與我們聯絡
與 Tek 業務代表即時對談。 上班時間：上午 6:00 - 下午 4:30 (太平洋時間)
致電
請致電
與 Tek 業務代表即時對談。 上班時間：上午 8:30 - 下午 5:30 (太平洋時間)
下載
下載手冊、產品規格表、軟體等等：
意見回饋
PSPL5350 6 dB Power Divider, 50 GHz
PSPL5350 Datasheet
Tektronix 不再銷售此產品規格表上的產品。
檢視 Tektronix Encore 以取得檢修測試設備。
檢查這些產品的支援和保固狀態。
The PSPL5350 6 dB Power Divider provides excellent amplitude and phase performance power division from DC to frequencies over 40 GHz. The outputs are nominally attenuated by 6 dB. All ports are impedance matched to 50 Ω when both outputs are terminated in 50 Ω. Power dividers are built using a three-resistor network. The resistors have 1% tolerances, resulting in precise 50 Ω impedance matches at any port. This divider is engineered to provide excellent amplitude and phase symmetry throughout the operating range, regardless of port selection. Maximum division symmetry is obtained when port 1 is used as input, with ports 2 and 3 providing the divided signal output.
Typical performance
Frequency responses from 40 MHz to 40 GHz, liniear sweep at 4 GHz/div
Specifications
| Parameter 1 | Value |
|---|---|
| Rise time | 8 ps, typical |
| Insertion Loss BW (-1.5 dB) | DC to >40 GHz |
| Insertion Loss, DC | 6.02 ± 0.08 dB max, DC |
| Insertion Loss, AC | 5.8 |
| Insertion Loss Asymmetry | 0.05 dB maximum, DC
|
| Phase Tracking | |
| Delay | 100 ps, typical |
| Input Impedance, DC | 50 ± 0.5 Ω max |
| Return Loss | >30 dB, 0 – 1 GHz
>17 dB, 1 – 15 GHz >12.5 dB, 15 – 40 GHz |
| Max Input Power, avg | 2.5 Watts, CW |
| Temperature Range | -55 to 90 °C @ 2.5 W, operating case temperature
linearly derated to 0 W @ 110 °C |
| Warranty | One Year |
- Mechanical dimensions
1 All parameters listed are typical unless max/min guaranteed limits are provided. The DC specs are based upon resistor tolerances and only when used with 50 Ω source and terminations.
Ordering information
Models
- PSPL5350
- Power Divider, 6 dB
Options
- PSPL5350 240JJJ
- 2.4 mm connectors, jacks (f)
- PSPL5350 292JJJ
- 2.92 mm connectors, jacks (f)