與我們聯絡

提出問題

與 Tek 業務代表即時對談。 上班時間：上午 6:00 - 下午 4:30 (太平洋時間)

致電

請致電

與 Tek 業務代表即時對談。 上班時間：上午 8:30 - 下午 5:30 (太平洋時間)

下載

下載手冊、產品規格表、軟體等等：

下載類型
機型或關鍵字

意見回饋

MSO Option SEC Read This First

Change the default BIOS password for enhanced security

Use this procedure to change the BIOS access administrator password from the default factory installed password to a custom password for your organization. Only applies to instruments with option 5-SEC installed.


此手冊適用於:

MSO56, MSO58, MSO58LP, MSO64, MSO44, MSO46, MSO54B, MSO56B, MSO58B, LPD64

相關產品資訊

  • 手冊類型: 版本資訊
  • 零件編號: 071356902
  • 發行日期:

下載即代表您同意 手冊下載協議的條款與條件。

手冊下載協議

注意：從此網站下載任何文件前，請先詳閱下列條款與條件。 若從 Tektronix 網站下載手冊，即表示您同意下列條款與條件：

目前支援之產品的手冊：

Tektronix 在此授予 Tektronix 儀器擁有人權限與授權，可在此網站下載和重製手冊，供內部或個人使用。 未經 Tektronix, Inc 特別書面授權，不得重製目前支援的產品手冊，並散佈給他人。

Tektronix 手冊可能經適當修訂，以反映製造過程中對產品所做的變更。 因此，任何現有產品可能具備不同版本的手冊。 請務必確保使用者取得特定產品序號的正確手冊版本。

不再支援之產品的手冊：

Tektronix 不提供已不再長期支援的量測產品手冊。 Tektronix 於此授權其他人重製和散佈任何 Tektronix 量測產品手冊副本的權限與授權，包括使用者手冊、操作員手冊、維修手冊等，該等手冊應 (a) 具備 Tektronix 零件編號，且 (b) 為 Tektronix 不再支援的量測產品手冊。

Tektronix 手冊可能經適當修訂，以反映製造過程中對產品所做的變更。 因此，任何現有產品可能具備不同版本的手冊。 請務必確保使用者取得特定產品序號的正確手冊版本。

此等權限與授權不適用於 Tektronix 目前仍支援的任何手冊或其他出版品，或視訊生產產品/彩色印表機產品的任何手冊或其他出版品。

免責聲明：

若量測產品手冊或其他出版品並非 Tektronix 提供，或並非依前述權限和授權製作或散佈，Tektronix 將不保證其資訊、文字、圖片、示意圖、零件清單或其他內含資料的準確度或完整性。

Tektronix 得逕行變更此網站內容或其產品，恕不另行通知。

責任限制：

若因使用依前述權限和授權製作或散佈的任何量測產品手冊或其他出版品，而導致任何損害 (包括但不限於：任何二次損壞或意外損壞、利益損失損害、營業中斷損害或違反智慧財產權損害)，Tektronix 概不負責。

 

Read Online

MSO Option SEC Read This First
CHANGE THE DEFAULT BIOS PASSWORD FOR ENHANCED SECURITY

Change the default BIOS password for enhanced security

Instruments with the option installed have the BIOS administrator password set to Tektronix by default. Using a BIOS administrator password prevents unauthorized BIOS modification and booting from USB flash devices.

Before you begin

Make sure to keep a record of the new instrument BIOS administrator password that you create in your organization’s records. There is no way for Tektronix to gain access to the instrument BIOS settings once the password has been changed from the factory default value, if access is needed for repairs.

If you need to return the instrument to Tektronix for service, change the BIOS administrator password back to the factory default value Tektronix before sending the instrument to the Tektronix Service Center.

About this task

For enhanced security, change the default BIOS administrator password before using the instrument in your work area. Use the following procedure to change the default BIOS administrator password.

Note:This password is only used to access the BIOS settings utility. No password is required to power-on and use the instrument.

Procedure

  1. Connect a keyboard to the instrument. If you are changing the password for an MSO58LP or LPD64, also install an external monitor.
  2. Power on the instrument.
  3. While the instrument is powering on, continuously tap the F11 function key until the Enter password field is shown.
  4. Enter Tektronix and press the Enter key. The instrument opens the Please select boot device menu.
  5. Use the down arrow key to select Enter Setup and press the Enter key. The instrument opens the Utility Setup menu.
  6. Use the right arrow key to select the Security tab.
  7. Use the arrow keys to select Administrator Password (should be selected by default) and press the Enter key. The instrument opens the Enter Current Password field.
  8. Enter Tektronix and press the Enter key. The instrument opens the Create New Password field.
  9. Enter a new password in accordance with your organization’s guidelines and using the following constraints.
    • Valid characters are A-Z, a-z, 0-9, and !, @, #, $,%, ^, &, and *
    • No spaces or periods
    • The password must be between 3 to 20 characters long
  10. Press the Enter key. The instrument opens the Confirm New Password field.
  11. Reenter the new password and press the Enter key. The Confirm New Password field closes and returns you to the Setup Utility screen.
  12. Press function key F4 to save the BIOS settings and exit the Setup Utility screen. Select Yes and press the Enter key when requested to save configuration and exit.
  13. The instrument closes the Setup Utility screen and begins the normal power-on process.

Results

This completes the procedure to replace the default BIOS access administrator password.