: CAN to Ethernet
    Webinar: Automotive Wired and Wireless & RF Communication
    Learn about the domain/zonal controllers and discuss what changes it will bring for in-vehicle network architectures, highlighting some of the testing challenges measurement requirements. 
    期間: 57:08
    Mixed Domain Analysis
    Spectrum View for Mixed Domain Analysis
    The 4, 5 and 6 Series MSO Oscilloscopes employ dedicated digital downconverters on all channels that operate independently of time-domain sample rate and record length and enables their Spectrum …
    期間: 29:31
    tekscope 1-44 - whats new
    TekScope V1.44 - What's New
    Watch this video learn about the new features in TekScope version 1.44, including RF analysis capabilities, added support for the MSO2000 and MSO2000B oscilloscopes, user interface improvements …
    期間: 8m 8s
    The Team Behind the 2 Series MSO
    The Team Behind the 2 Series MSO
    How did our engineers manage to fit the capability of a full-functioning scope into such a small form factor? Watch and listen as our engineers talk about their experience delivering the NEW 2 …
    期間: 5m 48s
    How to Get the Most Out of Your Touchscreen Oscilloscope
    Touchscreen oscilloscopes are making their way into labs, workshops and classrooms. While their intuitive interfaces makes setting up and making measurements easier than ever, an understanding of …
    期間: 39m 10s
    USB 31 Rx Testing Features Updates
    USB 31 Rx Testing Features Updates
    This video highlights some of the newest features and capabilities of the USB 3.1 Receiver testing application. These updates enhance the functionality of the software, and give users more tools …
    期間: 5m 25s
    USB 31 Rx Margin Test
    USB 31 Rx Margin Test
    The USB 3.1 Receiver application's Margin Test feature gives engineers quantitative answers on a design's performance and as a debug tool, a better understanding of where devices fail. This video …
    期間: 3m 34s
    USB 31 Rx Link Training Status State Machine
    USB 31 Rx Link Training Status State Machine
    This video focuses on the Link Training Status State Machine UI feature of the USB 3.1 Gen2 Receiver test application and shows the path that is taken by a device being trained into loopback mode …
    期間: 4m 35s
    USB 31 Rx Calibration and Testing Setup
    USB 31 Rx Calibration and Testing Setup
    The physical setup for USB 3.1 receiver calibration and testing is shown in this video.
    期間: 4m 33s
    Triggering on an ASK Amplitude Shift-Keying Signal with Spectrum View
    Triggering on an ASK (Amplitude Shift-Keying) Signal with Spectrum View
    Watch this short demo of RF vs Time hardware trigger to see how an ASK (Amplitude Shift-Keying) signal changes over time.  The Spectrum View capability on the 4, 5 and 6 Series MSO oscilloscopes …
    期間: 3:16
    Spread Spectrum Clock Analysis With RF vs Time Triggering
    Spread Spectrum Clock Analysis With RF vs Time Triggering
    See how to stabilize a hardware trigger on the up-down chirp pattern of a spread spectrum clock using a Frequency Deviation vs. Time trigger.  The Spectrum View capability on the 4, 5 and 6 Series …
    期間: 2:14
    Optical Probing and Measurements with a Real-time Oscilloscope
    Optical Probing and Measurements with a Real-time Oscilloscope
    Prepare for the new challenges in optical networking. During this webinar, experts will address critical design issues posed by integrating optical PAM4 capabilities into optical networking …
    期間: 48m 56s
    Finding root cause of EMI signals with Spectrum View
    Finding root cause of EMI signals with Spectrum View
    See how to track down the source of transient RF/EMI emissions with Spectrum View and the RF vs Time triggering capabilities. Clearly determine which PCB signals are causing EMI emissions so that …
    期間: 4:21
    Capturing a Clock Frequency Glitch With RF vs Time Trigger
    See how an edge trigger on the RF Frequency Deviation vs Time trace isolates and captures a short duration transient in the frequency of a clock signal.  The Spectrum View capability on the 4, 5 …
    期間: 1:55
    Advanced Power Measurements with Tektronix Oscilloscopes and Picotest Accessories
    Advanced Power Measurements with Tektronix Oscilloscopes and Picotest Accessories
    This Picotest video gives a quick overview of the many power-related measurements that can be made using a Tektronix oscilloscope and Picotest accessories. Advanced power supply tests, such as …
    期間: 1m 49s
    DPO70000SX Oscilloscope Performance Video Series Wideband RF
    DPO70000SX Oscilloscope Performance Video Series Wideband RF
    This video shows the strength of the DPO70000SX Oscilloscope for Wideband RF measurements with great noise density and low EVM measurements. See the performance of the DPO70000SX for yourself!
    期間: 2m 16s
    DPO70000SX Oscilloscope Performance Video Series Jitter Noise Floor
    DPO70000SX Oscilloscope Performance Video Series Jitter Noise Floor
    The DPO70000SX Oscilloscope has very good jitter noise floor. This is important when making critical timing margin measurements on fast devices or silicon. In this video we will see what the Time …
    期間: 1m 50s
    100G Link Training Tool for Debugging Datacenter Technologies
    100G Link Training Tool for Debugging Datacenter Technologies
    Watch this video to get an overview of the new Link Training Tool, which forms part of the expanded analysis software for Tektronix DPO70000SX oscilloscopes. Link Training helps engineers to …
    期間: 1m 31s
    Tektronix Innovation Breakthrough Asynchronous Time Interleaving
    Tektronix Innovation Breakthrough Asynchronous Time Interleaving
    See the latest example of Tektronix history of innovation with this informative video as CTO Kevin Ilcisin discusses the expected benefits of newly patented Asynchronous Time Interleaving being …
    期間: 4m 56s
    From Probe to Pixel
    From Probe to Pixel
    End to end measurement solutions from Tektronix enable researchers and designers to comprehensively and swiftly analyze, debug and test cutting-edge technology with greater speed and precision …
    期間: 1m 21s
    2016 OFC Exhibit Overview
    2016 OFC Exhibit Overview
    Get an overview of the optical solutions available from Tektronix. Learn about what we showcased at our OFC 2016 exhibit, then learn more about these solutions online.
    期間: 1m 16s
    ECOC 2016 THz Communications Using Photonics
    ECOC 2016 THz Communications Using Photonics
    This demonstration of THz wireless transmissions is in collaboration with research professors from the Institute of Electronics, Microelectronics and Nanotechnology in France, who are performing …
    期間: 2m 58s
    6G_MIMO_Research
    6G MIMO Research
    Prof. Dr. Ullrich Pfeiffer of Wuppertal University explains why his team chose Tektronix for their 6G research into making possible increased data rates using multiple channels and balancing speed …
    期間: 0:58
    Whats new in SAS14 and SATA Test Solutions Webinar
    Whats new in SAS14 and SATA Test Solutions Webinar
    Description: Learn what's new in SAS1-4 and SATA testing. You'll gain an understanding of the latest SAS and SATA versions, and their implications for both transmitter and receiver testing.
    期間: 52m 25s
    Understanding Differences between PCI Express 4050 and IEEE High Speed Electrical Specifications
    Understanding Differences between PCI Express 4050 and IEEE High Speed Electrical Specifications
    Our Tektronix domain experts, Dan Froelich and Pavel Zivny, contrast the methodologies of the PCI Express 4.0/5.0 and IEEE 26 GBd NRZ/PAM4 electrical specifications and engage in a lively …
    期間: 1h 1m 36s
    PCI Express Gen4 Gen5 Tx Rx Test
    PCI Express Gen 4 and Gen 5 Transmitter and Receiver Validation
    PCI Express I/O bandwidth has doubled every 3 years on average thereby leading to an increased demand for this full duplex high speed bus architecture. As the industry begins deploying the 5.0 …
    期間: 50:45
    TSOVu for PAM4 Measurement
    Webinar: PAM4 Optical Transceiver Characterization
    Watch as we discuss PAM4 optical transceivers, both 100G and 400G, including the latest on standards, testing, and characterization. We cover high throughput NRZ measurement and margin and compare …
    期間: 1:00:07
    PAM4 Electrical Webinar
    PAM4 Electrical Webinar
    The accelerated development of 400G Ethernet technology is driving new requirements through the test community as it relates to measuring electrical PAM4 systems. This presentation will review …
    期間: 1h 12s
    NBASET and IEEE8023bz Technology and Measurements
    NBASET and IEEE8023bz Technology and Measurements
    The rapid growth of ever-more powerful mobile devices, and the adoption of new wireless technologies such as 802.11ac, has enterprise networks struggling to keep pace. To meet these rising …
    期間: 27m 16s
    Navigating the Road to WiGig
    Navigating the Road to WiGig
    This webinar features Tektronix expert, Dorine Gurney, sharing her insights on the key factors to consider when performing transmitter testing to IEEE 802.11ad. Topics covered include:• What are …
    期間: 24m 54s
    HDMI 2.1 Test Setup
    HDMI 2.1 Test Challenges
    HDMI specification version 2.1 is the most recent update of the HDMI standards and supports a range of higher video resolutions and refresh rates, including 8K60 and 4K120. Watch this …
    期間: 21:02
    Efficiently Design and Electrically Validate a DDR4 Interface
    Efficiently Design and Electrically Validate a DDR4 Interface
    This webinar will show how Cadence and Tektronix can enable you with flexible and power efficient DDR4 IP, design and analysis tools used in the office, and lab-based solutions to address the key …
    期間: 1h 5m 20s
    Effective Optical Test Strategies for 400G Optical Standards
    Effective Optical Test Strategies for 400G Optical Standards
    This webinar discusses how designers and test engineers can determine the most effective optical test strategies for 400G Optical Standards. Learn where PAM-2 and PAM-4 fits, PAM-4 specific Mask …
    期間: 36m 10s
    Characterizing Coherent Optical Systems Webinar
    Characterizing Coherent Optical Systems Webinar
    Learn about the coherent modulation being considered for 400G networks, the key building blocks of a coherent test system, how to optimize measurement accuracy and the benefits of customizable …
    期間: 42m 47s
    Addressing PCIe Gen1-5 Test and Debug Challenges with Confidence
    Addressing PCIe Gen1-5 Test and Debug Challenges with Confidence
    Learn how to address the test and measurement challenges posed by PCIE Gen1-5 for both base silicon testing and CEM compliance testing. Gain insights and solutions for automation, validation, and …
    期間: 41m
    400G Networking and 28GBd56GBd Testing Are you Ready
    400G Networking and 28GBd56GBd Testing Are you Ready
    With PAM4 moving into production and 400G design efforts in full swing, the test challenges around characterization, verification and debug, and manufacturing testing have never been greater. This …
    期間: 18m 33s
    WIGIG CASE STUDY
    WIGIG CASE STUDY
    Find out how the Tokyo Metropolitan Industrial Technology Research Institute (TIRI) reduced their testing time of wideband signals like IEEE 802.11ad with the Tektronix DPO70000SX. Previously …
    期間: 3m 43s
    Using the Deskew Tool
    The UltraSync architecture provided with DPO70000SX series oscilloscopes allows you to connect two or more oscilloscopes together to easily add acquisition channels while maintaining channel-to …
    期間: 4:59
    Tips and techniques for setting up your Tektronix 4_5 or 6 Series MSO display
    Tips and techniques for setting up your Tektronix 4 Series, 5 Series or 6 Series MSO display
    Watch how easy it can be to setup and analyze waveform behavior using the highly intuitive touch interface. Setting up your measurement and debugging your system has never been easier with the …
    期間: 1:51
    Practical techniques workshop for Mixed Signal Oscilloscopes
    Tektronix Sr. Applications Engineer Alan Wolke leads a workshop on practical tips and techniques for Mixed Signal Oscilloscopes using the Tektronix 6 Series B MSO. - How to remotely access your …
    期間: 37:32
    How to use Callouts on 4 5 6 Series MSOs
    How to use Callouts on the 4 Series, 5 Series and 6 Series Mixed Signal Oscilloscopes
    Learn how to annotate test results and methods with “Callouts” for easily documenting important information when sharing data across a team, recreating a measurement at a later date, or delivering …
    期間: 1:42
    How to Perform Embedded PCIe Measurements
    How to Perform Embedded PCIe Measurements
    In this video we look at a topic that is becoming increasingly important in the high-speed serial industry—how to perform embedded measurements at the IC or PCB level using probes.
    期間: 4m 14s
    How to change the font size on the 4 Series 5 Series or 6 Series MSO display
    How to change the font size on the 4 Series, 5 Series or 6 Series MSO display
    Watch how to easily change the font size used on your 4/5/6 Series MSO with just a few clicks. This will make it easier to read measurement values at a distance from your scope or maximize the …
    期間: 1:27
    DPO70000SX Oscilloscope Performance Video Series Spurious-Free Dynamic Range
    DPO70000SX Oscilloscope Performance Video Series Spurious-Free Dynamic Range
    This video shows the spurious-free dynamic range on the DPO70000SX Oscilloscope. Illustrated is how the scope’s dynamic range is performing using 40GHz tones sent into the instrument on a 5GHz …
    期間: 2m 37s
    DPO70000SX Oscilloscope Performance Video Series Improving Measurement Accuracy with External Attenu
    DPO70000SX Oscilloscope Performance Video Series Improving Measurement Accuracy with External Attenu
    This video highlights the benefits, and proper use, of external attenuation with the 70GHz DPO70000SX Series Oscilloscope. See how measurement signal fidelity can be improved with easy-to-use …
    期間: 4m 27s
    Analyzing turn on behavior of a spread spectrum clock with Spectrum View on 4_5_6 Series
    Analyzing turn on behavior of a spread spectrum clock with Spectrum View on 4, 5 and 6 Series
    See how Spectrum View provides ease-of-use and the ability to achieve optimal views in both RF and Time domains simultaneously when analyzing the turn on behavior of a spread spectrum clock.  This …
    期間: 2:32
    Analyzing Frequency Response with a 2 Series MSO and AFG31000
    Analyzing Frequency Response with a 2 Series MSO and AFG31000
    This video demonstrates how to analyze the frequency response of an inverting amplifier circuit using Keithley KickStart Software, a Keithley 2220-30-1 Dual-Channel Power Supply, a Tektronix …
    期間: 5m 39s
    2 Series MSO - Remote Control VNC
    2 Series MSO - Remote Control VNC
    Want to remote control your oscilloscope from another room, city or even country?  The 2 Series MSO has a built-in VNC server that is fluid and convenient. Watch how easy it is to setup in under a …
    期間: 1m 12s
    2 Series MSO - Stacked vs Overlay Mode
    2 Series MSO - Stacked vs. Overlay Mode
    Having multiple traces on the same screen can take time to accurately setup.  See how the 2 Series MSO makes use of its 'Stacked' mode to not only saves time setting up each trace, but also allows …
    期間: 1m 29s
    2 Series MSO - Mask Testing
    2 Series MSO - Mask Testing
    Wondering if your signal is within a certain tolerance?  Take a look at the mask testing feature of the 2 Series MSO, and see how easy and effective it is to setup.
    期間: 1m 14s
    2 Series MSO - i2C Serial Decode
    2 Series MSO - i2C Serial Decode
    Decoding serial data need not be difficult.  See how simple, fast and accurate it is to decode this common serial data standard with the intuitive user interface of the 2 Series MSO.
    期間: 1m 5s
    2 Series MSO - Top 5 Reasons You Need One
    2 Series MSO - Top 5 Reasons You Need One
    While there are many reasons why you should buy the new 2 Series MSO from Tektronix, check out our top 5 reasons why you need one!
    期間: 1m 18s
    2 Series MSO - Search Functionality
    2 Series MSO - Search Functionality
    Serial data debug is a common job to be done.  What if you needed to search through a data stream?  The 2 Series MSO can do this for you.  Watch how easy and fast you can do this on an I2C data …
    期間: 1m 10s
    2 Series MSO - RS232
    2 Series MSO - RS232
    Serial data is everywhere in modern embedded circuits, and, while this mature bus isn't as prevalent as it once was, there is still plenty of usage. See how easy it is to decode it into ASCII with …
    期間: 1m 5s
    2 Series MSO - Runt Trigger
    2 Series MSO - Runt Trigger
    Advanced triggering is a must for any modern oscilloscope.  Changing trigger modes on the 2 Series MSO is just a few taps of the screen.  Take a look at the highly useful runt trigger and see how …
    期間: 55s
    2 Series MSO - TekDrive Recall Scope Setup
    2 Series MSO - TekDrive Recall Scope Setup
    Have you ever been asked to setup another user's oscilloscope?  What if that user is not in the same lab?  TekDrive allows the sharing of not just data, but also oscilloscope setup.  Watch how …
    期間: 1m 46s
    2 Series MSO - TekDrive Session Share
    2 Series MSO - TekDrive Session Share
    If you work remotely from your colleagues, sharing data seamlessly is vital.  Watch how TekDrive allows you to share test data with anyone and anywhere, even if the other person doesn't have an …
    期間: 1m 37s
    2 Series MSO - FFT
    2 Series MSO - FFT
    Using an oscilloscope to measure signals in the RF domain can be daunting.  Watch how easy and effective it is to make use of the FFT capability in the 2 Series MSO.
    期間: 1m 11s
    2 Series MSO - Built-in AFG
    2 Series MSO - Built-in AFG
    Having the ability to generate signals into your design is very useful.  Take a look at how easy it is to not just generate standard signals, but also recall custom waveforms with the 2 Series MSO …
    期間: 1m 6s
    2 Series MSO - CAN Decode
    2 Series MSO - CAN Decode
    Decoding CAN differential doesn't always mean you need a differential probe.  See how easy it is to deocde via the maths channel on the 2 Series MSO. 
    期間: 1m 13s
    2 Series MSO - Cursors and Measurements
    2 Series MSO - Cursors & Measurements
    Making accurate measurements on an oscilloscope is vital.  The 2 Series MSO has built-in automated measurements and easy to control cursors that provide confidence in your measurements.
    期間: 1m 34s
    2 Series MSO - Callouts
    2 Series MSO - Callouts
    Watch how easy it is to make notes on the screen & traces of the 2 Series MSO. It's perfect if you are sharing your test results or producing reports on your debug findings.
    期間: 1m 18s
    USB 31 Debugging When Compliance Measurements Fail for TX
    USB 31 Debugging When Compliance Measurements Fail for TX
    This short video shows how to debug a compliance measurement that has failed by using Tektronix’ Jitter and Eye Diagram Software, DPOJET. Using DPOJET, engineers can go from a compliance …
    期間: 4m 36s
    TekScope Datalogging
    TekScope Datalogging
    TekScope PC software, combined with Tektronix oscilloscopes, makes it easy to log waveform data, waveform images and measurements on your PC.  Simply set the logging interval, count, and hit Start …
    期間: 5m 29s
    Multi-Channel Spectrum View
    Using Spectrum View Spectrum Analysis on Multiple Channels (2 of 3)
    For complex troubleshooting, Spectrum View is available on multiple channels.  With all Spectrum Time indicators locked and moving together you can see time correlated spectrums across all …
    期間: 4:56
    SpectrumAndTimeDomain
    Spectrum View Spectrum Analysis and How it Differs from Traditional Oscilloscope FFTs (1 of 3)
    The 4, 5 and 6 Series MSO Oscilloscopes employ dedicated digital downconverters on all channels that operate independently of time-domain sample rate and record length. This enables their Spectrum …
    期間: 3:35
    RF Triggering
    Triggering on RF Frequency Changes with Spectrum View Spectrum Analysis (3 of 3)
    See how Spectrum View's triggering functionality can be used together with the independent control of time and frequency domains to capture infrequent anomalies.  Additional videos: Spectrum View …
    期間: 7:19
    OFC 2017 - PAM4 Debug and Analysis with Real Time Oscilloscope
    OFC 2017 - PAM4 Debug and Analysis with Real Time Oscilloscope
    This video highlights the benefits of using the DPO70000SX real time oscilloscope-based system for 400G optical/electrical PAM-4 debug and analysis.
    期間: 4m 3s
    Beamforming
    MIMO Processing for Beamforming Analysis
    See how the 4, 5, and 6B Series of MSO oscilloscopes provide a platform for multichannel test and measurement of MIMO systems through extension of MATLAB® algorithms for analysis of channel …
    期間: 24:54
    Low Noise Signal Acquisitions Take Center Stage at ECOC 2015
    Low Noise Signal Acquisitions Take Center Stage at ECOC 2015
    John Calvin puts the latest oscilloscope technology to work. The DPO70000SX oscilloscopes allows engineers to capture and measure high-frequency signals more accurately than possible with …
    期間: 3m 24s
    Interoperability is Key
    Interoperability is Key
    At OFC 2018 it’s not just about speed but also interoperability both between standards and among equipment vendors. Here Tek’s Pavel Zivny showcases a demonstration system with a Tektronix DSA8300 …
    期間: 3m 27s
    INDUSTRY BEST RESIDUAL EVM MEASUREMENTS FOR IEEE80211AD TESTING
    INDUSTRY BEST RESIDUAL EVM MEASUREMENTS FOR IEEE80211AD TESTING
    Tektronix introduces the industry’s most accurate and repeatable single box solution for characterizing and debugging IEEE802.11ad transmitter PHY for silicon and systems. In this IEEE802.11 …
    期間: 3m 47s
    Impact of variable Bandwidth on Optical Measurements
    Impact of variable Bandwidth on Optical Measurements
    Finding the right filter settings for your optical TDECQ and NRZ measurements can be a pain on conventional solutions. With the new real-time O to E’s (DPO7OE Series) from Tektronix changing the …
    期間: 1m 54s
    ECOC 2016 Stable triggering on a 32 Gigabaud Signal
    ECOC 2016 Stable triggering on a 32 Gigabaud Signal
    At this ECOC 2016 Demo Station, we're looking at generating a 50+ Gigabaud Optical Signal and also how our DPO70000SX oscilloscope enables a stable trigger on a 32 Gigabaud signal.
    期間: 2m 49s
    ECOC 2016 Optical Communications Up To 80 Gigabaud
    ECOC 2016 Optical Communications Up To 80 Gigabaud
    Learn how new software features of the Tektronix OM4000 series, which enable multiple optical modulation analyzers to be combined, are enabling research into higher fiber optic transmission …
    期間: 3m 2s
    ECOC 2016 400 Gig Test Station
    ECOC 2016 400 Gig Test Station
    Watch a demonstration of the first working version of TDECQ that can operate on a 64 gigabit per second DR4 signal.
    期間: 1m 49s
    DPO7OE Series Optical Probe Overview
    DPO7OE Series Optical Probe Overview
    See the versatility of our high-speed optical-to-electrical converters (DPO7OE1 and DPO7OE2 Optical Probes) for 200G and 400G PAM4 measurements. Multiple high-speed acquisitions of long pattern …
    期間: 3m 41s
    ECOC 2016 PAM4 Software Updates
    ECOC 2016 PAM4 Software Updates
    Find out how new PAM4 software updates including full noise decomposition enable you to ensure your designs comply with the latest changes in compliance standards. 
    期間: 5m 16s
    Clock Recovery for PAM4
    Clock Recovery for PAM4
    In this video you will learn how easy it is to recover a clock on an optical PAM4 signal and display an eye. The DPO7OE1 and DPO7OE2 is the perfect solution for optical high-speed measurement …
    期間: 2m 26s
    5G Validation & System Debug
    5G Validation and System Debug
    Learn how to perform multi-domain signal analysis of 5G base station and user equipment systems.  See the benefits of using a mixed domain oscilloscope for analyzing RF amplifier performance.  …
    期間: 6:47
    Adjacent Channel Power
    5G New Radio Vector Signal Analysis
    Watch to learn how you can simplify several 3GPP 5G New Radio transmitter tests. You’ll see how to verify transmitter characteristics including power, power dynamics, signal quality and RF …
    期間: 8:50
    400G Coherent Optical Demo
    400G Coherent Optical Demo
    Take a look at Tektronix complete 400G coherent optical test system recently on display at OFC. It includes next generation signal generation, modulation, acquisition, and analysis.
    期間: 5m 31s
    100G-400G PAM4
    100G-400G PAM4
    See 100G/400G Real-Time and Equivalent Time oscilloscope solutions that enable seamless transition across your workflow. From product R&D and debug to design validation and production test – see …
    期間: 3m 38s
    NEXT GEN TEK
    NEXT GEN TEK
    Get ready to change the way you work - forever - with NEXT GEN TEK.  Watch this short video about the 2 Series MSO Mixed Signal Oscilloscope.
    期間: 30s
    2 Series MSO - Stand Configurations and Options
    2 Series MSO - Stand Configurations and Options
    Watch this short video to see the different configurations for mounting the 2 Series MSO on its stand, the stability provided by the elastomer base, and the options for mounting the unit on a …
    期間: 4m 34s
    2 Series MSO Reveal at Oregon State University
    2 Series MSO Reveal at Oregon State University
    Watch the reactions and hear the comments of Oregon State University students as they see and have the opportunity to use the 2 Series MSO Mixed Signal Oscilloscope for the very first time.
    期間: 2m 31s
    6 Series MSO Channel-to-Channel Phase Measurements
    Channel-to-channel Phase Measurements using a 4, 5 or 6 Series MSO
    This quick demonstration shows in real-time how phase relationships change based on the relative position of antennas. The phase-coherent digital downconverters (DDCs) in a 6 Series MSO …
    期間: 2:09
    TekScope Version 1-40 - Whats New
    TekScope Version 1.40 - What's New?
    Watch this video to learn about the new features in TekScope version 1.40, including continuous acquisition, license expiration notification, and IMDA-MECH and WBG-DPT in the pro automotive and …
    期間: 7m 19s
聯絡技術支援 索取零件 支援
Looking for a Manual for very old Tektronix product? View this link : Find legacy Manuals