연락처

텍트로닉스 담당자와 실시간 상담 6:00am-4:30pm PST에 이용 가능

전화

전화 문의

9:00am-6:00PM KST에 이용 가능

다운로드

매뉴얼, 데이터 시트, 소프트웨어 등을 다운로드할 수 있습니다.

다운로드 유형
모델 또는 키워드

피드백

제품 지원 및 다운로드

텍트로닉스 제품 지원 센터

'텍크놀로지(Tek-nology)'를 개발하는 일은 행복하지만, 동시에 매우 바쁘다는 걸 알고 있습니다. 이에. 텍트로닉스는 현재 출시되는 모든 제품과 단종된 여러 제품에 대한 설명서와 데이터 시트, 소프트웨어를 쉽게 다운로드할 수 있도록 제품 지원 센터를 만들었습니다. 사용 중인 제품명을 입력해 주시기만 하면 텍스로닉스가 보유하고 있는 모든 정보를 알려 드리겠습니다.

선택한 제품 모델은 현재 구입할 수 있으며, 다음 지원 정보도 제공됩니다.

  • FAQ FAQ ID
    Compatibility of the P5200A Probe with the TDS2001C Oscilloscope
    Question: Can the P5200A High Voltage Differential Probe directly connect to the TDS2001C?   Answer: Yes, the P5200A probe is compatible with the TDS2001C.                  P5200A probe connects to a 1M BNC input instrument and must be ground …
    KB-01078
    P5200A vs P5200- does the Attenuation setting save?
    Question: P5200 (nonletter) probe has a mechanical range selection switch but P5200A has a different switch. If the power is removed from the probe, does the probe maintain the last selected range (50X or 500X) on it's next power-up? Answer: NO- it …
    KB-03993
  • 줌 기능을 사용하면 신호의 특정 부분을 더 자세히 살펴볼 수 있어 작은 세부 사항을 쉽게 확인할 수 있습니다.  먼저, 화면 오른쪽 상단에 표시된 Zoom(확대/축소) 아이콘을 누르십시오. 버튼이 보이지 않는 경우, 세로 점 3개를 눌러 사이드바를 열어 보십시오.   Zoom(확대/축소) 버튼이 강조 표시되어 있는 상태에서 파형 위로 상자를 끌면 …
    기간: 43초
    시리얼 버스 디코드는 파형과 디코딩된 데이터를 같은 화면에 표시하여 프로토콜 문제를 신속하게 디버그하는 데 도움이 됩니다. 1 시리즈 DPO는 RS-232(UART), I2C, 3-Wire SPI를 지원합니다.  SPI(시리얼 주변기기 인터페이스)에는 데이터 입력(MOSI), 데이터 출력(MISO), 클록, 칩 선택의 네 가지 신호가 있습니다 …
    기간: 1분 28초
    시리얼 버스 디코드는 파형과 디코딩된 데이터를 동일한 화면에 표시하여 프로토콜 문제를 신속하게 디버그할 수 있도록 지원합니다. 1 시리즈 DPO는 RS-232(UART), I2C, 3-Wire SPI를 지원합니다.  I2C(I-squared-C)는 SDA(데이터)와 SCL(클럭)의 두 신호를 사용합니다. 버스를 구성하려면 Math/Ref/Bus …
    기간: 1분 46초
    시리얼 버스 디코드는 파형과 디코딩된 데이터를 동일한 화면에 표시하여 프로토콜 문제를 신속하게 디버그할 수 있도록 지원합니다. 1 시리즈 DPO는 RS-232(UART), I2C, 3-Wire SPI를 지원합니다.  RS-232 또는 UART는 TX(송신) 및 RX(수신)라는 두 가지 신호를 사용합니다. 버스를 구성하려면 Math/Ref/Bus …
    기간: 1분 58초
    보드 플롯은 장치의 주파수 응답을 보여줍니다. 이 측정은 주파수 응답 분석(FRA)이라고 합니다. AFG 출력은 회로 입력에 연결되고, 채널 1은 Vin을, 채널 2는 Vout을 모니터링합니다. 보드 플롯을 생성하려면 스윕 범위가 필요합니다. 이 예시는 100Hz에서 5MHz까지의 스윕을 보여줍니다. 완료되면 그래프에서 커서를 사용하여 이득 및 위상 …
    기간: 2분 7초
    1 시리즈 DPO의 내장 임의 함수 발생기(AFG)를 사용하면 하나의 계측기로 신호를 빠르게 생성하고 확인할 수 있습니다. 이 옵션 기능은 장비 후면에 AFG라고 표시된 BNC 커넥터가 있는 1 시리즈 DPO S 모델에서 사용할 수 있습니다.  DVM/AFG 버튼을 누르면 사인파, 구형파 및 삼각파와 같은 다양한 파형 유형을 선택할 수 있습니다 …
    기간: 1분 25초
    오실로스코프의 XY 모드는 두 신호 간의 관계를 시각화합니다. 이를 활성화하려면 수평 배지를 두 번 탭한 다음, 획득 설정을 선택하십시오. 여기에서 채널 1과 2의 XY 플롯을 활성화할 수 있습니다. 이 시연에서는 듀얼 출력 AFG31000을 사용합니다. 진폭이 동일한 약 1MHz의 사인파 두 개를 적용하고 위상 편이를 변경하면 표시되는 파형이 …
    기간: 1분 17초
    한계 테스트에서는 마스크를 사용하여 파형을 알려진 기준값과 비교합니다. 이는 통과/실패 테스트의 한 형태이기도 합니다.  시작하려면 화면 오른쪽 상단의 More... 버튼을 누르십시오. 버튼이 보이지 않는 경우, 세로 점 세 개를 탭하여 사이드바를 열어 보십시오. 그런 다음 마스크를 탭하십시오. 오실로스코프가 채널 1 주위에 초기 마스크를 …
    기간: 1분 9초
    자동 측정을 사용하면 수동 계산 없이 빠르게 정확한 결과를 얻을 수 있습니다. 시작하려면 화면 오른쪽 상단의 Meas... 버튼을 누르십시오. 버튼이 보이지 않는 경우, 세로 점 3개를 눌러 사이드바를 열어 보십시오.  Measurements(측정) 메뉴에서 다양한 진폭 및 시간 기반 측정을 선택하십시오. Source(신호원)가 활성 …
    기간: 1분 5초
    FFT(고속 푸리에 변환)를 사용하면 신호를 구성하는 주파수 성분을 확인할 수 있습니다. 이는 기존 시간 영역 보기에서는 명확하게 드러나지 않을 수 있는 노이즈, 고조파, 전반적인 신호 동작을 식별하는 데 중요합니다.  FFT를 사용하려면 먼저 신호의 여러 주기가 보이도록 시간 스케일을 조정합니다. 다음으로 Math/Ref/Bus 버튼을 누르고 …
    기간: 1분 13초
    신호를 결합하고 비교하게 해 주는 연산 기능으로 파형 간 상호 작용을 더 쉽게 이해하고 화면에서 직접 신속하게 분석할 수 있습니다. 연산 기능을 사용하려면 화면의 Math/Ref/Bus 버튼을 누른 다음 연산 파형을 선택하십시오. 그런 다음 덧셈과 같은 연산을 선택하여 소스 1과 소스 2를 선택하십시오. 연산 배지를 두 번 탭하거나 연산 배지를 …
    기간: 57초
    1 시리즈 DPO는 필수 기능은 물론 그 이상의 기능까지 갖춘 소형 오실로스코프입니다.  기술 개요를 시청하여 이 스코프의 매력적인 장점을 확인하십시오.  직관적인 터치스크린 UI, 화면 커서, 자동 측정, eScope와 같은 기능을 통해 학습, 측정 및 공유가 얼마나 쉬워지는지 알아보십시오. 1 시리즈 DPO에 대한 추가 정보는 제품 …
    기간: 6분 51초
    오실로스코프 측정을 수행하기 전에 프로브를 올바르게 보정하는 것이 중요합니다.  프로브 보정은 정확한 측정을 위해 10x 패시브 프로브를 오실로스코프의 입력 정전 용량에 맞춥니다. 이것이 없으면 파형이 왜곡되고 오프셋을 포함한 오류가 발생할 수 있습니다. 1x 설정에서는 직접적인 1:1 연결이므로 보정이 필요하지 않습니다. 프로브를 …
    기간: 1분 12초
    커서를 사용하면 오실로스코프에서 정확한 측정을 신속하게 수행하고 스크린샷을 기록할 수 있습니다. Curs... 버튼을 사용하여 활성화하십시오. 터치스크린을 사용하여 파형에서 커서 위치를 지정하거나 범용 노브를 사용하여 더 정밀하게 조정할 수 있습니다. 관심 지점에 커서를 배치하면 주기, 주파수 또는 전압과 같은 차이를 신속하게 측정할 수 …
    기간: 41초
    이 영상을 통해 1 시리즈 DPO에서 스크린샷과 데이터를 얼마나 쉽게 공유할 수 있는지 확인하십시오. USB 또는 이더넷을 통해 PC에 연결하고 SCPI 명령을 사용하여 측정을 자동화하십시오. 측정값을 TekScope PC로 내보내 추가 분석을 수행하십시오. Tektronix 생태계를 통해 측정할 때마다 더 많은 것을 얻으십시오. …
    기간: 36초
    오실로스코프에서 시리얼 디코드가 어떻게 버스 신호를 읽기 쉬운 데이터로 변환하여 프로토콜 디버깅을 간소화하는지 확인해 보십시오. 1 시리즈 디코드는 I²C, SPI, UART 프로토콜을 지원합니다. 1 시리즈 DPO에 대한 추가 정보는 1 시리즈 DPO 제품 페이지를 방문하여 확인해 주십시오.
    기간: 44초
    1 시리즈 DPO에서 측정하는 방법은 3가지가 있습니다. 영상을 시청하여 계수선을 세거나, 커서를 사용하거나, 20개 이상의 자동 측정 기능에 액세스하는 방법을 확인해 보십시오. 진폭, 피크 대 피크, 최소, 최대, 평균 및 RMS는 1 시리즈 DPO에 내장된 자동 측정 기능 중 일부에 불과하며, 이를 통해 결과를 더 빠르고 쉽게 얻을 수 있습니다 …
    기간: 1분 14초
    1 시리즈 DPO는 모든 Tektronix 오실로스코프와 마찬가지로, 배우기 쉽고 사용하기 쉬운 직관적인 터치 기반 사용자 경험을 제공합니다. 이 디자인이 색상을 일치시킨 노브와 화면 배지, 빠른 작업 기능, 간편한 메뉴를 통해 어떻게 학습과 측정을 더 쉽고 효율적으로 만드는지를 확인해 보십시오. 1 시리즈 DPO에 대한 추가 정보는 1 …
    기간: 38초
    필요한 모든 기능이 있는 하나의 소형 기기로 시작해 보십시오. 내장형 아날로그 채널, 옵션 AFG, 주파수 응답 분석기(보드 플롯), 프로토콜 분석기, DVM, 카운터를 갖추어, 작업대 위에서 실험실을 경험할 수 있습니다. 직관적인 터치스크린 UI, 화면 커서, 자동 측정, eScope와 같은 기능을 통해 학습, 측정 및 공유가 얼마나 쉬워지는지 …
    기간: 43초
    소형 계측기 하나로 필요한 성능과 다기능성, 도구를 모두 확보하십시오. 오늘날의 최신 엔지니어링 과제에 대응하도록 설계되어, 작업대 위에서 실험실을 완벽하게 구현합니다. 아날로그 채널  2 또는 4 대역폭  50MHz, 70MHz, 100MHz, 200MHz 샘플링 속도  최대 1.25GS/s 레코드 길이  채널당 10M 샘플 수직 …
    기간: 44초
    This video gives an overview of the 2 Series MSO Mixed Signal Oscilloscope. It includes a brief introduction of key features and specifications, then discusses details about the modern user …
    기간: 16m 3s
    This video provides a short introduction of the key features and specifications of the 2 Series MSO Mixed Signal Oscilloscope.
    기간: 3m 53s
    This video provides an overview of how your global engineering teams can easily collaborate remotely with the 2 Series MSO Mixed Signal Oscilloscope.
    기간: 3m 16s
    This video provides an overview of the touchscreen user interface and simplified controls featured with the 2 Series MSO Mixed Signal Oscilloscope.
    기간: 2m 26s
    This video provides an overview of the integrated arbitrary function generator available with the 2 Series MSO Mixed Signal Oscilloscope.
    기간: 1m 44s
    This video provides an overview of the advanced trigging, search and protocol decode capabilities of the 2 Series MSO Mixed Signal Oscilloscope.
    기간: 2m 30s
    This video provides an overview of the analysis tools offered by 2 Series MSO Mixed Signal Oscilloscope.
    기간: 2m 22s
    An oscilloscope is typically set up to measure voltage versus time. But you can configure the oscilloscope to measure current as well. This video shows two very simple methods of using the …
    기간: 1m 32s
    DDR5 memory pushes the limits of high-speed signaling and tackles the bandwidth challenge imposed by the exponential growth of data generation. See the latest characterization and debug techniques …
    기간: 2:46
    Being able to easily collect waveform data from your oscilloscope is essential when performing a variety of applications. Fortunately, there many options to export data from your TBS2000B and then …
    기간: 1m 56s
    Accurate measurements start with a properly compensated probe. In this short video, we’ll show you how to compensate a passive probe on the Tektronix 2 Series MSO. Just a quick adjustment ensures …
    기간: 1m 9s
    Learn how to set up and fine-tune the horizontal system on your Tektronix 2 Series MSO. We’ll show you how to adjust the timebase using the horizontal scale knob, touchscreen gestures, and manual …
    기간: 1m 35s
    The vertical scale setting on your oscilloscope directly affects signal visibility and measurement accuracy. In this quick tutorial, we show you how to adjust the vertical scale on the Tektronix 2 …
    기간: 1m 36s
    Making measurements on your oscilloscope has never been easier. In this demo, we walk through three common measurement techniques on the Tektronix 2 Series MSO: manual observation, cursor …
    기간: 2m 9s
    Watch this quick video to see how the Tektronix 2 Series MSO lets you view, trigger on, and decode logic signals alongside analog waveforms. We’ll walk you through probe setup, threshold settings …
    기간: 2m 24s
    This short video offers three simple techniques for making oscilloscope measurements to help you get your testing done quickly.
    기간: 1m 17s
    Often, when using an oscilloscope, one needs to make quick on-screen measurements and add notes to waveforms. Cursors can be used to take quick, precise measurements, while callouts can be used to …
    기간: 7m 18s
    This video covers the basics of CAN bus decoding on Tektronix oscilloscopes as well as the setups for decoding, triggering and searching for specific values or conditions.
    기간: 5m 16s
    CAN XL is a third generation of CAN bus, designed to bridge gaps between existing CAN standards and higher data-rate standards such as Automotive Ethernet.  This short video shows how to set up …
    기간: 3m 45s
    Watch the webinar, How to Solve Key LPDDR5 DRAM Test Challenges, for test tips and techniques to meet the design challenges posed by this mobile memory standard.
    기간: 45:30
    View our USB4 Compliance and Characterization Test webinar to learn how you can address the measurement challenges associated with the new USB4 standard.
    기간: 22m 14s
    See how oscilloscopes such as the 6 Series B MSO Mixed Signal oscilloscope are enabled by advanced features of Tektronix SignalVu-PC software to provide RF spectral and modulation analysis across …
    기간: 5:08
    Customers across all industries and applications are using automation to extend the capabilities of their oscilloscopes.  Here we cover what you need to get started programming scopes in Python.  …
    기간: 31:09
    Combining the power of Python and Tektronix oscilloscopes makes complex testing procedures more efficient, accurate and customizable. This short video shows how to use tm_devices, the Tektronix …
    기간: 2m 5s
    Watch this video to learn what's new in V1.4 of tm_devices - the Tektronix device management package that enables better control and usage of test & measurement devices in Python scripts.
    기간: 3m 47s
    Learn how to install a license, either fixed or floating, on DPO/MSO70000C, DPO/MSO70000DX and DPO70000SX oscilloscopes.     
    기간: 2:38
    Learn about changes to the official USB4 compliance test fixtures available from Wilder Technologies and the impact those changes will have on how tests are physically configured and what …
    기간: 4:04
    Watch this short video to learn about the new features in TekScope version 2.4, including TekScope Basic – a new free tier license, maintenance licenses, fast frames with improved support, a new …
    기간: 4m 39s
    A demonstration of TekExpress Automotive Ethernet, an automated application, for Automotive Multigigabit Ethernet (IEEE802.3ch) Compliance Testing.
    기간: 6:56
    Learn how to dramatically cut down test time on required compliance interop tests for USB3 using an automated test suite from Tektronix. 
    기간: 4m 5s
    Watch as we demonstrate the  “User Defined Acquisition Mode” feature included as part of Tektronix's TekExpress DDR5 and LPDDR5 testing solution. With the User-Defined Acquisition Mode, or UDA, a …
    기간: 04:46
    The MSO/DPO70000 Series oscilloscope delivers exceptional signal acquisition performance and analysis capability. Discover your real signals and capture more signal details with the industry's …
    기간: 5m 50s
    Explore testing LPDDR5X, the latest low power memory specification from JEDEC. See what's new and what's the same in the latest spec.  You'll also see how Tektronix is addressing LPDDR5X test …
    기간: 23:49
    Get a view into next generation datacenter technology. After an overview, we dive into the signal analysis of coherent links.
    기간: 24m 53s
    Cloud-based computing power, storage capacity, and network bandwidth have led to the development of the PCI Express 5.0 specification for 32.0 GT/s. This webinar starts with an overview of 5.0 …
    기간: 44:47
    The USB4V2 standard offers higher data transfer speeds, better power delivery, and increased security measures. Learn about testing PAM-3 signals and new measurement methods and tests (both Tx and …
    기간: 30:13
    This Tektronix webinar will teach engineers how to use modeling tools to correlate simulations with high-speed physical layer measurements on Serial Bus Standards using the DPO/MSO70000 Series …
    기간: 27m 39s
    The DisplayPort v2.1 (DP2.1) specification and compliance test requires a new approach to testing to reduce increasing test times. Learn about DP2.1, the challenges it brings, and a new solution …
    기간: 15:23
    MIPI alliance standards have been driving the adoption of newer features and higher data rates for emerging mobile applications.  Oscilloscope-based protocol layer validation enables isolating …
    기간: 31:33
    Learn how to open closed eyes using equalization techniques and how to de-embed reflections and loss caused by the measurement setup using SDLA Visualizer for Tektronix Real-Time Oscilloscopes.
    기간: 30m 56s
    Autonomous driving and connected vehicle are driving higher speed in-vehicle networks, such as Automotive Ethernet. This webinar offers insights into the new measurement requirements for the …
    기간: 55:37
    As design margins shrink, accurate and standard-specific measurement is key to debugging, verifying design and performing interoperability testing when designing PCIe devices. Having confidence in …
    기간: 53m 34s
    This webinar will explain how to prepare for next generation DDR-based memory testing. Learn about the changes these new standards bring to electrical verification and how to prepare for proper …
    기간: 15m 38s
    See how SignalVu VSA software offers insight into MIMO and Phased Array RADAR systems at frequencies and bandwidths up to 70 GHz on up to 4 channels. SignalVu VSA software enables a multi-channel …
    기간: 9:41
    Flex Long Reach Solder Down (FLR) Probe Tips from Tektronix have an increased length to provide a longer reach to the target from the probe connection.  A primary use case for these FLR tips is …
    기간: 3:20
    Learn about our USB4 receiver testing solution which offers comprehensive coverage for compliance requirements outlined by the USB Implementers Forum or USB-IF to give you confidence that your …
    기간: 6m 24s
    Hear an overview of SignalVu, Tektronix's RF and vector signal analysis platform. Tektronix' spectrum analyzers and oscilloscopes combined with SignalVu uniquely allows you to view live spectral …
    기간: 00:12:51
    The NEW P7700 Series TriMode Probe provides the highest probe fidelity available for real-time oscilloscopes. Watch our 60-second video to see how this new probe can help minimize noise and easily …
    기간: 55s
    See how SignalVu VSA software version 5.3 paired with a Tektronix DPO70000SX or MSO/DPO70000DX Series oscilloscope makes an excellent choice for validating a MIMO phased array RADAR because of the …
    기간: 5:28
    Join Pavel Zivny and David Bouse, Tektronix' Principal Technology Leads for Ethernet and PCI Express respectively, as they discuss developments in 112 Gigabit Ethernet, PCI Express Gen6, PAM4 …
    기간: 6:56
    Watch as experts from Anritsu, Synopsys, and Tektronix participate in a panel discussion on the evolution of SerDes validation. They also offer an overview of the new tools and measurement …
    기간: 51m 23s
    For performing jitter analysis, typically the oscilloscope should acquire wave forms at the maximum sample rate.  Learn about the ramifications of having the horizontal acquisition setup for …
    기간: 04:10
    Get a high level look at TekExpress DDR Automation Testing Solution for system level testing of DDR5/LPDDR5. We show how to enter device definition, electrical and timing parameters to measure …
    기간: 5:39
    Learn about the latest best practices for PCI Express 6.0 electrical design and validation. Hear experts from Tektronix, Synopsys, and Anritsu discuss key considerations in designing for the …
    기간: 28:37
    Overview of system with DPO70000SX system for both electrical and optical PAM4 solutions.
    기간: 2m 16s
    Overview of the Tektronix 400G-ZR Coherent Optical Modulation Analyzer.
    기간: 3m 19s
    This video provides an overview of the standard and optional accessories for the 2 Series MSO, including battery pack, VESA mount, rack mount kit, and protective case, as well as the variety of …
    기간: 1m 19s
    Found in labs and workshops across a diverse range of engineering professions, modern oscilloscopes are faster, more precise and more affordable than ever. Many people new to oscilloscopes can be …
    기간: 46m 26s
    Learn how using TekScope software together with entry-level  oscilloscopes enables far greater insight into the data captured and far more powerful analysis and sharing capabilities than might be …
    기간: 21:00
    Technical Marketing Manager Wilson Lee discusses important criteria to use when choosing your next oscilloscope. In this webinar, you will learn about:• The “5 times rule” to avoid Bandwidth …
    기간: 43m 11s
    Watch this short video to learn how to use TekScope Software to decode serial data on a TBS000C Oscilloscope in just a few simple steps and then view the decode in a data stream or in a table …
    기간: 1m 38s
    Prepare for the next PCI Express inflection point by viewing this discussion of validation requirements for PCI Express Gen6.  We review newly introduced transmitter measurements including SNDR …
    기간: 61:49
    TekScope v2.12 includes a built-in screenshot capture feature, HSI enhancements supporting 2.5Gbps USB to ethernet adapters, digital power management, protocol decodes and more.  Watch this short …
    기간: 2m 22s
    Watch to view an introduction to TeKExpress Thunderbolt, our automation solution for Thunderbolt transmitter testing for Thunderbolt 3 and Thunderbolt 4.
    기간: 05:53
    While they promise to provide datacenters with large amounts of data at faster speeds and lower power consumption, DDR5 memory devices have unique test challenges.  Learn about characterization …
    기간: 17:55
    With the approaching ratification of 802.3ck, electrical characterization needs are particularly increasing. This demo highlights next-generation testing for end-to-end characterization of a 53 …
    기간: 2:08
    Having an arbitrary/function generator built into your oscilloscope is useful and convenient. Learn about the AFG outputs available in 2, 4, 5 and 6 Series MSOs.
    기간: 4m 56s
    This video covers the basics of SPI bus decoding on Tektronix oscilloscopes as well as the setups for decoding, triggering and searching for specific values or conditions.
    기간: 5m 18s
    This video covers the basics of I2C bus decoding on Tektronix oscilloscopes as well as the setups for decoding, triggering and searching for specific values or conditions.
    기간: 5m 12s
    For new engineering students, gaining a quick understanding of fundamental concepts is an important step in the learning process. This updated video explains the fundamental principles of the Fast …
    기간: 4m 3s
    Whether oscilloscopes are new to you or you’re a more experienced user, you can optimize your measurements results with the tips offered in this short video.
    기간: 2m 6s
    Watch this short video to see how the Help Everywhere feature built into the TBS1000C Two-Channel Digital Storage Oscilloscope accelerates the learning curve for new users and provides a great …
    기간: 53s
    Watch this video to see how Python scripting can be used together with an 2 Series MSO oscilloscope and 2400 Graphical Series SMU instrument to automate testing, increasing quality, driving …
    기간: 0:38
    Witness the world's first PCIe Gen6 receiver link training test, exhibited by Anritsu at the June 2023 PCI-SIG Developer’s Conference and featuring the Anritsu MP1900A BERT, Tektronix DPO70000SX …
    기간: 01:59
    See our demonstration of new PCIe® 6.0 Rx measurement methodologies on the state-of-art Synopsys® PHY and a discussion of techniques for solving new multilevel validation challenges.  The January …
    기간: 2:25
    View what’s beyond PCIe Gen6 with this 128 GT/s system, a joint showcase created by Tektronix and Synopsys at the June 2023 PCI-SIG Developer’s Conference. Synopsys’ Madhumita Sanyal, Sr. Staff …
    기간: 01:16
    See how a team at Wuppertal University in Germany is developing innovative new technologies that will underpin 6G networks. The team is relying on fast, synchronously running instruments as well …
    기간: 5:44
    What if you need to see the gain and phase of your circuit over a set of frequencies?  Watch this short video to see how easy it is to carry out frequency response analysis and create your own …
    기간: 2m 10s
    Watch this short video to see how easy it is to use the 2 Series MSO Mixed Signal Oscilloscope for remote operation via its VNC server.
    기간: 3m 49s
    Tackle today's high-speed serial signals and tomorrow's too with the scalable, flexible DPO70000SX series. Watch this short video to see how.
    기간: 2m 5s
    Are you trying to build high fidelity wideband signal environments? Are you struggling to pick up on notoriously difficult to detect wideband signals? This webinar will focus on the challenges …
    기간: 1h 2m 35s
    This video provides a detailed demonstration on using the Tektronix Courseware Resource Center to access lab experiments and related educational material.
    기간: 6m 4s
    With the built-in courseware feature, the TBS1000C and TBS2000B oscilloscopes become a powerful educational tool enabling students to create labs on their computer and view them right on the …
    기간: 1m 54s
    Enjoy a guided virtual walk-through of the Tek museum and hear from the museum director about how Tek alumni, fans and volunteers are passing along a lifelong love of engineering and technology …
    기간: 13:23
    This webinar presents an overview of reference clock jitter requirements as they have evolved and offers techniques for making these low femtosecond measurements using a real time oscilloscope. 
    기간: 53:02
    Watch our review of the physical layer specification as well as compliance test and troubleshooting of the new IEEE 802.3ck Ethernet standard, with particular focus on the AUI interfaces test. The …
    기간: 41:09
    See our demonstration of new PCIe® 6.0 Tx measurement methodologies on the state-of-art Synopsys® PHY and a discussion of techniques for solving new multilevel validation challenges.  The January …
    기간: 2:12
    Listen as Joey Chiu, Tektronix PCI Express Applications Engineer, discusses PCI Express Gen5 Receiver (Rx) calibration. He covers how to prepare for it, what to expect, troubleshooting, and how to …
    기간: 23:15
    Watch as David Bouse explains the evolution of PCI Express from Gen5 to Gen6. Then hear from Pavel Zivny as he and David discuss PAM4 signaling in PCIe and how it compares with PAM4 as applied in …
    기간: 1:00:00
    Learn how you can address five of the thorniest measurement challenges associated with the new DDR5 standard. Get an update on the DDR5 Rx/Tx compliance test and insight in the latest …
    기간: 56:20
    Watch as the TekExpress DDR Tx Automation Software Solution for LPDDR5  is set up to match the hardware configuration for burst detection of a Device Under Test (DUT) and reporting of results.
    기간: 07:45
    Watch PCIe Gen 5 Receiver Automated Test Solution and the CEM test application. The specification requires the stressed eye calibration to be carried out over an optimum channel and other adjusted …
    기간: 05:01
    Watch our webinar on the latest Rev 1.0 requirements for validation of a 6.0 capable SerDes design including SNDR and RLM measurements of transmitters and stressed eye calibration for receiver …
    기간: 56:53
    Watch the webinar, PCI Express Gen 5: Solving 32 GT/s Receiver Compliance and Validation Challenges, to hear Tektronix’ David Bouse and Antritsu’s Hiroshi Saito offer insights into receiver …
    기간: 52:15
    Learn about the current challenges in testing optical transceivers in a high volume manufacturing setting, and see a demonstration of a transceiver test system for PAM4 characterization using the …
    기간: 34:04
    If you tend to look at a lot of digital signals but don't want to lose analog channels, then why not check out how easy the 16 digital channels are to use! See more today by adding them to your 2 …
    기간: 1m 50s
    Serial data is everywhere in modern embedded circuits. What if you need to create a serial data stream but don't have a separate pattern generator? Not to worry - the 2 Series has one built-in …
    기간: 2m 5s
    Watch this video to learn more about impedance mismatch, which can cause the voltage that is displaying on the oscilloscope to be different than on the AFG.
    기간: 3m 45s
    Watch this short video to see how to use the Raspberry Pi as a remote control PC for test automation with the Tektronix 2 Series MSO Mixed Signal Oscilloscope and Python language.
    기간: 3m 50s
    The accelerated development of 400G Ethernet technology is driving new requirements through the test community as it relates to measuring electrical PAM4 systems. This presentation will review …
    기간: 1h 12s
    Watch Tektronix’ Pavel Zivny and Ali Emsia at the ECOC 2022 Ethernet Alliance booth as they discuss an 800G link based on an IEEE 802.3ck 100G per lane standard and measured by the Tektronix …
    기간: 2:04
    Learn about the domain/zonal controllers and discuss what changes it will bring for in-vehicle network architectures, highlighting some of the testing challenges measurement requirements. 
    기간: 57:08
    Watch this video learn about the new features in TekScope version 1.44, including RF analysis capabilities, added support for the MSO2000 and MSO2000B oscilloscopes, user interface improvements …
    기간: 8m 8s
    How did our engineers manage to fit the capability of a full-functioning scope into such a small form factor? Watch and listen as our engineers talk about their experience delivering the NEW 2 …
    기간: 5m 48s
    Touchscreen oscilloscopes are making their way into labs, workshops and classrooms. While their intuitive interfaces makes setting up and making measurements easier than ever, an understanding of …
    기간: 39m 10s
    This video highlights some of the newest features and capabilities of the USB 3.1 Receiver testing application. These updates enhance the functionality of the software, and give users more tools …
    기간: 5m 25s
    The USB 3.1 Receiver application's Margin Test feature gives engineers quantitative answers on a design's performance and as a debug tool, a better understanding of where devices fail. This video …
    기간: 3m 34s
    This video focuses on the Link Training Status State Machine UI feature of the USB 3.1 Gen2 Receiver test application and shows the path that is taken by a device being trained into loopback mode …
    기간: 4m 35s
    The physical setup for USB 3.1 receiver calibration and testing is shown in this video.
    기간: 4m 33s
    For new engineering students, gaining a quick understanding of fundamental concepts is an important step in the learning process. This video uses plain language and clear visual examples to define …
    기간: 4m 31s
    Prepare for the new challenges in optical networking. During this webinar, experts will address critical design issues posed by integrating optical PAM4 capabilities into optical networking …
    기간: 48m 56s
    Oscilloscopes are often used in educational settings, and our TBS1000C and TBS2000B oscilloscopes includes many features that come standard. Watch this video to learn about the many ways that the …
    기간: 1m 51s
    Floating measurement in power applications is challenging due to safety and accuracy concerns. Tektronix TPS2000B and THS3000 oscilloscopes use innovative Isolated Channel Technology. It helps …
    기간: 3m 9s
    Prepare future engineers for tomorrow's exciting challenges by giving them the latest skills and knowledge they need for life beyond the classroom, including hands-on experience with real-life …
    기간: 1m 38s
    This video shows the strength of the DPO70000SX Oscilloscope for Wideband RF measurements with great noise density and low EVM measurements. See the performance of the DPO70000SX for yourself!
    기간: 2m 16s
    The DPO70000SX Oscilloscope has very good jitter noise floor. This is important when making critical timing margin measurements on fast devices or silicon. In this video we will see what the Time …
    기간: 1m 50s
    Watch this video to get an overview of the new Link Training Tool, which forms part of the expanded analysis software for Tektronix DPO70000SX oscilloscopes. Link Training helps engineers to …
    기간: 1m 31s
    See the latest example of Tektronix history of innovation with this informative video as CTO Kevin Ilcisin discusses the expected benefits of newly patented Asynchronous Time Interleaving being …
    기간: 4m 56s
    End to end measurement solutions from Tektronix enable researchers and designers to comprehensively and swiftly analyze, debug and test cutting-edge technology with greater speed and precision …
    기간: 1m 21s
    Get an overview of the optical solutions available from Tektronix. Learn about what we showcased at our OFC 2016 exhibit, then learn more about these solutions online.
    기간: 1m 16s
    This demonstration of THz wireless transmissions is in collaboration with research professors from the Institute of Electronics, Microelectronics and Nanotechnology in France, who are performing …
    기간: 2m 58s
    Prof. Dr. Ullrich Pfeiffer of Wuppertal University explains why his team chose Tektronix for their 6G research into making possible increased data rates using multiple channels and balancing speed …
    기간: 0:58
    Description: Learn what's new in SAS1-4 and SATA testing. You'll gain an understanding of the latest SAS and SATA versions, and their implications for both transmitter and receiver testing.
    기간: 52m 25s
    Our Tektronix domain experts, Dan Froelich and Pavel Zivny, contrast the methodologies of the PCI Express 4.0/5.0 and IEEE 26 GBd NRZ/PAM4 electrical specifications and engage in a lively …
    기간: 1h 1m 36s
    PCI Express I/O bandwidth has doubled every 3 years on average thereby leading to an increased demand for this full duplex high speed bus architecture. As the industry begins deploying the 5.0 …
    기간: 50:45
    Watch as we discuss PAM4 optical transceivers, both 100G and 400G, including the latest on standards, testing, and characterization. We cover high throughput NRZ measurement and margin and compare …
    기간: 1:00:07
    The accelerated development of 400G Ethernet technology is driving new requirements through the test community as it relates to measuring electrical PAM4 systems. This presentation will review …
    기간: 1h 12s
    The rapid growth of ever-more powerful mobile devices, and the adoption of new wireless technologies such as 802.11ac, has enterprise networks struggling to keep pace. To meet these rising …
    기간: 27m 16s
    This webinar features Tektronix expert, Dorine Gurney, sharing her insights on the key factors to consider when performing transmitter testing to IEEE 802.11ad. Topics covered include:• What are …
    기간: 24m 54s
    HDMI specification version 2.1 is the most recent update of the HDMI standards and supports a range of higher video resolutions and refresh rates, including 8K60 and 4K120. Watch this …
    기간: 21:02
    This webinar will show how Cadence and Tektronix can enable you with flexible and power efficient DDR4 IP, design and analysis tools used in the office, and lab-based solutions to address the key …
    기간: 1h 5m 20s
    This webinar discusses how designers and test engineers can determine the most effective optical test strategies for 400G Optical Standards. Learn where PAM-2 and PAM-4 fits, PAM-4 specific Mask …
    기간: 36m 10s
    Learn about the coherent modulation being considered for 400G networks, the key building blocks of a coherent test system, how to optimize measurement accuracy and the benefits of customizable …
    기간: 42m 47s
    Learn how to address the test and measurement challenges posed by PCIE Gen1-5 for both base silicon testing and CEM compliance testing. Gain insights and solutions for automation, validation, and …
    기간: 41m
    With PAM4 moving into production and 400G design efforts in full swing, the test challenges around characterization, verification and debug, and manufacturing testing have never been greater. This …
    기간: 18m 33s
    Find out how the Tokyo Metropolitan Industrial Technology Research Institute (TIRI) reduced their testing time of wideband signals like IEEE 802.11ad with the Tektronix DPO70000SX. Previously …
    기간: 3m 43s
    The UltraSync architecture provided with DPO70000SX series oscilloscopes allows you to connect two or more oscilloscopes together to easily add acquisition channels while maintaining channel-to …
    기간: 4:59
    In this video we look at a topic that is becoming increasingly important in the high-speed serial industry—how to perform embedded measurements at the IC or PCB level using probes.
    기간: 4m 14s
    This video shows the spurious-free dynamic range on the DPO70000SX Oscilloscope. Illustrated is how the scope’s dynamic range is performing using 40GHz tones sent into the instrument on a 5GHz …
    기간: 2m 37s
    This video highlights the benefits, and proper use, of external attenuation with the 70GHz DPO70000SX Series Oscilloscope. See how measurement signal fidelity can be improved with easy-to-use …
    기간: 4m 27s
    This video demonstrates how to analyze the frequency response of an inverting amplifier circuit using Keithley KickStart Software, a Keithley 2220-30-1 Dual-Channel Power Supply, a Tektronix …
    기간: 5m 39s
    Want to remote control your oscilloscope from another room, city or even country?  The 2 Series MSO has a built-in VNC server that is fluid and convenient. Watch how easy it is to setup in under a …
    기간: 1m 12s
    Having multiple traces on the same screen can take time to accurately setup.  See how the 2 Series MSO makes use of its 'Stacked' mode to not only saves time setting up each trace, but also allows …
    기간: 1m 29s
    Wondering if your signal is within a certain tolerance?  Take a look at the mask testing feature of the 2 Series MSO, and see how easy and effective it is to setup.
    기간: 1m 14s
    Decoding serial data need not be difficult.  See how simple, fast and accurate it is to decode this common serial data standard with the intuitive user interface of the 2 Series MSO.
    기간: 1m 5s
    While there are many reasons why you should buy the new 2 Series MSO from Tektronix, check out our top 5 reasons why you need one!
    기간: 1m 18s
    Serial data debug is a common job to be done.  What if you needed to search through a data stream?  The 2 Series MSO can do this for you.  Watch how easy and fast you can do this on an I2C data …
    기간: 1m 10s
    Serial data is everywhere in modern embedded circuits, and, while this mature bus isn't as prevalent as it once was, there is still plenty of usage. See how easy it is to decode it into ASCII with …
    기간: 1m 5s
    Advanced triggering is a must for any modern oscilloscope.  Changing trigger modes on the 2 Series MSO is just a few taps of the screen.  Take a look at the highly useful runt trigger and see how …
    기간: 55s
    Have you ever been asked to setup another user's oscilloscope?  What if that user is not in the same lab?  TekDrive allows the sharing of not just data, but also oscilloscope setup.  Watch how …
    기간: 1m 46s
    If you work remotely from your colleagues, sharing data seamlessly is vital.  Watch how TekDrive allows you to share test data with anyone and anywhere, even if the other person doesn't have an …
    기간: 1m 37s
    Using an oscilloscope to measure signals in the RF domain can be daunting.  Watch how easy and effective it is to make use of the FFT capability in the 2 Series MSO.
    기간: 1m 11s
    Having the ability to generate signals into your design is very useful.  Take a look at how easy it is to not just generate standard signals, but also recall custom waveforms with the 2 Series MSO …
    기간: 1m 6s
    Decoding CAN differential doesn't always mean you need a differential probe.  See how easy it is to deocde via the maths channel on the 2 Series MSO. 
    기간: 1m 13s
    Making accurate measurements on an oscilloscope is vital.  The 2 Series MSO has built-in automated measurements and easy to control cursors that provide confidence in your measurements.
    기간: 1m 34s
    Watch how easy it is to make notes on the screen & traces of the 2 Series MSO. It's perfect if you are sharing your test results or producing reports on your debug findings.
    기간: 1m 18s
    This short video shows how to debug a compliance measurement that has failed by using Tektronix’ Jitter and Eye Diagram Software, DPOJET. Using DPOJET, engineers can go from a compliance …
    기간: 4m 36s
    TekScope PC software, combined with Tektronix oscilloscopes, makes it easy to log waveform data, waveform images and measurements on your PC.  Simply set the logging interval, count, and hit Start …
    기간: 5m 29s
    This video highlights the benefits of using the DPO70000SX real time oscilloscope-based system for 400G optical/electrical PAM-4 debug and analysis.
    기간: 4m 3s
    See how the 4, 5, and 6B Series of MSO oscilloscopes provide a platform for multichannel test and measurement of MIMO systems through extension of MATLAB® algorithms for analysis of channel …
    기간: 24:54
    John Calvin puts the latest oscilloscope technology to work. The DPO70000SX oscilloscopes allows engineers to capture and measure high-frequency signals more accurately than possible with …
    기간: 3m 24s
    At OFC 2018 it’s not just about speed but also interoperability both between standards and among equipment vendors. Here Tek’s Pavel Zivny showcases a demonstration system with a Tektronix DSA8300 …
    기간: 3m 27s
    Tektronix introduces the industry’s most accurate and repeatable single box solution for characterizing and debugging IEEE802.11ad transmitter PHY for silicon and systems. In this IEEE802.11 …
    기간: 3m 47s
    Finding the right filter settings for your optical TDECQ and NRZ measurements can be a pain on conventional solutions. With the new real-time O to E’s (DPO7OE Series) from Tektronix changing the …
    기간: 1m 54s
    At this ECOC 2016 Demo Station, we're looking at generating a 50+ Gigabaud Optical Signal and also how our DPO70000SX oscilloscope enables a stable trigger on a 32 Gigabaud signal.
    기간: 2m 49s
    Learn how new software features of the Tektronix OM4000 series, which enable multiple optical modulation analyzers to be combined, are enabling research into higher fiber optic transmission …
    기간: 3m 2s
    Watch a demonstration of the first working version of TDECQ that can operate on a 64 gigabit per second DR4 signal.
    기간: 1m 49s
    See the versatility of our high-speed optical-to-electrical converters (DPO7OE1 and DPO7OE2 Optical Probes) for 200G and 400G PAM4 measurements. Multiple high-speed acquisitions of long pattern …
    기간: 3m 41s
    Find out how new PAM4 software updates including full noise decomposition enable you to ensure your designs comply with the latest changes in compliance standards. 
    기간: 5m 16s
    In this video you will learn how easy it is to recover a clock on an optical PAM4 signal and display an eye. The DPO7OE1 and DPO7OE2 is the perfect solution for optical high-speed measurement …
    기간: 2m 26s
    Learn how to perform multi-domain signal analysis of 5G base station and user equipment systems.  See the benefits of using a mixed domain oscilloscope for analyzing RF amplifier performance.  …
    기간: 6:47
    Watch to learn how you can simplify several 3GPP 5G New Radio transmitter tests. You’ll see how to verify transmitter characteristics including power, power dynamics, signal quality and RF …
    기간: 8:50
    Take a look at Tektronix complete 400G coherent optical test system recently on display at OFC. It includes next generation signal generation, modulation, acquisition, and analysis.
    기간: 5m 31s
    See 100G/400G Real-Time and Equivalent Time oscilloscope solutions that enable seamless transition across your workflow. From product R&D and debug to design validation and production test – see …
    기간: 3m 38s
    Get ready to change the way you work - forever - with NEXT GEN TEK.  Watch this short video about the 2 Series MSO Mixed Signal Oscilloscope.
    기간: 30s
    Watch this short video to see the different configurations for mounting the 2 Series MSO on its stand, the stability provided by the elastomer base, and the options for mounting the unit on a …
    기간: 4m 34s
    Watch the reactions and hear the comments of Oregon State University students as they see and have the opportunity to use the 2 Series MSO Mixed Signal Oscilloscope for the very first time.
    기간: 2m 31s
    Watch this video to learn about the new features in TekScope version 1.40, including continuous acquisition, license expiration notification, and IMDA-MECH and WBG-DPT in the pro automotive and …
    기간: 7m 19s