Question :
What is the maximum bit rate a decoded SPI bus can trigger on?
Réponses :
Different oscilloscopes have different triggering circuitry therefor the limits of what speeds can be achieved vary by scope. Please use the following table to easily look up your scope and determine your max SPI bus trigger level. For more questions please contact your local Technical Support Center and an Application Engineer can quickly answer your questions.
Scope + Option Max Trigger Rate MSO/DPO2000 + DPO2EMBD 10 Mb/s MSO/DPO3000 + DPO3EMBD 10 Mb/s MSO/DPO4000 + DPO4EMBD 10 Mb/s MSO/DPO4000B + DPO4EMBD 50 Mb/s MSO/DPO5000 + SR-EMBD 10 Mb/s MSO/DPO5000B + SR-EMBD 10 Mb/s DPO7000C + SR-EMBD 10 Mb/s MSO/DSA/DPO70000C/D/DX + SR-EMBD 10 Mb/s MDO3000 + MDO3EMBD 10 Mb/s MDO4000 + MDO4EMBD 10 Mb/s MDO4000B + MDO4EMBD 50 Mb/s MDO4000C + MDO4EMBD 50 Mb/s For additional information on SPI bus trigger and analysis, please refer to the Datasheet, User Manual or Product Performance and Verification Manual.
Note: Windows scopes can decode SPI signals up to the bandwidth of the scope, only the trigger is set in the table above.
Cette FAQ concerne :
Série du produit : MSO3000/DPO3000 Oscilloscopes au phosphore numérique et à signaux mixtes MSO/DPO70000DX Oscilloscope à signaux mixtes MSO/DPO2000B Oscilloscope à signaux mixtes MSO4000/DPO4000 DPO7000 Oscilloscope multidomaine de la série MDO3000 Les oscilloscopes multidomaines de la série MDO4000C
Produit :
Numéro de la FAQ 62256
Afficher toutes les FAQ »