與我們聯絡

提出問題

與 Tek 業務代表即時對談。 上班時間：上午 6:00 - 下午 4:30 (太平洋時間)

致電

請致電

與 Tek 業務代表即時對談。 上班時間：上午 8:30 - 下午 5:30 (太平洋時間)

下載

下載手冊、產品規格表、軟體等等：

下載類型
機型或關鍵字

意見回饋

How do I clear my memory using TekSecure on a MSO/DPO/MDO4000 Series oscilloscope?

Subject: Software / Firmware | Published: October 2026 | FAQ ID: KB-01971

Question: How do I clear my memory using TekSecure on a MSO/DPO/MDO4000 Series oscilloscope?

Answer: This procedure for clearing the memory on oscilloscope can be applied to the DPO/MSO/MDO4000, DPO/MSO3000 and DPO/MSO2000 Series oscilloscope families. By clearing the memory you will lose all saved reference waveforms, saved setups and all other settings the scope was holding. Please be sure to save all information from the scope before doing a Teksecure erase.