연락처

텍트로닉스 담당자와 실시간 상담 6:00am-4:30pm PST에 이용 가능

전화

전화 문의

9:00am-6:00PM KST에 이용 가능

다운로드

매뉴얼, 데이터 시트, 소프트웨어 등을 다운로드할 수 있습니다.

다운로드 유형
모델 또는 키워드

피드백

Remote Operation: What VISA Resource Name is required when using the KPCMCIA-GPIB card (Ines)?

Subject: Setup & Operation | Published: October 2026 | FAQ ID: KB-01459

Question: Remote Operation: What VISA Resource Name is required when using the KPCMCIA-GPIB card (Ines)?

Answer: Keithley IVI or VXI/PnP Instrument drivers will deploy a passport that enables the Ines PCMCIA GPIB card (KPCMICA-GPIB) to work with NI-VISA. Use the Keithley Configuration Panel to enable this installed passport.
For an instrument at address 16, a typcial resource name would be GPIB0::16::INSTR if using an ISA or PCI bus interface from Keithley, CEC or National Instruments.
When using the PCMCIA Ines card with the passport from Keithley, simply change this to GPIB1::16::INSTR.

Product Series: Keithley 2700 Multimeter/Data Acquisition/Switch Systems