Question :
How do I setup and run SATA RSG-RMT compliance testing on my DUT with an oscilloscope and AWG?
Réponses :
The best answer on how to do receiver SATA testing with an AWG is to look at the Method of Implementation (MOI). This can be found here MOI. This guide will walk through all the manual tests that are needed and performed for compliance testing. Please note that RSG testing requires many scope options including the error detector option (ERDDT). This opton is only allowed on the 70000B series scope or higher.
For a general demonstration of SATA RSG testing please watch the video below.
Cette FAQ concerne :
Série du produit : Oscilloscopes au phosphore numérique et à signaux mixtes MSO/DPO70000DX
Produit :
Numéro de la FAQ 64701
Afficher toutes les FAQ »