연락처

텍트로닉스 담당자와 실시간 상담 6:00am-4:30pm PST에 이용 가능

전화

전화 문의

9:00am-6:00PM KST에 이용 가능

다운로드

매뉴얼, 데이터 시트, 소프트웨어 등을 다운로드할 수 있습니다.

다운로드 유형
모델 또는 키워드

피드백

On the TDS200 series how do you scroll through the record?

질문:

On the TDS200 series how do you scroll through the record?

답변:

Unlike many digital scopes, TDS200's do not have selectable record length and therefore, provide only quasi scroll capability. The record is fixed at 2500 points and in normal operation all 2500 points are displayed on screen (i.e. the viewing window). Moreover, the trigger position is fixed at 50%.

Depending on mode, the horizontal position control can act like a wide-range control and give the "effect" of scrolling the viewing window to display up to 90% pre-trigger (- position) and unlimited post-trigger (+ position).

For continuous acquisitions this is like scrolling through an unlimited amount of post-trigger information.

For stopped acquisitions it acts like a normal (narrow range) position control or a HORIZ MAG if the timebase is advanced to faster time/div settings. MAG is a display mode - not a data mode.

For single shot acquisitions, it's like deciding (in advance) how long after the trigger you want to start viewing (i.e. how much post-trigger), setting + position accordingly, firing the shot and having the display begin delay time after the trigger.


이 FAQ는 다음에 적용 됩니다:

제품 시리즈 없음

제품:

FAQ ID 57596

모든 FAQ 보기 »