Contactez-nous

Chat en direct avec un représentant Tek. Service disponible de 9 h à 17 h, CET jours ouvrables.

Téléphone

Appelez-nous au

Disponible de 9 h à 17 h CET jours ouvrables.

Télécharger

Télécharger des manuels, des fiches techniques, des logiciels, etc. :

TYPE DE TÉLÉCHARGEMENT
MODÈLE OU MOT CLÉ

Feedback

Do the existing MSO/DPO/MDO4000/B Series application modules work with the MDO4000C?

Subject: Compatibility | Published: October 2026 | FAQ ID: KB-01438

Question: Do the existing MSO/DPO/MDO4000/B Series application modules work with the MDO4000C?

Answer: Yes, almost all work from all legacy MSO/DPO/MDO4000/B series scopes. The only one that has some requirements is the MDO4TRIG which requires a spectrum analyzer option MDO4SA3 or MDO4SA6 be installed on your MDO4000C before RF triggering capabilities would work. Otherwise all modules are compatible on this new oscilloscope. |

Note: MSO/DPO/MDO3000 Series modules are not compatible on the 4000 Series. 

Note 2:  ≥350 MHz bandwidth models are recommended for 100BASE-TX; USB high-speed supported only on models with 1 GHz analog channel bandwidth.