Question :
What are some of the required tests for the SATA standard?
Réponses :
For SATA revision 1 the following are some of Pass/Fail tests required in the standard:
Amplitude Differential Voltage
AC Common Mode Voltage
Timing Rise Time
Fall Time
Differential Skew
Jitter Total Jitter
Deterministic Jitter
Random Jitter
SSC Analysis
Out Of Band COMINIT
COMWAKE
COMRESET
Note the eye diagram is not required for compliance but is recommended for fault location and as informational.
Cette FAQ concerne :
Aucune série du produit
Produit :
Numéro de la FAQ 53096
Afficher toutes les FAQ »