問題：
Using the HT3 software+ I couldn't connect the AWG and DTG+ when I click the test connection the "Connection failure" message box is appears. What can I do?
答案：
Following tips helps to troubleshoot the test setup:
Check the AWG and DTG’s GPIB connection
Check the GPIB bus timing value in the NI Measurement Automation explorer.
Try communicating to the device using the NI Measurement automation explorer.
Check the NI driver’s installation.
此常見問答集適用於：
沒有任何產品系列
產品：
常見問答集 ID 59861
檢視所有常見問答集 »