When the TG700 loses power+ all settings are lost including timing+ and IP address. Why are the settings not returned on power-up?
The original factory setting will be restored on power-up unless you have saved your settings.
The setting for power on condition can be saved by setting the instrument as desired, including signals, timing, IP address. Once set to your requirements, press the MODULES button until TG700 : PRESET is shown on the display. Then press the ENTER button, then the down arrow button, to get to:
TG700 : PRESET : SAVE
Power On Default
Press the ENTER button to save the settings.
이 FAQ는 다음에 적용 됩니다:
제품 시리즈 없음
FAQ ID 57936모든 FAQ 보기 »