질문:
What is the difference between the WFM6100+ 7000 and 7100?
답변:
Below is a summary of the differences between the WFM6100, 7000 and 7100:
| WFM6100 | WFM7000 | WFM7100 | |
| Product Category | Performance monitoring and measurement | Basic monitoring | Performance monitoring and measurement |
| XGA display, FlexVu, MyMenu | Yes | Yes | Yes |
| Video formats | SD, composite | HD, SD, composite | HD, SD, composite |
| Audio formats | Analog, embedded, AES/EBU, Dolby Digital, Dolby E | Analog, embedded, AES/EBU | Analog, embedded, AES/EBU, Dolby Digital, Dolby E |
| Fault detection, status, alarms, statistics, logging | Yes | Yes | Yes |
| Gamut, safe area grats, closed caption decode | Yes | Yes | Yes |
| CaptureVu | Yes | No | Yes |
| Measurement | Timing, Lightning, SDI signal analysis, digital data analysis | Timing, Lightning | Timing, Lightning, SDI signal analysis, digital data analysis |
Below is a summary of which options are available for each of the instruments.
| Option | Capability | WFM7100 | WFM7000 | WFM6100 |
| HD | Support for high definition (HD) digital video | Yes | Yes | Not Available |
| SD | Support for standard definition (SD) digital video | Yes | Yes | Yes |
| CPS | Support for composite analog video | Yes | Yes | Yes |
| DS | Support for digital audio (embedded and AES/EBU inputs) | Yes | Yes | Yes |
| AD | Capabilities in option DS plus analog audio monitoring | Yes | Yes | Yes |
| DD | Capabilities in option AD plus Dolby Digital (AC-3) monitoring | Yes | Not Available | Yes |
| DDE | Capabilities in option AD plus Dolby E monitoring | Yes | Not Available | Yes |
| EYE | Basic SDI signal measurement, Eye diagrams, jitter measurements, cable parameters | Yes | Not Available | Yes |
| PHY | Capabilities in option EYE plus jitter waveform and Eye parameter measurements | Yes | Not Available | Yes |
| DAT | Video and ancillary data analysis | Yes | Not Available | Yes |
이 FAQ는 다음에 적용 됩니다:
제품 시리즈 없음
제품:
FAQ ID 64166
모든 FAQ 보기 »