How do I setup and run SATA RSG-RMT compliance testing on my DUT with an oscilloscope and AWG?
The best answer on how to do receiver SATA testing with an AWG is to look at the Method of Implementation (MOI). This can be found here MOI. This guide will walk through all the manual tests that are needed and performed for compliance testing. Please note that RSG testing requires many scope options including the error detector option (ERDDT). This opton is only allowed on the 70000B series scope or higher.
For a general demonstration of SATA RSG testing please watch the video below.
이 FAQ는 다음에 적용 됩니다:
FAQ ID 64701모든 FAQ 보기 »