질문:
Using the HT3 software+ I couldn't connect the AWG and DTG+ when I click the test connection the "Connection failure" message box is appears. What can I do?
답변:
Following tips helps to troubleshoot the test setup:
Check the AWG and DTG’s GPIB connection
Check the GPIB bus timing value in the NI Measurement Automation explorer.
Try communicating to the device using the NI Measurement automation explorer.
Check the NI driver’s installation.
이 FAQ는 다음에 적용 됩니다:
제품 시리즈 없음
제품:
FAQ ID 59861
모든 FAQ 보기 »