Kontaktaufnahme

Live-Chat mit Tektronix-Vertretern. Verfügbar von 9 bis 17 Uhr CET Geschäftstage.

Anrufen

Kontaktieren Sie uns telefonisch unter

Verfügbar von 9 bis 17 Uhr CET Geschäftstage.

Download

Laden Sie Handbücher, Datenblätter, Software und vieles mehr herunter:

DOWNLOADTYP
MODELL ODER SCHLÜSSELWORT

Feedback

Produktsupport und Downloads

Willkommen beim Tektronix-Produktsupport

Wir freuen uns, den ganzen Tag mit Ihnen über Technik zu sprechen, aber wir wissen, dass Sie es eilig haben. Daher haben wir es Ihnen leicht gemacht, Handbücher, Datenblätter und Software für alle unsere aktuellen Produkte und viele nicht mehr verfügbare Produkte herunterzuladen. Sagen Sie uns einfach, welches Produkt Sie verwenden, und wir zeigen Ihnen alles, was wir haben.

Das von Ihnen ausgesuchte Produkt kann derzeit gekauft werden. Außerdem stehen die folgenden Supportinformationen zur Verfügung.

  • FAQs – Häufig gestellte Fragen FAQ-ID
    Sink function doesn't go to zero when not initialized
    Question: I've set my 2450 to sink 100mA. When I enable the load it sinks 100mA, but when I disable the load with blue button in the corner, it still sinks 10mA when the output if off. I want it to go to zero mA load. Answer: The 2450 SMU is a four …
    KB-01047
    Sweep: Can I use an external trigger to stop a SourceMeter sweep?
    Question: Sweep: Can I use an external trigger to stop a SourceMeter sweep? Answer: The SourceMeter trigger model does not have provisions for stopping a sweep using a trigger signal. However, there is a way to accomplish this by using the …
    KB-01468
    Speed: What is NPLC?
    Question: Speed: What is NPLC?   Answer: The Number of Power Line Cycles (NPLC) indicates how long an input signal is integrated to obtain a single measurement. Noise introduced from the power line tends to be periodic. If the A/D converter …
    KB-01485
    Remote Operation: Why do I get a VISA timeout (BFFF0015) using RS-232 with a SourceMeter?
    Question: Why do I get a VISA timeout (BFFF0015) using RS-232 with a SourceMeter?   Answer: When programming a SourceMeter through the VISA layer into RS-232, the use of SCPI commands is required. However, there are additional subtle requirements …
    KB-01460
    2450 - Range Compliance: Source limited unexpectedly due to low Measurement Range
    Question: When we try to read the measurements from our 2450 instrument it causes any output voltage to automatically be 1.154 volts into a DMM, which is below the programmed value. Answer:  There is a condition on 24xx series SMUs called ‘range …
    KB-01028
    Ohms: What is AUTO or MANUAL mode when measuring Resistance with a 2400?
    Question: Ohms: What is AUTO or MANUAL mode when measuring Resistance with a 2400? Answer: What is the difference between Auto and Manual mode for resistance in the Model 2400? The AUTO resistance measuring mode of the Model 2400 configures the unit …
    KB-01492
    How do I create an I-V Characterizer test that uses more than one SMU Instrument?
    Question: How do I create an I-V Characterizer test that uses more than one SMU Instrument? Answer: Use the “Instruments” button in the I-V Characterizer app toolbar to access the “Add Channels” button to add more SMU instruments to your test.   You …
    KB-01364