PSPL8003 15 GHz Low Noise Amplifier LABware Module

PSPL8003 Datasheet

Les produits figurant sur cette fiche technique ne sont plus vendus par Tektronix.
Référez-vous à Tektronix Encore pour les équipements de test reconditionnés.
Consultez l'assistance et les informations de garantie pour ces produits.

PSPL8003 Datasheet

The Model PSPL8003 15 GHz Low Noise Amplifier LABware Module is designed for bench-top lab use. This LABware module can simply be plugged in with a line cord (either 110 V or 220 V) and the amplifier is ready for use. The PSPL8003 is a broadband linear amplifier intended for use amplifying signals with a minimum amount of distortion. The PSPL8003 provides exceptional gain flatness and low deviation from linear phase while providing a bandwidth of 10 kHz to 15 GHz. This amplifier is ideal for use as a linear gain block.

Key performance specifications

LABware bench-top instrument
15 GHz bandwidth with excellent gain flatness (±0.3 dB)
Lower 3 dB frequency of 10 kHz
Low deviation from linear phase (±3 degrees)
1 dB compression point of 13 dBm
Integrated power supplies

Typical performance

The following plot shows the response of the PSPL8003 to a 100 mv 20 ps rise time step. The PSPL8003 is an inverting amplifier; the output has negative polarity. From the top to the bottom, the time scales are 50 ps/div, 500 ps/div, and 2 ns/div.

Specifications

Specifications

Parameter	Symbol	Units	Minimum	Typical	Maximum	Comments
Impedance	Z	ohms		50
Upper 3 dB freq.	f_c,h	GHz	14	15
Lower 3 dB freq.	f_c,l	kHz		10	20
Small signal gain	S₂₁	dB	13	15	16	Average at 1 GHz and 2 GHz
Max Power Out (-1 dB gain comp)	P_1 dB	dBm	10	13
Gain Flatness		dB		±0.3	±0.5	50 MHz
Group Delay Flatness		ps		±3	±5	50 MHz
Input Return Loss	S₁₁	dB			-10	50 MHz
Output Return Loss	S₂₂	dB			-10 -9.5	50 MHz 14 GHz ≤ f
Noise Figure	NF	dB		5.0	7.0	f > 50 MHz
Polarity	Inverting
Coupling	AC, input and output
RF Connectors	SMA jacks (f)

Ordering information

Models

PSPL8003: LINEAR AMPLIFIER, 15 GHz, LABware