Did the Performance Verification software change when TLA Application Software v5.1 was introduced?

Did the Performance Verification software change when TLA Application Software v5.1 was introduced?

The Performance Verification software did change a little.  The software for TLA7Lx/Mx/Nx/Px/Qx and TLA7Dx/Ex modules have not been updated to run on a remote PC controller.  If you need to verify one of those modules, you must do so in a TLA7012 or TLA700-series mainframe.  Also, the PV software will display a PCI-VXI bridge error when running with TLA Application Software version 5.x, unless you first delete the Visa32.dll file from the C:\Tekcats folder.  Then when you see the message "UNABLE TO ENABLE SRQ EVENTS", you can continue by pressing the Enter key twice.